entire range where the page mapping request queue needs to be atomically
examined and modified.
Oddly, while this doesn't seem to affect the overall rate of panics
(running 'make index' on EC2 t1.micro instances, there are 0.6 +/- 0.1
panics per hour, both before and after this change), it eliminates
vm_fault from panic backtraces, leaving only backtraces going through
vmspace_fork.
When cleaning up a thread, reset its LDT to the default LDT.
Note: Casting the LDT pointer to an int and storing it in pc_currentldt is
wildly bogus, but is harmless since pc_currentldt is a write-only variable.
MFC after: 3 days
Use xen_update_descriptor to update the LDT rather than bcopy. Under Xen,
pages used for holding LDTs must be read-only, so we can't make the change
ourselves.
Ths obvious alternative of "remap the page read-write, make the change, then
map it read-only again" doesn't work since Xen won't allow an LDT page to be
remapped as R/W. An arguably better solution is used by NetBSD: They don't
modify LDTs in-place at all, but instead copy the entire LDT, modify the new
version, then atomically swap.
MFC after: 3 days
Synchronize reality with comment: The user_ldt_alloc function is supposed to
return with dt_lock held. Due to broken locking in i386/xen/pmap.c, we drop
dt_lock during the call to pmap_map_readonly and then pick it up again; this
can be removed once the Xen pmap locking is fixed.
MFC after: 3 days
Don't map physical to machine page numbers in pte_load_store, since it uses
PT_SET_VA (which takes a physical page number and converts it to a machine
page number).
MFC after: 3 days
Lock the vm page queue mutex around calls to pte_store. As with many other
uses of the vm page queue mutex in i386/xen/pmap.c, this is bogus and needs
to be replaced at some future date by a spin lock dedicated to protecting
the queue of pending xen page mapping hypervisor calls. (But for now, bogus
locking is better than a panic.)
MFC after: 3 days
The controller is commonly found on DM&P Vortex86 x86 SoC. The
driver supports all hardware features except flow control. The
flow control was intentionally disabled due to silicon bug.
DM&P Electronics, Inc. provided all necessary information including
sample board to write driver and answered many questions I had.
Many thanks for their support of FreeBSD.
H/W donated by: DM&P Electronics, Inc.
categories: Those which can't build with PAE because they attempt to cast
a pointer to a bus_addr_t (mostly scsi drivers); and those which can't be
built with XEN because they conflict with something in xen-os.h (e.g., in
cxgb there is a conflicting definition of test_and_clear_bit).
MFC after: 1 week
to PMAP_SET_VA; this fixes a mutex-not-held panic when a process
which called mlock(2) exits, and parallels a change made in
pmap_pte 10 months ago (svn r204160).
Note: The locking in this code is utterly broken. We should not
be using the VM page queue mutex to protect the queue of pending
Xen page mapping hypervisor calls. Even if it made sense to do
so, this commit and r204160 introduce LORs between the vm page
queue mutex and PMAP2mutex.
(However, a possible deadlock is better than a guaranteed panic,
and this change will hopefully make life easier for whoever fixes
the Xen pmap locking in the future.)
PR: kern/140313
MFC after: 3 days
the original amd64 and i386 headers with stubs.
Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.
Reviewed by: imp (previous version), jhb
Approved by: kib (mentor)
function always returned the nominal frequency instead of current frequency
because we use RDTSC instruction to calculate difference in CPU ticks, which
is supposedly constant for the case. Now we support cpu_get_nominal_mhz()
for the case, instead. Note it should be just enough for most usage cases
because cpu_est_clockrate() is often times abused to find maximum frequency
of the processor.
mark user FPU context initialized, if current context is user context.
It was reversed in r215865, by inadequate change of this code fragment
to a call to fpuuserinited()/npxuserinited().
The issue is only relevant for in-kernel users of FPU.
Reported by: Jan Henrik Sylvester <me janh de>, Mike Tancsa <mike sentex net>
Tested by: Mike Tancsa
MFC after: 3 days
timecounter period from 2^32 ns (~4.3s) to 2^41 ns (~36m39s). Some time
sharing systems can skip clock interrupts for a few seconds when under
load (e.g., if we've recently used more than our fair share of CPU and
someone else wants a burst of CPU) and we were losing time in quanta of
2^32 ns due to timecounter wrapping.
Increasing the timecounter period up to 2^41 ns is definitely overkill,
but we still have microsecond timecounter precision, and anyone using
paravirtualized hardware when they need submicrosecond timing is crazy.
lock from pmap_extract_and_hold(), it didn't take into account that
pmap_pte_quick() sometimes requires the page queues lock to be held.
This change reimplements pmap_extract_and_hold() such that it no
longer uses pmap_pte_quick(), and thus never requires the page queues
lock.
For consistency, adopt the same idiom as used by the new
implementation of pmap_extract_and_hold() in pmap_extract() and
pmap_mincore(). It also happens to make these functions shorter.
Fix a style error in pmap_pte().
Reviewed by: kib@
while on i386 we have MAX_BPAGES=512. Implement this difference via
'#ifdef __i386__'.
With this commit, the i386 and amd64 busdma_machdep.c files become
identical; they will soon be replaced by a single file under sys/x86.
end of segments be aligned, not just the start of segments) in order to
allow Xen's blkfront driver to operate correctly.
PR: kern/152818
MFC after: 3 days
Passing a count of zero on i386 and amd64 for [I386|AMD64]_BUS_SPACE_MEM
causes a crash/hang since the 'loop' instruction decrements the counter
before checking if it's zero.
PR: kern/80980
Discussed with: jhb
for CPU #0 weren't being properly reserved. Under VM pressure this would
cause problems when the dpcpu structures were overwritten by arbitrary
data; the most common symptom was a panic when netisr attempted to lock a
mutex.
For some reason the XEN code keeps track of the start of available memory
in the variables 'first', 'physfree', and 'init_first'; as far as I can
tell, we always have first == physfree == init_first * PAGE_SIZE. The
earlier commit adjusted 'first' (which, on !XEN, is the only variable
which tracks this value) but not the other two variables.
Exercise for reader: Eliminate two of these three variables.
functions, they are unused. Remove 'user' from npxgetuserregs()
etc. names.
For {npx,fpu}{get,set}regs(), always use pcb->pcb_user_save for FPU
context storage. This eliminates the need for ugly copying with
overwrite of the newly added and reserved fields in ucontext on i386
to satisfy alignment requirements for fpusave() and fpurstor().
pc98 version was copied from i386.
Suggested and reviewed by: bde
Tested by: pho (i386 and amd64)
MFC after: 1 week
updates were being queued by pmap_kremove, but the queue wasn't being
flushed; as a result, the updates didn't happen until *after* the call
to pmap_invalidate_range, and old entries could stick around in the TLB.
Adding a PT_UPDATES_FLUSH() call immediately before pmap_invalidate_range
ensures that after the invalidation the TLB will be repopulated with the
correct new entries.
Thanks to: kib, avg, alc
silently converts 'fld' to 'flds', without taking the actual variable
type into account (!), but clang's integrated assembler rightfully
complains about it.
Discussed with: cperciva
the TLB which don't correspond to ptes with PG_V set; prior to this commit
I'm sometimes getting the wrong data when pages are loaded into the buffer
cache (they're being loaded, but the missing TLB invalidation is causing
the wrong data to be visible).
_HYPERVISOR_multicall, and create a new HYPERVISOR_multicall function which
invokes _HYPERVISOR_multicall and checks that the individual hypercalls all
succeeded.
