Certain MTA configurations mean that the notifications from
virecover keep bouncing; so here's a patch to allow administrators
to turn them off.
PR: conf/54910
Submitted by: bms (with a minor cleanup)
that the keys are currently generated by computing the MD5 checksum of 512
bytes read from /dev/random, and are passed to gbde on the command line.
Sponsored by: Teleplan AS
This commit also removes the support for the sysutils/jailer port. This
is inline with the general policy to keep ports related knobs out
of the base system's configuration mechanism.
Submitted by: Juergen Unger <j.unger@addict.de>
the throttling state in response to line transitions. Future plans
include adding support for CPU frequency changes.
Add a devd.conf entry for calling this script.
The default values for this are:
performance_cx_lowest="HIGH" # Use HLT (C0) online
performance_throttle_state="HIGH" # 100% (no throttling)
economy_cx_lowest="LOW" # Use the lowest Cx state possible
economy_throttle_state="HIGH" # 100% (no throttling)
systems are mounted. An example set of entries for /etc/rc.conf:
ataraid_enable="YES"
ataraid_devices="ar0"
ataraid_ar0_set="ad2 ad3"
ataraid_ar0_type="RAID1"
Because there is no "correct" way of doing ATA raid (ie, geom vs.
atacontrol vs. vinum) that is bikeshed proof, this rcng script stays within
the bounds of atacontrol and assumes that other RAID solutions for GEOM or
vinum will end up in a different rcNG script.
Reviewed by: green
time during the boot process. This is needed in the case where NFS mounts
from servers reachable only via IPSEC are in /etc/fstab.
PR: conf/42497
Submitted by: Volker Stolz
Approved by: re (rwatson)
A "driftfile" caches the oscillator offset estimate from boot to boot,
having this means faster and less bumpy time synchronization. Will
be overridden by any value in the config file.
o The following additional configuration attributes of a jail can be
controlled from rc.conf:
- mounting devfs(5)
- mounting fdescfs(5)
- mounting procfs(5)
- custom devfs(8) ruleset
If no ruleset is specified, the default jail ruleset is used.
o The output of executing /etc/rc in the jail is now redirected
to /dev/null. Instead, the hostname of the jail is echoed if
the jail(8) command exited successfully. If the output is wanted
it can probably be redirected to a file (/var/run/$jail maybe)
instead of /dev/null.
Submitted by: Scot W. Hetzel <hetzels@westbend.net>
with modifications by Jens Rehsack <rehsack@liwing.de>
and me.
the src/etc makefile. This list was used to manually
install the files from src/etc. Instead, simply change
directory and 'make install'.
o There is no reason for the files in src/etc/defaults to
be installed as writeable.
Reviewed by: ru
off by default.
o Apparently the routine displaying the informational messages wasn't
checking its knob in rc.conf, so fix that as well.
Requested by: obrien
devfs(8) rules in rc(8). It is most useful for applying
rules to devfs(5) mount points in /dev or inside jails.
The following line of script is sufficient to
mount a relatively useful+secure devfs(5) in a jail:
devfs_mount_jail /some/jail/dev
Some new shell routines available to scripts that source
rc.subr(5):
o devfs_link - Makes it a little easier to create symlinks
o devfs_init_rulesets - Create devfs(8) rulesets from devfs.rules
o devfs_set_ruleset - Set a ruleset to a devfs(5) mount
o devfs_apply_ruleset - Apply a ruleset to a devfs(5) mount
o devfs_domount - Mount devfs(5) and apply some ruleset
o devfs_mount_jail - Mount devfs(5) and apply a ruleset
appropriate to jails.
Additional rulesets can be specified in /etc/devfs.rules.
If the devfs_system_ruleset variable is defined in rc.conf
and it contains the name of a ruleset defined in /etc/defaults/devfs.rules
or user supplied rulesets in /etc/devfs.rules then that ruleset will
be applied to /dev at startup by the /etc/rc.d/devfs script. It can
also be applied post-startup:
/etc/rc.d/devfs start
This is a more flexible mechanism than the previous method of using
/etc/devfs.conf. However, that method is still available.
