An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
SCTP. They are based on what is specified in the Solaris DTrace manual
for Solaris 11.4.
Reviewed by: 0mp, dteske, markj
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16839
Some background: in the GSoC project, libbe/Makefile lived in lib/libbe. I
created projects/bectl branch, maintained the above for all of five
minutes before I misread Makefile.inc1 and decided that it couldn't possibly
build outside of cddl/, so I kicked the Makefile out into the cddl/ build
and all was good. The misreading was of the bit where .WAIT is added to
SUBDIR after lib, libexec but prior to building bin and cddl *only during
the install targets*, which is the critical part.
Fast forward- buildworld was still broken in my branch unbeknownst to me
because I didn't nuke my OBJDIR. Combing through Makefile.inc1 eventually
revealed the necessary magic to make sure that libbe's dependencies are
specified well enough, and it becomes clear what needs done to make a
non-cddl/ build work. This is an interesting prospect, because the build
split is kind of annoying to work with.
IGNORE_PRAGMA is added to avoid dropping WARNS by one more. This was
previously pulled in via cddl/Makefile.inc.
These were previously necessary because the libnvpair and libzfs_core
includes were not installed into the SYSROOT, being a part of the copies
target in include/Makefile rather than being installed with the library.
This was fixed in r337696 and the headers are now installed properly, so we
may let go of the cruft.
While nothing was wrong with libnvpair.h, libzfs_core.h was only guarded by
MK_CDDL rather than MK_CDDL && MK_ZFS. Rather than ugl'if'ying
include/Makefile to impose the extra restriction, just move the non-sys/
includes into INCS with the respect lib builds.
This has the added bonus of allowing third party packagers to try and split
these libs out of the FreeBSD-runtime package, if they are so inclined.
The sys/ include was left alone- generally userland libraries shouldn't
install kernel headers.
MFC after: 1 week
- Missing include path
- Fully specify libzfs's dependencies (except for deps pulled in by other
deps) in Makefile.inc1
- Drop WARNS back down to 2 for libbe(3). I do this with much hesitation,
but the libzfs headers are apparently a hot warning-filled mess as far as
GCC 4.2 is concerned.
The dtrace provider for UDP-Lite is modeled after the UDP provider.
This fixes the bug that UDP-Lite packets were triggering the UDP
provider.
Thanks to dteske@ for providing the dwatch module.
Reviewed by: dteske@, markj@, rrs@
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16377
Based on the idea that we shouldn't have all-new library and utility going
into base that need WARNS=1...
- Decent amount of constification
- Lots of parentheses
- Minor other nits
In some cases, the required information is not available and the
UDP provider reported an empty string in this case and the IP
and TCP provider reported a NULL pointer.
This patch changes the value provided in this case to the string
"<unknown>". This make the behaviour consistent and in-line with
the behaviour of Solaris.
Reviewed by: markj@, dteske@, gnn@
Differential Revision: https://reviews.freebsd.org/D15855
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
+ Add missing signals SIGTHR (32) and SIGLIBRT (33)
+ Add inline for converting SIG* int to string
+ Add inline for converting CLD_* int to string
Reviewed by: markj
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D14497
+ Add dev_type do devinfo_t
+ Add b_cmd to bufinfo_t
+ Add constants for BIO_* and DEVSTAT_TYPE_*
+ Add inline for converting BIO_* int to string
+ Add inline for converting DEVSTAT_TYPE_* int to string
+ Add mask for dev_type & DEVSTAT_TYPE_MASK to string
+ Add mask for dev_type & DEVSTAT_TYPE_IF_MASK to string
Reviewed by: markj
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D14396
illumos/illumos-gate@0a0551200e0a0551200ehttps://www.illumos.org/issues/640
du(1), df(1m), ls(1), and swap(1m) all include a copy (it appears literally
copied) of the 'number_to_scaled_string' function in their source. This should
be moved to a shared library and all 4 commands should use this instead.
