Bump up MAX_HWCNT and MAX_EXCNT to 32 when ACPI is enabled. These are
the sizes of the hwregions and exregions arrays respectively. ACPI
firmware typically has more memory regions and the current value of
16 is not sufficient for some platforms.
This commit fixes a failure seen with AMI firmware on Cavium's Sabre
ThunderX2 reference platform. This platform needs 21 physical memory
regions and 18 excluded regions to boot correctly with the current
firmware release.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19073
It appears idling via 'wait' on e5500 causes strange behaviors, such as
top(1) simply hanging sporadically, until input. Until this can possibly be
sorted out (interrupt issue?), just don't idle on this hardware. The SoCs
are low power already, and the wait state doesn't save much anyway.
List is a 'read'-type operation that does not modify shared state; it's safe
for multiple thread to proceed concurrently. This is reflected in the vnode
operation LISTEXTATTR locking protocol specification, which only requires a
shared lock.
(Similar to previous r248933.)
Reported by: Case van Rij <case.vanrij AT isilon.com>
Reviewed by: kib, mjg
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19082
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
When libthr is statically linked into the binary, order of the
constructors execution is not deterministic. It is possible for the
application constructor to use pthread_mutex_* functions before the
libthr initialization was done.
Handle it by:
- making thr_malloc.c locking functions operational when curthread is not
yet set;
- making __thr_malloc_init() idempotent, allowing more than one call to it;
- unconditionally calling __thr_malloc_init() before initializing
a process-private mutex.
Reported and tested by: mmel
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
controller datasheet revision 3.3, in the context of Ethernet
MACs the control data describing the packet buffers typically
are named "descriptors". Each of these descriptors references
one buffer, multiple of which a packet can be composed of.
By contrast, in comments, messages and the names of structure
members, iflib(4) refers to DMA resources employed for RX and
TX buffers (rather than control data) as "desc(riptors)".
This odd naming convention of iflib(4) made reviewing r343085
and identifying wrong and missing bus_dmamap_sync(9) calls in
particular way harder than it already is. This convention may
also explain why the netmap(4) part of iflib(4) pairs the DMA
tags for control data with DMA maps of buffers and vice versa
in calls to bus_dma(9) functions.
Therefore, change iflib(4) to refer to buf(fers) when buffers
and not the usual understanding of descriptors is meant. This
change does not include corrections to the DMA resources used
in the netmap(4) parts. However, it revises error messages to
state which kind of allocation/creation failed. Specifically,
the "Unable to allocate tx_buffer (map) memory" copy & pasted
inappropriately on several occasions was replaced with proper
messages.
o Enhance some other error messages to indicate which half - RX
or TX - they apply to instead of using identical text in both
cases and generally canonicalize them.
o Correct the descriptions of iflib_{r,t}xsd_alloc() to reflect
reality; current code doesn't use {r,t}x_buffer structures.
o In iflib_queues_alloc():
- Remove redundant BUS_DMA_NOWAIT of iflib_dma_alloc() calls,
- change the M_WAITOK from malloc(9) calls into M_NOWAIT. The
return values are already checked, deferred DMA allocations
not being an option at this point, BUS_DMA_NOWAIT has to be
used anyway and prior malloc(9) calls in this function also
specify M_NOWAIT.
Reviewed by: shurd
Differential Revision: https://reviews.freebsd.org/D19067
ci.FreeBSD.org does not have access to a DNS resolver/network (unlike my test
VM), so in order for the test to pass on the host, it needs to avoid the DNS
lookup by using the numeric host address representation.
PR: 235200
Reviewed by: asomers, lwhsu
Approved by: emaste (mentor)
MFC after: 2 weeks
MFC with: r343362, r343365, r343367-r343368, r343461
Differential Revision: https://reviews.freebsd.org/D19026
Compiling a GENERIC kernel for i386 with clang 8.0 results in the
following warning:
/usr/src/sys/i386/i386/sys_machdep.c:542:40: error: 'sizeof ((ldt))' will return the size of the pointer, not the array itself [-Werror,-Wsizeof-pointer-div]
nldt = pldt != NULL ? pldt->ldt_len : nitems(ldt);
^~~~~~~~~~~
/usr/src/sys/sys/param.h:299:32: note: expanded from macro 'nitems'
#define nitems(x) (sizeof((x)) / sizeof((x)[0]))
~~~~~~~~~~~ ^
Indeed, 'ldt' is declared as 'union descriptor *', so nitems() is not
the right way to determine the number of LDTs. Instead, the NLDT define
from sys/x86/include/segments.h should be used.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19074
Currently, the trap code switches to the the temporary stack in the dbtrap
section. It works in most cases, but in the beginning of the execution, the
temp stack is being used, as starting in the powerpc_init() code.
