There is no need to call it evert 10ms when we need 1s granularity.
Update to update the time every second.
Reviewed by: imp, manu, tsoome
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D30227
When VECTX is enabled as a kernel option and non-EFI loaders are
built, many reads will fail due to the mis-match of whether
LOADER_VERIEXEC_VECTX or not in readin.h. Source that includes
bootstrap.h must ensure the kernel option agrees with the compile
time CFLAGS in the various make related files.
Submitted by: bret_ketchum@dell.com (original revision)
Reviewed by: sjg, bdrewery, dab, bret_ketchum@dell.com
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D29993
Until now, the boot image can be embedded into the loader with
/sys/tools/embed_mfs.sh, and memory disk (MD) is already supported
in loader source. But due to memory disk (MD) driver isn't registered
to the loader yet, the boot image can't be boot from embedded memory
disk.
Reviewed by: dab, tsoome
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D29512
Add a man page for gptboot.efi. Describe when and how to use this as it differs
from the BIOS cases. Include cross reference for the preferred method described
in efibootmgr(8) as well as cross links in both gptboot(8) and gptboot.efi(8) to
the other.
This man page was heavily copied from the gptboot.8 man page by Warren Block.
They are different enough to need separate man pages for clarity, but there's
enough similarity that I worry about the duplication. In the really long term,
gptboot(8) will disappear, so having the same info here will help when that
day comes. In the short to medium term, the information is likely to not
change in gptboot(8) and any changes to gptboot.efi(8) will be easier to
make in a separate copy.
loader.efi(8) needs a complete rewrite from scratch, otherwise I'd have
referenced gptboot.efi(8) from there.
Suggetions from: cress@, mhorne@
Reviewed by: rpokala@
Differential Revision: https://reviews.freebsd.org/D29591
This makes bi_load_efi_data cleaner to add common acpi setup code.
Reviewed by: imp, tsoome
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28936
Calculate font size from 16 density independent pixels (dp) by using:
size = 16 * ppi/160 * display_factor
We are specifying font size 16dp, and assuming 1dp = 160ppi.
Also apply scaling factor 2 (display_factor).
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28849
Check whether we have reached the end of the buffer using search_size
instead of MULTIBOOT_SEARCH, which is the maximum defined by the
specification, but the file can be shorter than that.
This prevents printing a harmless error message when loading a file
that is smaller than MULTIBOOT_SEARCH.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Fixes: adda2797eb ('stand/multiboot2: add support for booting a Xen dom0 in UEFI mode')
Add a missing space in one error message.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Fixes: adda2797eb ('stand/multiboot2: add support for booting a Xen dom0 in UEFI mode')
If we start with console set to comconsole, the local
console (vidconsole, efi) is never initialized and attempt to
use the data can render the loader hung.
Reported by: Kamigishi Rei
MFC after: 3 days
Do not attempt to add MODINFOMD_MODULEP to the kernel medatada on
arches that don't have it defined.
This fixes the build for arches different than amd64 after
7d3259775c.
Sponsored by: Citrix Systems R&D
Reported by: lwhsu, arichardson
Add some basic multiboot2 infrastructure to the EFI loader in order to
be capable of booting a FreeBSD/Xen dom0 when booted from UEFI.
Only a very limited subset of the multiboot2 protocol is implemented
in order to support enough to boot into Xen, the implementation
doesn't intend to be a full multiboot2 capable implementation.
Such multiboot2 functionality is hooked up into the amd64 EFI loader,
which is the only architecture that supports Xen dom0 on FreeBSD.
The options to boot a FreeBSD/Xen dom0 system are exactly the same as
on BIOS, and requires setting the xen_kernel and xen_cmdline options
in loader.conf.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28497
This mirrors the functionality of the BIOS amd64 bi_load function,
that stashes the absolute address of the module metadata. This is
required for booting as a Xen dom0 that does relocate the modulep and
the loaded modules, and thus requires adjusting the offset.
No functional change introduced, further patches will make use of this
functionality for Xen dom0 loading.
Sponsored by: Citrix Systems R&D
Reviewed by: imp
Differential revision: https://reviews.freebsd.org/D28496
Xen requires that UEFI BootServices are enabled in order to boot, so
introduce a new parameter to bi_load in order to select whether BS
should be exited.
No functional change introduced in this patch, as all current users of
bi_load request BS to be exited. Further changes will make use of this
functionality.
Note the memory map is still appended to the kernel metadata, even
when it could be modified by further calls to the Boot Services, as it
will be used to detect if the kernel has been booted from UEFI.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28495
Conout does contian the default output device name.
ConOutDev does contain all possible output device names, so we can
use it as fallback, when there is no ConOut.
PR: 253253
Even if it didn't behave well previously this is fixed.
Tested on: OrangePi One (armv7 u-boot) (serial only and serial + HDMI)
Tested on: Pine64-LTS (aarch64 u-boot) (serial only and serial + HDMI)
Tested on: Honeycomb (aarch64 EDK2) (serial only)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D28153
Some systems may provide multiple GOP instances and not all are
bound to hardware. The current loader is picking up the first GOP,
which may not be usable. Instead we load the GOP handle array,
and test every handle to have registered ConOut protocol. If ConOut is
present, we can use this GOP handle to open GOP protocol.
We do select font based on desired terminal size, we do query
UEFI terminal size with conout->QueryMode(), but by mistake, the fallback
values are used.
Pass gfx_state to efi_find_framebuffer(), so we can pick between
GOP and UGA in efi_find_framebuffer(), also we can then
set up struct gen_fb in gfx_state from efifb and isolate efi fb data
processing into framebuffer.c.