Note: since devfs(8) doesn't provide any way for creating symlinks
as part of a ruleset, anyone wishing to create symlinks in a devfs(5)
as part of the bootup sequence will still have to rely on /etc/devfs.conf.
use the atmconfig(8) utility instead of route(8) to install those routes.
For this we need a new rc.conf variable natm_static_routes that works
just like static_routes except that the referenced routes use the syntax
of atmconfig(8).
Okay'ed by: mtm
This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.
Approved by: jeff (mentor)
take advantage of the rc.subr(8) glue. They are renamed dhclient_program
and dhclient_flags.
o Rename them in rc.conf(5)
o Rename them in /etc/defaults/rc.conf
o Add the deprecated variables to /etc/rc.subr
o Isolate the use of the 'command' variable to the
NetBSD specific parts in /etc/rc.d/dhclient.
o Now that dhcp_flags has also been renamed it will
be applied properly by rc.subr(8) glue code.
Reported by: John Nielsen <john@jnielsen.net>
All functionality from the previous system has been preserved, and
users should still customize their system boot with the familiar
methods, rc.conf, rc.conf.local, rc.firewall, sysctl.conf, etc.
Users who have customized versions of scripts that have been removed
should take great care when upgrading, since the compatibility code
that used those old scripts has also been removed.
be). Using that string leads rc.network to execute:
# sysctl -w vfs.nfs.bufpackets=DEFAULT
vfs.nfs.bufpackets: 4 -> 0
Which isn't what was intended.
PR: conf/31280
MFC after: 3 days
named(8) daemon by providing a new rc.conf knob: named_pidfile
that defaults to the path specified in the system-installed named.conf(5).
Approved by: markm (mentor)
Reviewed by: dougb
Noticed by : Galen Sampson <galen_sampson@yahoo.com>
Dan Pelleg <daniel+bsd@pelleg.org>
PR: conf/46402
MFC: 2 weeks (with re@ approval)
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
where people want to have the cards configured. Lack of -z is a speed
optimization.
Submitted by: many voices on mobile@
Approved by: re@ (rwatson)
MFC after: 3 days
to specify rules definition file for ipfilter. The default is
/etc/ipf6.rules. If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.
Reviewed by: Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after: 1 week
PR: 38919
Submitted by: Tommy Johnson
o IBM IDE CDROM
PR: 39537
Submitted by: Kevin Van Maren
o T-Sunus 130 card
PR: 41802
Submitted by: Oliver Schneider
o No-name OEM Prism card
o ActionTec Prism card
o ZoomAir 11Mbps High Rate wireless networking
PR: 41929, 41928
Submitted by: Bruce M Simpson
o Dynalink L100C16
PR: 41938
Submitted by: Marco van de Voort
1) Add new card entry for nortel eMobility wi card (from email
that I've lost the sender on :-(
2) put ata devices at config 0x1 rather than auto. This should be
better for nearly all cases.
MFC after: 3 days
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable to mountd_enable.
We also include shims for all the old variable names.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
Submitted by: matt peterson
While I'm here, kill the flags 0x10000 on all the prism based cards.
Both stable and current figure this out on their own and we've had at
least one releases where this is the case.
card behind it (without the pcmcia form factor). This entry gets to
the point of attaching, but there's something wrong with the '29
support, so it doesn't quite work yet.
fix a comment that suggested setting ipv6_ipv4mapping to blank. This
will aid in merging with rcng which requires all veriables to be
explicitly set.
Submitted by: Mike Makonnen
MFC after: 1 week
The Blue Concentric CF 802.11b card is a compactflash form-factored card
that does 802.11b, including 128bit encryption.
The Zonet modem pccard is a simple FAX/Modem card.
Both are sold in Guang-Hua Market in Taipei, and functions perfectly
with -current and -stable.
Add /etc/rc.d to the startup dirs list. It is a convenient place to put
custom startup scripts instead of hacking a shared rc.local. eg: ftpd in
listener mode, or maybe even sendmail or another mailer, etc.