FreeBSD note: of all libcmdutils functionality ZFS (and other illumos
contrib code) currently uses only nicenum() function (which is similar
to humanize_number but has some formatting differences). For this
reason I decided to not port the whole library. As a result, nicenum.c
from libcmdutils is compiled into libzfs and libzpool. This is a bit
ugly, but works. If one day we are forced to create libillumos, then
the file should be moved to that library.
Reviewed by: Sebastian Wiedenroth <wiedi@frubar.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Jason King <jason.brian.king@gmail.com>
MFC after: 2 weeks
7431 ZFS Channel Programs
illumos/illumos-gate@dfc115332cdfc115332chttps://www.illumos.org/issues/7431
ZFS channel programs (ZCP) adds support for performing compound ZFS
administrative actions via Lua scripts in a sandboxed environment (with time
and memory limits).
This initial commit includes both base support for running ZCP scripts, and a
small initial library of API calls which support getting properties and
listing, destroying, and promoting datasets.
Testing: in addition to the included unit tests, channel programs have been in
use at Delphix for several months for batch destroying filesystems. The
dsl_destroy_snaps_nvl() call has also been replaced with
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <chris.williamson@delphix.com>
8552 ZFS LUA code uses floating point math
illumos/illumos-gate@916c8d8811916c8d8811https://www.illumos.org/issues/8552
In the LUA interpreter used by "zfs program", the lua format() function
accidentally includes support for '%f' and friends, which can cause compilation
problems when building on platforms that don't support floating-point math in
the kernel (e.g. sparc). Support for '%f' friends (%f %e %E %g %G) should be
removed, since there's no way to supply a floating-point value anyway (all
numbers in ZFS LUA are int64_t's).
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
8590 memory leak in dsl_destroy_snapshots_nvl()
illumos/illumos-gate@e6ab4525d1e6ab4525d1https://www.illumos.org/issues/8590
In dsl_destroy_snapshots_nvl(), "snaps_normalized" is not freed after it is
added to "arg".
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBSD notes:
- zfs-program.8 manual page is taken almost as is from the vendor repository,
no FreeBSD-ification done
- fixed multiple instances of NULL being used where an integer is expected
- replaced ETIME and ECHRNG with ETIMEDOUT and EDOM respectively
This commit adds a modified version of Lua 5.2.4 under
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/lua, mirroring the
upstream. See README.zfs in that directory for the description of Lua
customizations.
See zfs-program.8 on how to use the new feature.
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12528
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
This simplifies make logic/output
While here, remove bogus CFLAGS which look for headers in cddl/lib/libumem.
There aren't any source files there (just Makefiles)
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Also save only high bits in the ipv4_flags, because it is defined
as uint8_t. So now it will show DF and MF flags as 0x40 and 0x20.
Reviewed by: markj@
MFC after: 1 week
This change adds some handling for the equivalent of Solaris' PGRAB_*
flags. In particular, support for PGRAB_RDONLY is needed to avoid a
nasty deadlock: dtrace(1) may otherwise stop the master process for its
pseudo-terminal and end up blocking while writing to standard output.
When looking up an object by name, allow prefix matches if no direct match
is found. This allows one to, for example, match libc entry probes with:
# dtrace -n 'pid$target:libc.so::entry' -c ./foo
instead of requiring "libc.so.7" or a glob.
Also remove proc_obj2map() as it currently just duplicates the
functionality of proc_name2map(). It's supposed to take a Solaris
link-map ID as a paramter, but support for this isn't implemented and
isn't required to support DTrace's pid provider.
7085 add support for "if" and "else" statements in dtrace
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Relnotes: yes
setting a 32 bit value on each socket. This can be used by applications
and DTrace as a rendezvous point so that an applicaton's data can
more easily be captured at run time. Expose the user cookie via
DTrace by updating the translator in tcp.d and add a quick test
program, a TCP server, that sets the cookie on each connection
accepted.
Reviewed by: hiren
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D7152
cddl/lib/libavl/Makefile
cddl/lib/libctf/Makefile
cddl/lib/libnvpair/Makefile
cddl/lib/libumem/Makefile
cddl/lib/libuutil/Makefile
Increase WARNS to the highest working level for each of these
libraries
Approved by: re (gjb, hrs)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
