In line_update(), set lastcol correctly after moving to any non-zero
column, so the "overwrite old stuff" part does not attempt to address
negative offsets in the current line.
Rewrite setup_buffer() to always allocate at least 80 characters,
otherwise various calls to summary_format() will overwrite the end of
the buffers, if the screen width gets small enough.
MFC after: 1 week
1 second as allowed by RFC 6298.
Reviewed by: kbowling@, Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18941
Unlike illumos, FreeBSD cv_timedwait requires a relative timeout. That
applies both to the kernel illumos compatibility code and to the
userland "fake kernel" code.
MFC after: 2 weeks
Sponsored by: Panzura
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
The data structure implements non-intersecting intervals over the [0,
UINT64_MAX] range, and supports fast insert, predicated clearing of
subrange, and lookup of an interval containing the specified address.
Internally it is a pctrie over the interval start addresses.
Implementation provides additional guarantees over the structure state
in case of memory allocation failures.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
calendar(1) can have input in various encoding, specifying
LANG=<locale_name> to enable calendar(1) to determine which one to use.
The problem is the content of the calendar itself is exposed as is making it
unreadable in many cases. For example french calendar which is encoded
ISO8859-1 is rendered badly in a fr_FR.UTF-8 environment.
Using iconv allows to solve this issue.
This will also allow to keep only 1 encoding in base for those files without
breaking user existing setup
Reported by: many
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19221
When I added support for the standard loader(8) disk0s2a: type formats,
the parsing of legacy format was broken because it also contains a colon,
but it comes before the slice and partition. That would cause disk_parsedev()
to return success with the slice and partition set to wildcard values.
This change examines the string first, and if it contains spaces, dots, or
a colon at any position other than the end, it must be a legacy-format
string and we don't even try to use disk_parsedev() on it.
Reported by: Manuel Stuhn
Take a pass through fixing some of the most egregious whitespace issues in
fs/fuse. Also fix some style(9) warts while here. Not 100% cleaned up, but
somewhat less painful to look at and edit.
No functional change.
idle_td is dereferenced without thread-locking it to make its contents is
invariant, and was accessed without telling the compiler that its contents
is invariant. Some compilers optimized accesses to the supposedly invariant
contents by moving the critical checks for changes outside of the loop that
waits for changes. Fix this using atomic ops.
This bug only showed up for the following configuration: a Turion2
system, amd64 kernels, compiled by gcc, and SCHED_4BSD. clang fails
to do the optimization with all CFLAGS that I tried, because it doesn't
fully optimize the '__asm __volatile' for cpu_spinwait() although this
asm has no memory clobber. gcc only does the optimization with most
CFLAGS. I mostly used -Os with all compilers. i386 works because gcc
-m32 -Os only moves 1 or the 2 accesses outside of the loop.
Non-Turion2 systems and SCHED_ULE worked due to different timing (when
all APs start before the BP checks them outside of the loop).
Reviewed by: kib
The flag for the driver capability of supporting the fix is independent
of the flag for cons25 mode so that it can be managed independently, but
I forget to preserve it when resetting the terminal.
a vdev that has the same name as the one stored in metadata and that has
all VDEV labels in place. If it cannot find a GEOM provider with the given
name and all VDEV labels it will scan all GEOM providers for the best match
(the most VDEV labels available), but here the name is ignored.
In case the ZFS pool is created, eg. using GPT partition label:
# zpool create tank /dev/gpt/tank
everything works, and on every import ZFS will pick /dev/gpt/tank and
not /dev/da0p4.
The problem occurs when da0p4 is extended and ZFS is unable to find all
VDEV labels in /dev/gpt/tank anymore (the VDEV labels stored at the end
of the partition are now somewhere else). In this case it will scan all
GEOM providers and will pick the first one with the best match, ie. da0p4.
Fix this problem by checking the VDEV/provider name even if we get the same
match. If the name is the same as the one we have in pool's metadata, prefer
this GEOM provider.
Reported by: oshogbo, Michal Mroz <m.mroz@fudosecurity.com>
Tested by: Michal Mroz <m.mroz@fudosecurity.com>
Obtained from: Fudo Security
In short, the prior code was far too simplistic when it came to calling recv(2)
and failed intermittently (or in the case of Jenkins, deterministically).
Handle short recv(2)s by checking the return code and incrementing the window
into the buffer by the number of received bytes. If the number of received
bytes <= 0, then bail out of the loop, and test the total number of received
bytes vs the expected number of bytes sent for equality, and base whether or
not the test passes/fails on that fact.
Remove the expected failure, now that the hdtr testcases deterministically pass
on my host after this change [1].
PR: 234809 [1], 235200
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19188
Right now it's possible to invoke the REP escape sequence with a maximum
of tens of millions of iterations. In practice, there is never any need
to do this. Calling it more frequently than the number of cells in the
terminal hardly makes any sense. By placing a limit on it, we can
prevent users from exhausting resources in inside the terminal emulator.
As support for this escape sequence is not present in any of the stable
branches, there is no need to MFC.
Reported by: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11255
The DIOCGETZONE ioctl can be used to fetch the zone list of an SMR
drive, and the caller specifies the number of entries it wants to fetch.
Clamp the caller's request to a sane limit so that a user cannot attempt
large allocations. Callers already need to invoke the ioctl multiple
times to fetch the full list in general, so there's no harm in limiting
the number of entries returned.
Fix style while here.
admbug: 807
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: asomers, ken
Tested by: ken
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19249
Otherwise a privileged user can trigger a memory allocation of
unbounded size, or an integer overflow in the subsequent
geom_alloc_copyin() call, leading to out-of-bounds accesses.
Hard-code a large limit to circumvent this problem.
admbug: 854
Reported by: Anonymous of the Shellphish Grill Team
Reviewed by: ae
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19251
pass of fsck_ffs. Some changes, such as check-hash corrections were
being lost.
Reported by: Michael Tuexen (tuexen@)
Tested by: Michael Tuexen (tuexen@)
MFC after: 3 days
When dropping a fragment queue, account for the number of fragments in the
queue. This improves accounting between the number of fragments received and
the number of fragments dropped.
Reviewed by: jtl, bz, transport
Approved by: jtl (mentor), bz (mentor)
Differential Revision: https://review.freebsd.org/D17521
Per discussions on arch@ and elsewhere, the maintenance of this code
has moved to the drm-kmod and drm-legacy-kmod ports. Remove the i915
and radeon drivers from the tree.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
Remove support for compiling drm2 as a module. This has transitioned
to the drm-kmod or drm-legacy-kmodw ports.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
Retire the drm modules / drivers. These are now handled by the
drm-legacy-kmod port and/or the drm-kmod port. All future
development and maintanace will be handled there.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
This was discovered through examination -- acl_copy_entry() copies the
tag type and permset fields.
Reviewed by: trasz, pfg
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D19240
Improve help text to include example release numbers for reference
and clarify the -F option.
PR: 231185, 214619
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reviewed by: delphij, rgrimes
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18944