<peril sensitive sunglasses off>
clientmqueue (submit mail queue).
The new mailq display is only active if both the old
daily_status_mailq_enable is set to "YES" and the new
daily_status_include_submit_mailq is set to "YES" so people who disabled
440.status-mailq won't have any surprises.
Likewise, the new queue run is only active if both the old
daily_queuerun_enable is set to "YES" and the new daily_submit_queuerun
is set to "YES" so people who disabled 500.queuerun won't have any
surprises.
While I am here, remove the [ ! -d /var/spool/mqueue ] checks from
both scripts as the queue directory isn't always /var/spool/mqueue for
the main daemon -- it can be set to anything in the sendmail.cf file.
MFC after: 1 week
again."
As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail. The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed. A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA. For backward compatibility, it will default to
/etc/rc.sendmail. The specified script is called out of /etc/rc after
checking to make sure it exists. A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.
Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.
Reviewed by: -current, -stable, obrien, peter, ru
MFC after: 1 week
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'
Fix the documentation, rc.conf(5), to reflect this change.
Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.
MFC after: 3 days
at boot (sendmail_enable=NO), a localhost-only daemon may started
(sendmail_submit_enable) as it is needed to accept mail from command line
submissions. If this isn't desired, see etc/mail/README for more hints.
Optionally (sendmail_msp_queue_enable) start a queue runner for the
submission queue in case a daemon isn't available to accept command line
submitted mail at submission time.
Note that the syslog labels for all of these sendmail processes have been
uniquified for easier log parsing.
10 in -STABLE), pccardd's string comparison between
pccard.conf's entry and PC card's CIS tupple became strict
matching.
As influences of this commit, some PC cards don't work since
some /etc/default/pccard.conf's card identifiers entries are
incorrectly described.
- Lexar Media compact flash
- IO DATA CBIDE2 in 16 bit mode
- TOSHIBA Portable 24X Speed CD-ROM Drive PA2673UJ
- Hewlett Packard M820e (CD-writer)
Update these card configs.
PR: 33815
Obtained from: [bsd-nomads:16128]
# This card has the same PCMCIA and OEM id as ELSA XI300 wireless card, which
# appears to be listed elsewhere in this file.
Submitted by: Abe Toshiaki-san <ans@sun-tec.co.jp>
MFC After: 5 days
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).
PR: bin/32953
Reviewed by: -bugs discussion
MFC after: 1 week
We now do it as a "camcontrol rescan all" which is something ken
promised to implement; for the time being it's not worse than the old
"camcontrol rescan $device" which ended up in something like
"camcontrol rescan aic1". Currently, camcontrol misinterprets the
third non-numeric arg as number 0, and rescans bus 0, which is about
the best we could get at this time.
Approved by: imp
MFC after: 1 week
Submitted by: Michael Johansson <micke@nevermind.net>
o Sony PCWA-C100 WaveLAN card
Submitted by: "Jeremiah Gowdy" <jgowdy@home.com>
o Corega KK Wireless LAN PCCA-11 (version b?)
Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
types (networkfs_types) with a version that includes the original
list.
This increases the scope for user error and also means that systems with
networkfs_types set in /etc/rc.conf will not benefit from changes to the
list in /etc/defaults/rc.conf on upgrade.
Instead, store the default list in /etc/rc itself and allow the operator
to append to that list by specifying her own list in networkfs_types.
Rename networkfs_types to extra_netfs_types accordingly, as the new name
better describes the purpose of the variable. Default the value to
'NO'.
the network is initialized. This was first implemented in rev 1.268
of src/etc/rc, but was backed out at wollman's request.
The objection was that the right place for the fix is in mount(8).
Having looked at that problem, I find it hard to believe that
the hoops one would have to jump through can be justified by the
desire for purity alone.
Note that there are reported issues surrounding nfsclient kernel
support and mount_nfs(8), which currently make NFS an ugly exception
to the general case.
