Directory entries must be padded to maintain alignment; in many
filesystems the padding was not initialized, resulting in stack
memory being copied out to userspace. With the ino64 work there
are also some explicit pad fields in struct dirent. Add a subroutine
to clear these bytes and use it in the in-tree filesystems. The
NFS client is omitted for now as it was fixed separately in r340787.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
pathconf(2) and fpathconf(2) both return a long. The kern_[f]pathconf()
functions now accept a pointer to a long value rather than modifying
td_retval directly. Instead, the system calls explicitly store the
returned long value in td_retval[0].
Requested by: bde
Reviewed by: kib
Sponsored by: Chelsio Communications
On the one hand, FIFOs should respect other variables not supported by
the fifofs vnode operation (such as _PC_NAME_MAX, _PC_LINK_MAX, etc.).
These values are fs-specific and must come from a fs-specific method.
On the other hand, filesystems that support FIFOs are required to
support _PC_PIPE_BUF on directory vnodes that can contain FIFOs.
Given this latter requirement, once the fs-specific VOP_PATHCONF
method supports _PC_PIPE_BUF for directories, it is also suitable for
FIFOs permitting a single VOP_PATHCONF method to be used for both
FIFOs and non-FIFOs.
To that end, retire all of the FIFO-specific pathconf methods from
filesystems and change FIFO-specific vnode operation switches to use
the existing fs-specific VOP_PATHCONF method. For fifofs, set it's
VOP_PATHCONF to VOP_PANIC since it should no longer be used.
While here, move _PC_PIPE_BUF handling out of vop_stdpathconf() so that
only filesystems supporting FIFOs will report a value. In addition,
only report a valid _PC_PIPE_BUF for directories and FIFOs.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D12572
Add a new TMPFS_LINK_MAX to use in place of LINK_MAX for link overflow
checks and pathconf() reporting. Rather than storing a full 64-bit
link count, just use a plain int and use INT_MAX as TMPFS_LINK_MAX.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
Sponsored by: Chelsio Communications
Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations. Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs. Now fail with EINVAL to
indicate hard links aren't supported.
Requested by: bde (though perhaps not this exact implementation)
Reviewed by: kib (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Update filesystems not currently using vop_stdpathconf() in pathconf
VOPs to use vop_stdpathconf() for any configuration variables that do
not have filesystem-specific values. vop_stdpathconf() is used for
variables that have system-wide settings as well as providing default
values for some values based on system limits. Filesystems can still
explicitly override individual settings.
PR: 219851
Reported by: cem
Reviewed by: cem, kib, ngie
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11541
The option "nonc" disables using of namecache for the created mount,
by default namecache is used. The rationale for the option is that
namecache duplicates the information which is already kept in memory
by tmpfs. Since it believed that namecache scales better than tmpfs,
or will scale better, do not enable the option by default. On the
other hand, smaller machines may benefit from lesser namecache
pressure.
Discussed with: mjg
Tested by: pho (as part of larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
For directories, node->tn_spec.tn_dir.tn_parent pointer to the parent
is used. For non-directories, the implementation is naive, all
directory nodes are scanned to find a dirent linking the specified
node. This can be significantly improved by maintaining tn_parent for
all nodes, later.
Tested by: pho (as part of larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
On dotdot lookup and fhtovp operations, it is possible for the file
represented by tmpfs node to be removed after the thread calculated
the pointer. In this case, tmpfs_alloc_vp() accesses freed memory.
Introduce the reference count on the nodes. The allnodes list from
tmpfs mount owns 1 reference, and threads performing unlocked
operations on the node, add one transient reference. Similarly, since
struct tmpfs_mount maintains the list where nodes are enlisted,
refcount it by one reference from struct mount and one reference from
each node on the list. Both nodes and tmpfs_mounts are removed when
refcount goes to zero.
Note that this means that nodes and tmpfs_mounts might survive some
time after the node is deleted or tmpfs_unmount() finished. The
tmpfs_alloc_vp() in these cases returns error either due to node
removal (tn_nlinks == 0) or because of insmntque1(9) error.
Tested by: pho (as part of larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Remove TMPFS_ASSERT_ELOCKED(). Its claims are already stated by other
asserts nearby and by VFS guarantees.
Change TMPFS_ASSERT_LOCKED() and one inlined place to use
ASSERT_VOP_(E)LOCKED() instead of hand-rolled imprecise asserts.
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Edit comments which explain no longer relevant details, and add
locking annotations to the struct tmpfs_node members.