This change does allow us to clean up efi_cons_init() and reduce
BS->LocateProtocol() calls.
A little downside is that we now need to translate gen_fb back to
efifb in bootinfo.c (for passing to kernel), and we need to add few
-I options to CFLAGS.
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
buildworld already runs the stand build in parallel[1], so make it easier to
identify ordering issues by properly establishing dependencies or adding
.WAIT where needed.
Everything in stand/ relies on libsa, either directly or indirectly, because
libsa build is where the stand headers get installed and it gets linked in
most places.
Interpreters depend on their libs, machine dirs usually depend on top-level
libs that are getting built and at least one of the interpreter flavors.
For i386, order btx/libi386/libfirewire before everything else using a
big-ol-.WAIT hammer. btx is the most common dependency, but the others are
used sporadically. This seems to be where the race reporting on the mailing
list is- AFAICT, the following sequence is happening:
1.) One of the loaders gets built based on stale btx/btxldr
2.) btx/btxldr gets rebuilt
3.) installworld triggers loader rebuild because btx was rebuilt after
This seems like the most plausible explanation, as they've verified system
time and timestamps.
While we're here, let's switch stand/ over to a completely parallel build so
we can work out these kinds of issues in isolation rather than in the middle
of a larger build.
Reviewed by: bdragon, sjg, tsoome
Tested by: bdragon (-j1024, no failures, significant speed improvement)
Differential Revision: https://reviews.freebsd.org/D23411
Without this we risk having the .interp section be placed earlier in the
file and mess with section offsets; in particular it has been seen to be
placed at the start of the file and cause the PE/COFF header to not be
at address 0. This is the same fix as was done for arm64 in r365578.
Reviewed by: mhorne, imp
Approved by: mhorne, imp
Differential Revision: https://reviews.freebsd.org/D27603
i386 and the rest of supported architectures by defining KERNLOAD in the
vmparam.h and getting rid of magic constant in the linker script, which albeit
documented via comment but isn't programmatically accessible at a compile time.
Use KERNLOAD to eliminate another (matching) magic constant 100 lines down
inside unremarkable TU "copy.c" 3 levels deep in the EFI loader tree.
Reviewed by: markj
Approved by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27355
In some environments is difficult to access bootp/dhcp
configuration as "standard user". Add a command that allows to set
or display the URI of the network server used as "net:" device.
Currently only tftp and nfs protocols are supported.
Typical usage pattern is:
netserver tftp://192.168.168.1/path_to_obj_dir/arm.armv7/sys/GENERIC/
boot net:kernel
Reviewed by: imp, kevans
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D26736
On startup the arm64 efi loaders need to know PC-relative addresses.
Previously we used the adr instruction to find this address, however this
instruction is limited to +/- 1MiB.
Switch to adrp to find the 4k page the address is within and an add to
set the bottom 12 bits. This lets us address +/- 4GiB which should be
large enough for now.
Reported by: imp
MFC after: 2 weeks
Sponsored by: Innovate UK
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
This was causing build failures in CheriBSD where we were passing -pie
already by default.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D24787
The video on PCI heuristic was broken. It was supposed to infer a
video device when the last element of the path was a PCI DEVICE PATH
node. However, the last node in the device path is an END node, so
this heuristic never fired.
This leads, among other things, to bhyve only producing output in the
serial connection once we leave the boot loader. This restores the
dual headed boot on bhyve + UEFI (as we did in 11.2), but will favor
serial in the absence of other config which may be a change from 11.2.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26572
During devswitch probe, we pick boot pool based on boot disk, if the boot
disk happens to have multiple pools in freebsd-zfs partitions, the current
code does pick last pool from boot disk as boot pool. While there is no
way at that stage to test, the more logical approach would be to pick
first matching pool.
This patch is assuming we do pass pool guid pointer with guid value 0,
this will help us to determine, if the guid value is already set or not.
The general suggestion would be not to share disk between different pools.
Reported by: Alexander Leidinger
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
When building the loader an unneeded .interp section may be added. Move
this to the unused section region so offsets of used sections don't
change.
Obtained from: CheriBSD
Sponsored by: Innovate UK
A bug in the EFI HTTP driver of TianoCore EDK2 causes memory
corruption when an http instance that uses tls is reconfigured,
leading to a crash.
Work around this by forcing a new http instance for each request
instead of reconfiguring the existing one.
The upstream bug report is https://bugzilla.tianocore.org/show_bug.cgi?id=1917
Submitted by: bcran
Reviewed By: imp, kevans, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21281
The checkpoints are another way of keeping the state of ZFS.
During the rewind, the pool has to be exported.
This makes checkpoints unusable when using ZFS as root.
Add the option to rewind the ZFS checkpoint at the boot time.
If checkpoint exists, a new option for rewinding a checkpoint will appear in
the bootloader menu.
We fully support boot environments.
If the rewind option is selected, the boot loader will show a list of
boot environments that existed before the checkpoint.
Reviewed by: tsoome, allanjude, kevans (ok with high-level overview)
Differential Revision: https://reviews.freebsd.org/D24920
On RISC-V, Clang warns with:
cast to smaller integer type 'unsigned int' from 'void (*)(void *)'
Instead, use %p as the standard format specifier for printing pointers.
Whilst Arm's pointer size is the same as unsigned, it's still cleaner to
use the right thing there too.
Reviewed by: brooks (mentor), emaste
Approved by: brooks (mentor), emaste
Differential Revision: https://reviews.freebsd.org/D25718