With this change, systems with non-NFS network filesystems configured
for mounting on startup in /etc/fstab are no longer guaranteed to
fail on startup.
o uncommnent joy stuff (me)
o Add BONDWELL B236 joystick card (me)
o Add Buffalo WLI-CF-S11G wi card (me)
o CNF CD-m (submitted by gda)
Submitted by: Dmitry A Goncharov <gda@sani.ru>
of /etc/daily. Some time later, /etc/daily became a set of periodic(8)
scripts. Now, this evolution continues, and /etc/security has been
broken into periodic(8) scripts to make local customization easier and
more maintainable.
Reviewed by: ru
Approved by: ru
dhclient and pccard_ether, introduce the concept of a "settle time" to
pccard_ether with the new pccard_ether_delay variable. Defaults to 5
seconds, which is enough time for the ed driver to finish its
autoconfiguration for newer Linksys based cards. This also can
eliminate the ed0: timeout messages that happen at startup as well.
MFC: after RE says OK.
appears to be another OEM version of the Netgear FA411. This is a
guess, since the original didn't include the flags, but this is too
similar to my netgear card...
Submitted by: neal@nelsonnet.org
discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include
it anyways (this is the same behaviour as with the make.conf.local
removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now,
since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to
match the new situation.
value, it forces GCC to not optimize above this level. For intance, GCC
made with "WANT_FORCE_OPTIMIZATION_DOWNGRADE=1" is a good setting for the
Alpha platform when building ports.
us anyway because it doesn't work right on the x86 and alpha. On
K&R code, small ints would be promoted to int. ANSI-C doesn't require
this and the small ints can be passed taking 8 or 16 bits of stack
space. However, the x86 abi that we use *does* promote to 32 bit,
and the alpha ABI passes them in 64 bit registers so we dont have
that aspect of the problem here. Losing float precision by having it
cast down to int because the funtion prototype specifies int is the
least of our problems. -Wmissing-prototypes helps here anyway.
building a .cf file from a .mc file.
Include -D_FFR_TLS_O_T to enable tls policy control since the sendmail binary
build enables that FFR as well.
PR: conf/28361
MFC after: 1 week
for separating the startup scripts' list into individual filenames.
Run the shutdown scripts in reverse alphabetical order, so dependent
services are stopped before the services they depend upon.
Reviewed by: -arch, -audit
MFC after: 3 weeks
the following description in RFC2461:
AdvSendAdvertisements
A flag indicating whether or not the router sends
periodic Router Advertisements and responds to
Router Solicitations.
Default: FALSE
Note that AdvSendAdvertisements MUST be FALSE by
default so that a node will not accidentally start
acting as a router unless it is explicitly
configured by system management to send Router
Advertisements.
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 1 week
Make the default setting YES for now to get some experience with it.
Note: If people starts seeing disk errors because of this then it
should not be backed.
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
Note that "right" in this case is not universally recognized, but
NTP-practittioners as opposed to theoretians generally agree that
getting "inside the window" using ntpdate is TRTTD on PC hardware.
PR: 25514
Submitted by: Chris Johnson <cjohnson-pr@palomine.net>
very specific scenarios, and now that we have had net.inet.tcp.blackhole for
quite some time there is really no reason to use it any more.
(second of three commits)
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
Xircom CreditCard Netwave cnw
Intel PRO/Wireless 2011 (PRISM II) wi
3COM 3CRWE737A (PRISM II) wi
Note: I've had some reports that the latter two cards work, but I've not
been able to get them to work for me.
enable all harvesting options by default since having them on for
devices not present doesn't hurt anything. Leave them on by default
since for the most part they are not producing noticable slowdown,
and are about to get a lot more efficient.
Re-order part of the cheesy entropy process in preparation for
its complete removal.
during the boot process. We're turning it on by default, based on the
actual presence of a configured ethernet card, and/or ppp/tun devices.
Of course, it's easy to disable in rc.conf.
and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and
'3dnow' MACHINE_CPU tags as appropriate. In the near future this will
be used to control various ports which have MMX/3dNow optimizations,
instead of the ad-hoc methods currently used.
Reviewed by: peter