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If tmpfs vnode is only shared locked, tn_status field still needs
updates to note the access time modification. Use the same locking
scheme as for UFS, protect tn_status with the node interlock + shared
vnode lock.
Fix nearby style.
Noted and reviewed by: mjg
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is otherwise left dangling, and callers that request cookies always free
the cookie buffer, even when VOP_READDIR(9) returns an error. This results
in a double free if tmpfs_readdir() returns an error to the NFS server or
the Linux getdents(2) emulation code.
Reported by: pho
MFC after: 1 week
Security: double free of malloc(9)-backed memory
Sponsored by: EMC / Isilon Storage Division
For VREG vnodes, return the resident page count (multiplied by PAGE_SIZE)
for the tmpfs node's anonymous VM object that stores actual file contents.
For all other vnodes, return the tmpfs_node's tn_size, which should not
be rounded to a page.
This change allows using stat(2) to identify a sparse file on tmpfs.
Reviewed by: kib
MFC after: 1 week
modification and last file status change timestamps of the file".
Currently, tmpfs only modifies ctime when file was extended. Since
r277828 followed tmpfs_write(), mmaped writes also do not modify
ctime.
Fix this, by updating both ctime and mtime for writes to tmpfs files.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
to UFS, perform updates during syncer scans, which in particular means
that tmpfs now performs scan on sync. Also, this means that a mtime
update may be delayed up to 30 seconds after the write.
The vm_object' OBJ_TMPFS_DIRTY flag for tmpfs swap object is similar
to the OBJ_MIGHTBEDIRTY flag for the vnode object, it indicates that
object could have been dirtied. Adapt fast page fault handler and
vm_object_set_writeable_dirty() to handle OBJ_TMPFS_NODE same as
OBJT_VNODE.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
forcing filesystem VOP_LINK() methods to repeat the code. In
tmpfs_link(), remove redundand check for the type of the source,
already done by VFS.
Note that NFS server already performs this check before calling
VOP_LINK().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
In particular, vnode must be exclusively locked when the tmpfs vnode
and object are divorced. When the vnode is opened, the object must be
still alive, since only live vnode can be opened, and the tmpfs node
owns a reference on the object.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
a vnode until it is verified that the vnode indeed belongs to tmpfs
mount. Otherwise, it might access random memory, at least in the
debug kernel.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
permissions test, forgotten in r164033.
Refactor the permission checks for utimes(2) into vnode helper
function vn_utimes_perm(9), and simplify its code comparing with the
UFS origin, by writing the call to VOP_ACCESSX only once. Use the
helper for UFS(5), tmpfs(5), devfs(5) and msdosfs(5).
Reported by: bde
Reviewed by: bde, trasz
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
lookup cookies to be less obscure.
No functional change.
Since r245115, cnt has not really been needed in tmpfs_dir_getdents(). Keep
it for the MPASS() for now though.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.
Before this patch is reinserted we need to break this ordering.
Sponsored by: EMC / Isilon storage division
Reported by: kib
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages
Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).
After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).
Fixing such primitive can bring to complete removal of the page hold
mechanism.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff
Tested by: pho
kern_sendfile() which is unnecessary.
The page is already wired so it will not be subjected to pagefault.
The content cannot be effectively protected as it is full of races
already.
Multiple accesses to the same indexes are serialized through vn_rdwr().
Sponsored by: EMC / Isilon storage division
Reviewed by: alc, jeff
Tested by: pho
the page. This both reduces the number of queues locking and avoids
moving the active page to inactive list just because the page was read
or written.
Based on the suggestion by: alc
Reviewed by: alc
Tested by: pho
insmntque() is called. The standard insmntque destructor resets the
vop vector to deadfs one, and calls vgone() on the vnode. As result,
v_object is kept unchanged, which triggers an assertion in the reclaim
code, on instmntque() failure. Also, in this case, OBJ_TMPFS flag on
the backed vm object is not cleared.
Provide the tmpfs insmntque() destructor which properly clears
OBJ_TMPFS flag and resets v_object.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
vnode v_object to avoid double-buffering. Use the same object both as
the backing store for tmpfs node and as the v_object.
Besides reducing memory use up to 2x times for situation of mapping
files from tmpfs, it also makes tmpfs read and write operations copy
twice bytes less.
VM subsystem was already slightly adapted to tolerate OBJT_SWAP object
as v_object. Now the vm_object_deallocate() is modified to not
reinstantiate OBJ_ONEMAPPING flag and help the VFS to correctly handle
VV_TEXT flag on the last dereference of the tmpfs backing object.
Reviewed by: alc
Tested by: pho, bf
MFC after: 1 month
