According to the upstream man page (which we don't install), none of
libauditd's symbols are intended to be public. Also, I can't find any
evidence for a port that uses libauditd. Therefore, we should treat it like
other such libraries and use PRIVATELIB.
Reported by: phk
Reviewed by: cem, emaste
MFC after: 2 weeks
The bogus use could lead to an infinite loop depending on how fast the
audit_warn script to execute.
By fixing read(2) interruptibility, d060887 (r335899) revealed another bug
in auditd_wait_for_events. When read is interrupted by SIGCHLD,
auditd_reap_children will always return with errno set to ECHILD. But
auditd_wait_for_events checks errno after that point, expecting it to be
unchanged since read. As a result, it calls auditd_handle_trigger with bogus
stack garbage. The result is the error message "Got unknown trigger 48." Fix
by simply ignoring errno at that point; there's only one value it could've
possibly had, thanks to the check up above.
The best part is we've had a fix for this for like 18 months and just never
merged it. Merge it now.
PR: 234209
Reported by: Marie Helene Kvello-Aune <freebsd AT mhka.no> (2018-12)
Submitted by: asomers (2018-07)
Reviewed by: me (in OpenBSM)
Obtained from: OpenBSM
X-MFC-With: r335899
Security: ¯\_(ツ)_/¯
Differential Revision: https://github.com/openbsm/openbsm/pull/45
Co-mingling two things here:
* Addressing some feedback from Konstantin and Kyle re: jail,
capability mode, and a few other things
* Adding audit support as promised.
The audit support change includes a partial refresh of OpenBSM from
upstream, where the change to add shm_rename has already been
accepted. Matthew doesn't plan to work on refreshing anything else to
support audit for those new event types.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib
Relnotes: Yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22083
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
an empty string, instead of NULL, if an entry is missing in the audit_control
file. Because of that change the getachost() function started to return
success even if the host name was not defined in the audit_control.
This in turn led to auditd_hostlen always being set (for an empty host it was
set to 0). If auditd_hostlen was not equal to -1 we were trying to append
the host name to trail file name. All this led to situation where when host
name is not defined in audit_control, auditd will create trail files with
a leading '.', which breaks auditdistd as it doesn't work with longer audit
trail file names.
Fix this by appending host name to the trail file name only if the host name
is not empty.
The sender has .not_terminated file. It gets disconnected. The last trail
file is then terminated without adding new data (this can happen for example
when auditd is being stopped on the sender). After reconnect the .not_terminated
was not renamed on the receiver as it should.
We were already handling similar situation where the sender crashed and the
.not_terminated trail file was renamed to .crash_recovery. Extend this case to
handle the situation above.
move all elements from the adist_send and adist_recv lists back onto the
adist_free list, but we don't wake consumers waitings for the adist_free list
to become non-empty. This can lead to the sender process stopping audit trail
files distribution and waiting forever.
Fix the problem by adding the missing wakeup.
While here slow down spinning on CPU in case of a short race in
sender_disconnect() and add an explaination when it can occur.
PR: 201953
Reported by: peter
Approved by: re (kib)
file name and opening it. This race was not properly handled, because we were
copying new name before checking for openat(2) error and when we were trying
again we were starting with the next trail file. This could result in skipping
distribution of such a trail file.
Fix this problem by checking for ENOENT first (only for .not_terminated files)
and then updating (or not) tr_filename before restarting the search.
PR: 200139
Reported by: peter
Approved by: re (kib)
auditd_wait_for_events() relies on read(2) being interrupted by signals,
but it registers signal handlers with signal(3), which sets SA_RESTART.
That breaks asynchronous signal handling. It means that signals don't
actually get handled until after an audit(8) trigger is received.
Symptoms include:
* Sending SIGTERM to auditd doesn't kill it right away; you must send
SIGTERM and then send a trigger with auditon(2).
* Same with SIGHUP
* Zombie child processes don't get reaped until auditd receives a trigger
sent by auditon. This includes children created by expiring audit trails
at auditd startup.
Fix by using sigaction(2) instead of signal(3).
Cherry pick https://github.com/openbsm/openbsm/commit/d060887
PR: 229381
Reviewed by: cem
Obtained from: OpenBSM
MFC after: 2 weeks
Differential Revision: https://github.com/openbsm/openbsm/pull/36
Upstream change ed47534 consciously added some redundant functional
declarations, and I'm not sure why. AFAICT they were never required. On
FreeBSD, they break the build with GCC (but not Clang) for any program
including libbsm.h with WARNS=6.
Fix by cherry-picking upstream change
https://github.com/openbsm/openbsm/commit/0553c27
Reported by: emaste
Reviewed by: cem
Obtained from: OpenBSM
MFC after: 2 weeks
Pull Request: https://github.com/openbsm/openbsm/pull/31
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
- Add a new "qsize" parameter in audit_control and the getacqsize(3) API to
query it, allowing to set the kernel's maximum audit queue length.
