This file has only generated a warning for the last 18 months. Its
existence at this point only serves to confuse software looking for
POSIX.1e capabilities and produce actionless warnings.
GNU grep as in actually in base does not have any translations support
compiled in, so no functionnality loss.
We do support 193 locales in base, we will never catch up on that number of
translation with bsd grep.
Removing NLS support make bsd grep consistent with the other binaries in base
which are not translated, and also reduce a little bit the code.
Reviewed by: kevans
Approved by: kevans
Discussed with: kevans @BSDCan
Differential Revision: https://reviews.freebsd.org/D15682
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
Remove sys/modules/ixgb and add the linked man page for if_ixgb via
ObsoleteFiles.
Submitted by: kbowling
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15273
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
When we had both groff and mandoc in base, we decided to keep the roff(7)
manpage from groff. when remoing groff, we forgot to install the mandoc version
instead.
This fixes it.
Reported by: trasz
MFC after: 1 week
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
efi.4th was added to ObsoleteFiles and disconnected from the build, but not
removed from hte repo. We've since found a mild use for it that makes some
amount of sense, so partially revert r328780 and bring it back to life.
Reported by: many
X-MFC-With: r331326
It has been replaced by /boot/dtb/overlays. We haven't yet populated it with
any of our own overlays, so no further damage from here.
Reported by: Oliver Pinter <oliver.pinter@hardenedbsd.org>
only installed on arm and sparc64.
It is the only bits that keeps us having libreadline in base
The rest of gdb can be switched to libedit and will be in another
commit
I had thought that this would be useful. However it was committed too
late, and wound up being unused. It's in the way of future work now,
so retire it rather than bring it forward.
loader scripts. However, that path won't be taken after all it
seems. Remove this code before it decays into uselessness. Also remove
build dependencies on forth no longer needed.
6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
I'm leaving readonly_test and nokey_test alone for now. In a future commit
they should be broken up into several smaller test cases and distributed
between multiple files.
Reviewed by: ngie
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13717
We use /usr/share/skel instead of /etc/skel. The existence of /etc/skel
has confused people.
PR: 46062 (submitted 2002-12-07)
PR: 218897
Submitted by: carl@slackerbsd.org
Submitted by: asv@inhio.net
Now that the POSIX working group is going to require that basename(3)
and dirname(3) are thread-safe in future revisions of the standard,
there is even less of a need to provide basename_r(3). Remove this
function to prevent people from writing code that only builds on
FreeBSD and Bionic.
Removing this function seems to break exactly one port: sbruno@'s
qemu-user-static. I will send him a pull request on GitHub in a bit.
__FreeBSD_version will not be bumped, as any value from 2017 can be used
to test for the presence of a thread-safe basename(3)/dirname(3).
PR: https://bugs.freebsd.org/224016
xlint is currently a fossil. We have much more useful and alive tools
to do now what xlint did twenty years ago.
I did not cleared some stuff which makes lint operational, in
sys/x86/include and sys/sys, but I might do it as followup. The
x86/include/ucontext.h and _types.h hacks made to please lint was the
main reason for my initial proposal to classify xlint as obsolete and
to remove it.
Also I do not intend to clear sccs ids.
Reviewed by: bapt, brooks, emaste, jhb, pfg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13015
The information here is somewhere between ancient to obsolete.
It refers to a time in the internet's history when manual routing
was still useful, talks about UUCP as if its modern, and refers
to documents which I had trouble tracking down.
It seems unlikely that a manual page in this form would be useful, so
just remove it.
Reviewed By: imp, tsoome, bdrewery(?)
Differential Revision: https://reviews.freebsd.org/D12924
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated. Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.
Discussed with: bde (who does not like the removal)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Despite the fact that it's a working solution, it doesn't follow the design
philosophy of only doing TARGET_* in Makefile.inc1 and special locations in
the source tree.
PR: 222925
Requested by: imp
- Define TARGET_CPUARCH and use in libclang_rt as the basis for CRTARCH
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
If TARGET_ARCH isn't defined (host-builds), fallback to MACHINE_ARCH.
- Define CRTARCH to armhf when TARGET/TARGET_ARCH are set to arm/armv[67]
TARGET_ABI/TARGET_CPU in Makefile.inc1 sets the ABI to gnueabihf, which
affects the clang lookup path per `getArchNameForCompilerRTLib(..)` in
contrib/llvm/tools/clang/lib/Driver/ToolChain.cpp, so chase clang and
Linux's assumed naming convention for hard-float arm architectures.
CROSSENV (in Makefile.inc1) sets CPUTYPE/MACHINE(_ARCH)? to the
TARGET*-relevant values when building the `libraries` target, so test
those variables instead.
- Add OLD_FILES/OLD_LIBS entries for TARGET/TARGET_ARCH == arm/armv[67]. This
impacts only arm/armv6 and arm/armv7.
PR: 222925
respected.
Please notice that libcasper is already in ObsoleteFiles so we don't add it
again.
Reported by: Herbert J. Skuhra <herbert@mailbox.org>
Reviewed by: bdrewery@
Differential Revision: https://reviews.freebsd.org/D12918
mbpool existed to support NICs with memory interfaces and all remaining
comsumers were removed earlier this year with NATM.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10513
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
It was supposed to provide a recovery mechanism against bugs in procfs's
long deprecated tracing capabilities.
Remove the tool as a prerequisite to axing the kernel side.
The tracing facility to use is ptrace(2).
MFC after: 2 weeks
In base, locales (and encoding) specific directories are not used
by any tool. Just remove them.
While here also remove the cat page directory for openssl
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
- Store the symbol table contents in an anonymous swap-backed object. Have
mmap(/dev/ksyms) map that object, and stop mapping the symbol table into
the calling process in ksyms_open(). Previously we would cache a pointer
to the pmap of the opening process, and mmap(/dev/ksyms) would create a
mapping using the physical address found by a pmap lookup at the initial
mapping address. However, this assumes that the cached pmap is valid,
which may not be the case. [1]
- Remove the ksyms ioctl interface. It appears to have been added to work
around a limitation in libelf that no longer exists; see r321842.
Moreover, the interface is difficult to support and isn't present in
illumos. Since ksyms was added specifically to support lockstat(1), it
is expected that this removal won't have any real impact.
- Simplify ksyms_read() to avoid unnecessary copying.
- Don't call the device handle destructor if we fail to capture a snapshot
of the kernel's symbol table. devfs will do that for us.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com> [1]
Reviewed by: kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11789
The tests are largely symmetric with the tests for chmod(1)--added in r319642.
Remove chown-f_test (added in r268030) since the test coverage is now being
provided by `chown_test`.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
The documentation moved to section 3 several years ago, but
'man cap_rights_get' pulls up cap_rights_limit(2) (which is
MLINKed to cap_rights_get.2) instead of cap_rights_get(3).
MFC after: 1 week
In FreeBSD we only use mdoc(7) format. A template is available as mdoc.template
The usage of man(7) format is discouraged and this file was driving people into
the front direction as a template to use.
roff documentation from the build.
Those documents will be added to the doc tree and distributed as PDF from
the documentation website. As they are valuable has history, but do not match
current FreeBSD
Further more, the ascii format we were using to distribute them is not really
accurate for such documents.
more details:
https://lists.freebsd.org/pipermail/freebsd-arch/2017-May/018211.html
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
