d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
57,134 Commits 4 Branches 49 Tags 2 GiB
003223c276
Commit Graph

715 Commits

Author SHA1 Message Date
Julian Elischer
e548a5c513 Allow the eiface node to be made as a module (not linked into build yet) 2001-02-25 06:18:22 +00:00
Julian Elischer
6de306ecee Add a Makefile for the sample node so It can be compiled. 
This helps to stop it from geting out of sync.
It is not part of the normal build but I can use it with all the others
when I make changes to netgraph to ensure it is buildable.
 2001-02-25 05:34:33 +00:00
Boris Popov
d8589bd5cb Introduce API for sequential reads/writes (build/dissect) of mbuf chains. 
Reviewed by:	Ian Dowse <iedowse@maths.tcd.ie>,
		Bosko Milekic <bmilekic@technokratis.com>,
		Julian Elischer <julian@elischer.org> and arch@/net@
Obtained from:	smbfs
 2001-02-24 15:44:30 +00:00
Julian Elischer
cdee49f986 Add a 'splitter' node to separate a bidirectional 
packet flow into two unidirectional flows.

Part of a suite of nodes developed for packet flow control.
More to follow as I have time to port them to 5.x or
as others do so. The ipfw node will be the hardest..

Submitted by:	"Vitaly V. Belekhov" <vitaly@riss-telecom.ru>
 2001-02-22 17:14:36 +00:00
Yoshihiro Takahashi
2eb8169a1a Fixed warnings. 2001-02-21 11:28:02 +00:00
Jonathan Lemon
da33b5e745 Hook up the linux module for alpha again. 
Approved by:	beast
 2001-02-20 02:19:01 +00:00
Matt Jacob
28b2e25674 Move linux to i386 only until it gets fixed for alpha (again). 2001-02-19 21:20:33 +00:00
Yoshihiro Takahashi
69115ebe90 Add pc98 support. 2001-02-10 12:52:56 +00:00
Yoshihiro Takahashi
2992e4e37f Added pc98 supports. 2001-02-08 13:24:30 +00:00
Semen Ustimenko
9526a692c6 Add QS6612, AC101 and LXT970 personal drivers and register definitions. 
Obtained from:	NetBSD/OpenBSD
 2001-02-07 19:57:40 +00:00
Cameron Grant
ab0ef99cfa add forgotten makefile 2001-02-05 01:16:12 +00:00
Cameron Grant
17e401f8a9 add driver for CS4281 sound chips 
Submitted by:   Orion Hodson <O.Hodson@cs.ucl.ac.uk>
 2001-02-04 19:23:35 +00:00
Cameron Grant
ebbb717721 add driver for CMedia CMI8338/CMI8738 sound chips 
Submitted by:   Orion Hodson <O.Hodson@cs.ucl.ac.uk>
 2001-02-04 19:13:40 +00:00
Warner Losh
1bd4d86275 Remove NAHA, NAHATOT and aha_softcs and related code. It was unused 
except for setting it.  Also remove count from aha and replace it with
optional.

Also add commented out pccard lines for all the old card drivers.
They have to be commented out until they are converted because it
causes problems in NEWCARD.
 2001-02-04 16:45:39 +00:00
Peter Wemm
173333f41c Remove some stray traces of KMODDEPS 2001-02-04 12:35:22 +00:00
Peter Wemm
481d7a5891 Zap obsolete (died with LKM) EXPORT_SYMS variable 2001-02-04 10:52:25 +00:00
Peter Wemm
205a48f7f3 Zap some bad examples: 
opt_foo.h:
	touch opt_foo.h
.. is unnecessary - kmod.mk does this for us.
 2001-02-04 08:23:14 +00:00
Scott Long
a5108eaebf Driver for the ESS Maestro3 and Allegro sound chips. Note that due to the 
amount of GPL'd firmware in the driver, it will only be built as a module.

Approved by:	cg
 2001-02-01 20:29:16 +00:00
Dag-Erling Smørgrav
fa20d78387 KLDify the "speaker" device (which calls itself atspeaker internally, and 
is i386-specific, so name the module atspeaker rather than speaker).
 2001-02-01 16:39:34 +00:00
Scott Long
ed2b5a2368 Update the module Makefile to reflect the state of things from the last 
acpi-ca import.