- Add support to push a mapping between audit event names and event numbers
into the kernel (where supported) using new A_GETEVENT and A_SETEVENT
auditon(2) operations.
- Add audit event identifiers for a number of new (and not-so-new) FreeBSD
system calls including those for asynchronous I/O, thread management, SCTP,
jails, multi-FIB support, and misc. POSIX interfaces such as
posix_fallocate(2) and posix_fadvise(2).
- On operating systems supporting Capsicum, auditreduce(1) and praudit(1) now
run sandboxed.
- Empty "flags" and "naflags" fields are now permitted in audit_control(5).
Many thanks to Christian Brueffer for producing the OpenBSM release and
importing/tagging it in the vendor branch. This release will allow improved
auditing of a range of new FreeBSD functionality, as well as non-traditional
events (e.g., fine-grained I/O auditing) not required by the Orange Book or
Common Criteria.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, AFRL
MFC after: 3 weeks
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The adist_remote_lock is not held in this place, whereas the
adist_recv_list_lock lock is and is picked up during the next iteration.
I found this by annotating our libpthread with Clang's -Wthread-safety
attributes. I will send out a patch for this in the nearby future,
because it's awesome.
MFC after: 2 weeks
int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen);
int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen);
which allow to bind and connect respectively to a UNIX domain socket with a
path relative to the directory associated with the given file descriptor 'fd'.
- Add manual pages for the new syscalls.
- Make the new syscalls available for processes in capability mode sandbox.
- Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on
the directory descriptor for the syscalls to work.
- Update audit(4) to support those two new syscalls and to handle path
in sockaddr_un structure relative to the given directory descriptor.
- Update procstat(1) to recognize the new capability rights.
- Document the new capability rights in cap_rights_limit(2).
Sponsored by: The FreeBSD Foundation
Discussed with: rwatson, jilles, kib, des
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
reconnected in the meantime. Check if reset is set before opening next trail
file, as not doing so will result in sending OPEN message with the same
file name twice and this is illegal - the second OPEN is send without first
closing previous trail file.
included various upstreamed patches from the FreeBSD base to make OpenBSM
compile more easily with bmake, higher warning levels, clang, and several
other loose ends.
Obtained from: TrustedBSD Project
leak when iterating over possible audit trail directories. This fix will
be merged upstream in an identical form, but hasn't yet appeared in an
OpenBSM release.
Submitted by: guido
Obtained from: TrustedBSD Project
MFC after: 3 days
addresses several minor issues:
- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
- Fix build on Linux.
- Fix printing of class masks in the audump tool.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Approved by: re (kib)
contrib/openbsm and a subset also imported into sys/security/audit.
This patch release addresses several minor issues:
- Fixes to AUT_SOCKUNIX token parsing.
- IPv6 support for au_to_me(3).
- Improved robustness in the parsing of audit_control, especially long
flags/naflags strings and whitespace in all fields.
- Add missing conversion of a number of FreeBSD/Mac OS X errnos to/from BSM
error number space.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
Approved by: re (kib)
OpenBSM history for imported revision below for reference.
MFC after: 2 weeks
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1
- Change auditon(2) parameters and data structures to be 32/64-bit architecture
independent. Add more information to man page about auditon(2) parameters.
- Add wrapper functions for auditon(2) to use legacy commands when the new
commands are not supported.
- Add default for 'expire-after' in audit_control to expire trail files when
the audit directory is more than 10 megabytes ('10M').
- Interface to convert between local and BSM fcntl(2) command values has been
added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
definitions of constants in audit_fcntl.h.
- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
generated by audit_submit(3) were improperly encoded has been fixed.
- Fix example in audit_submit(3) man page. Also, make it clear that we want
the audit ID as the argument.
- A new audit event class 'aa', for post-login authentication and
authorization events, has been added.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).
OpenBSM history for imported revision below for reference.
MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 beta 1
- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Hook up bsm_domain.c and bsm_socket_type.c to the libbsm
build along with man pages, add audit_bsm_domain.c and
audit_bsm_socket_type.c to the kernel environment.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 5
- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
contrib/openbsm (svn merge) and sys/{bsm,security/audit} (manual merge).
- Add OpenBSM contrib tree to include paths for audit(8) and auditd(8).
- Merge support for new tokens, fixes to existing token generation to
audit_bsm_token.c.
- Synchronize bsm includes and definitions.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
--
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not being arguments so
that const strings can be passed as arguments to tokens. This patch was
submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
since the last import:
OpenBSM 1.0
- Fix bug in auditreduce(8) which resulted in a memory fault/crash when
the user specified an event name with -m.
- Remove AU_.* hard-coded audit class constants, as udit classes are now
entirely dynamically configured using /etc/security/audit_class.
MFC after: 3 days
Obtained from: TrustedBSD Project