Approved by:	msmith
 2001-01-31 22:40:01 +00:00
John Hay
01b96fdf9e Make klds for the ar and sr devices and hook them up. 
The normal versions are called if_ar.ko and if_sr.ko and the netgraph
versions ng_sync_ar.ko and ng_sync_sr.ko.
 2001-01-30 10:20:43 +00:00
Peter Wemm
93cd41f72d Zap silly #if NPCI > 0 and the hoops that we jump through for the module 
case.  Use an 'and' case in conf/files so that it only gets compiled if
pci is present.
 2001-01-29 11:38:39 +00:00
Yoshihiro Takahashi
ba4c5e6950 Added necessary include for pc98. 2001-01-25 09:56:04 +00:00
Yoshihiro Takahashi
5069714534 Added PC-98 apm support. 
Submitted by:	MURAMATSU Atsushi <amura@ma3.seikyou.ne.jp>
 2001-01-22 11:27:25 +00:00
Peter Wemm
ba014c35dc Argh! add card_if.h to the generated list. This fixes kernel builds for 
those who haven't added 'NO_MODULES=off' to /etc/make.conf.
 2001-01-17 22:36:49 +00:00
Mark Murray
c202cd74f8 Clean up Makefile, and remove the last vestiges of NOBLOCKRANDOM. 2001-01-15 19:35:00 +00:00
Brian Feldman
7dd1f91a70 Evidently, svr4 is broken at the moment. Disconnect the build to prevent 
Bad Things from unsuspecting module loaders.
 2001-01-09 04:56:53 +00:00
Garrett Wollman
0a2c3d48c6 select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
Garrett Wollman
7f8c734f00 Note new location of wi driver source code. 2001-01-09 04:29:29 +00:00
Warner Losh
bdbd54e46d Add aic to the list of drivers that might work with NEWCARD. I've added 
the same config lines that NetBSD has.  This builds with both NEWCARD
and GENERIC config files.
 2001-01-08 01:59:15 +00:00
Peter Wemm
e4b36f7dd8 It is unlikely that we'll be supporting old-style ZMAGIC linux a.out 
binaries on anything but i386.. (ia64, sparc64, etc)  Invert the .if
so that it is inclusive of i386 platforms rather than excluding just
the alpha.
 2001-01-07 03:10:15 +00:00
David E. O'Brien
c68159a6d8 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
Jeroen Ruigrok van der Werven
cbfa684843 We don't use += for SRCS in Makefiles, we simply use the 
line continuation character and state the rest of the sourcefiles
on the next line.
 2001-01-06 09:44:30 +00:00
Jun Kuriyama
33dc87aa84 Fix typo. 
Pointed out by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
 2001-01-06 06:20:54 +00:00
Nicolas Souchu
c05aa33cb0 Add the VESA S3 linear framebuffer driver. It works on top of VESA by replacing 
the video switch by another. Exactly as VESA does on top of VGA.

It adds linear framebuffer to S3 VESA 1.2 cards.

Obtained from:	The original S3 ISA code comes from
                Peter Horton <pdh@colonel-panic.com>
 2001-01-05 16:53:10 +00:00
John Hay
121a47e264 Make sppp a kld. 2001-01-03 08:12:30 +00:00
Warner Losh
e2f9e1a37f add pcic_p to the list of things built 2001-01-02 21:40:41 +00:00
Poul-Henning Kamp
924836d50e Add a missing vnode_if.h. 
Submitted by:	Jim Bloom <bloom@acm.org>
 2001-01-01 11:28:32 +00:00
Paul Richards
2d1a798869 Change the module name from lnc to if_lnc so that ifconfig works. 2000-12-29 11:46:17 +00:00
Dag-Erling Smørgrav
dd488b6dd8 Retire kernfs (kernel part). 2000-12-28 12:17:35 +00:00
Cameron Grant
a906b37278 add sys/dev/sound/pcm/buffer.c, lefo out of last commit 2000-12-23 03:27:09 +00:00
David E. O'Brien
45c27b729e *sigh* The `pecoff' module was added to all arches w/out testing a compile 
on all arches.  This fixes the Alpha kernel build.
 2000-12-22 22:33:15 +00:00
Takanori Watanabe
d8c616aedc Add ACPI AC adaptor and ACPI Control Method Battery. 
And install notify handler for thermal zone .
 2000-12-22 14:41:55 +00:00
Takanori Watanabe
6ef9f30dfd Add pecoff directory. 
Submitted by:nyan
 2000-12-21 15:33:30 +00:00
Takanori Watanabe
bffb191efe Add PECOFF (WIN32 Execution file format) support. 
To use it, some dll is needed. And currently, the dll is only for NetBSD.
So one more kernel module is needed.
For more infomation,
http://chiharu.haun.org/peace/ .

Reviewed by:	bp
 2000-12-20 12:51:08 +00:00
Alexander Langer
a4563d080a Enable the sym module. 2000-12-19 12:54:17 +00:00
Alexander Langer
2422a9c63d Use the default value for MFILES 2000-12-19 12:27:53 +00:00
Brian Feldman
2ab4063613 Unbreak the modules after the last commit (newpcm kobjification). 2000-12-18 06:39:01 +00:00
Cameron Grant
0f55ac6c1a kobjify. 
this gives us several benefits, including:

* easier extensibility- new optional methods can be added to
  ac97/mixer/channel classes without having to fixup every driver.

* forward compatibility for drivers, provided no new mandatory methods are
  added.
 2000-12-18 01:36:41 +00:00
Yoshihiro Takahashi
f3474f630e PC-98 boxes use aic_cbus.c instead of aic_isa.c. 2000-12-16 04:00:40 +00:00