In this current scenario, the stack is being overwritten, which causes the
return of breakpoint() to take abnormal execution.
This current patchset create a small stack to use by the dbtrap: codepath
avoiding the corruption of the temporary stack.
PR: 224872
Submitted by: breno.leitao_gmail.com
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D14484
With r319610, sesutil started twiddling the bits of every SES device.
Not everything is a disk slot, there are also fan controllers, temperature
sensors, even power supplies, among other things controlled by SES.
Add a type check to make sure we are only operating on device slot and array
device slot elements. Other type elements will be skipped, but it would be
simple to add additional cases for controlling the ident LEDs of other
element types (which are not necessarily the same bits).
Rather than doing raw bit manipulation of an unstructured byte array using
unnamed numeric constants, leverage existing code abstractions.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D19052
Otherwise the lock might recurse in faultin() if the process is
swapped out.
Reported by: zeising
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On CPUs supporting cmpxchg8b, fetch is performed by cmpxchg8b on
corresponding CPU slot, which unconditionally write to the slot. If
for that slot, the owner CPU increments it, then both CPUs might run
the cmpxchg8b instruction concurrently and this might race and
override the incremental write. So the counter update would be lost.
Fix it by implementing fetch as IPI and accumulation of result. It is
acceptable for rare counter64 fetch operation to be more expensive.
Diagnosed and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is a step towards being able to free pages without the page
lock held. The approach is simply to add an implementation of
vm_page_dequeue_deferred() which does not assert that the page
lock is held. Formally, the page lock is required to set
PGA_DEQUEUE, but in the case of vm_page_free_prep() we get the
same mutual exclusion for free by virtue of the fact that no
other references to the page may exist.
No functional change intended.
Reviewed by: kib (previous version)
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19065
To detect the case where the page is already marked for a deferred
dequeue, we must read the "queue" and "aflags" fields in a
precise order. Otherwise, a race with a concurrent
vm_page_dequeue_complete() could leave the page with PGA_DEQUEUE
set despite it already having been dequeued. Fix the problem by
using vm_page_queue() to check the queue state, which correctly
handles the race.
Reviewed by: kib
Tested by: pho
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19039
This allows userspace to trace the kernel using the coverage sanitizer
found in clang. It will also allow other coverage tools to be built as
modules and attach into the same framework.
Sponsored by: DARPA, AFRL
never get here, however a test for SOLARIS, as redundant as this test is,
serves to document that this is the illumos definition. This should help
those who come after me to follow the code more easily.
MFC after: 1 month
build directory, especially those for other operating systems.
The kernel module shims for other operating systems are hereby removed.
The kernel module shim for FreeBSD, mlfk_ipl.c, is already in
sys/contrib/ipfilter/netinet. The one here is never used and should
not be in the userland build directory either.
mlfk_rule.c isn't used either however we will keep it in case someone
wishes to use this shim to load rules via a kernel module, handy for
embedded. In that case it should be copied to
sys/contrib/ipfilter/netinet and a Makefile created to employ it.
(Probably a useful documentation project when time permits.)
MFC after: 1 month
Remove #ifdefs for ancient and irrelevant operating systems from
ipfilter.
When ipfilter was written the UNIX and UNIX-like systems in use
were diverse and plentiful. IRIX, Tru64 (OSF/1) don't exist any
more. OpenBSD removed ipfilter shortly after the first time the
ipfilter license terms changed in the early 2000's. ipfilter on AIX,
HP/UX, and Linux never really caught on. Removal of code for operating
systems that ipfilter will never run on again will simplify the code
making it easier to fix bugs, complete partially implemented features,
and extend ipfilter.
Unsupported previous version FreeBSD code and some older NetBSD code
has also been removed.
What remains is supported FreeBSD, NetBSD, and illumos. FreeBSD and
NetBSD have collaborated exchanging patches, while illumos has expressed
willingness to have their ipfilter updated to 5.1.2, provided their
zone-specific updates to their ipfilter are merged (which are of interest
to FreeBSD to allow control of ipfilters in jails from the global zone).
Reviewed by: glebius@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19006
That should shorten 'ifconfig <wlan> list txparam' output since
unsupported modes will not be shown.
Checked with RTL8188EE, STA mode.
MFC after: 2 weeks
For 11n / 11ac we are still using non-11n rates for management and
multicast traffic by default; check 'MCS rate' bit to determine how
to print them correctly.
PR: 161035
MFC after: 1 week
Do not try to clear 'basic rate' bit from roamRate; it cannot be here and,
actually, this operation clears 'MCS rate' bit instead, breaking comparison
for 11n / 11ac modes.
Tested with RTL8188CUS, HOSTAP mode + RTL8821AU, STA mode.
MFC after: 3 days
ifconfig(8) prints per-mode parameters if they are non-zero; since
we have 13 possible modes with 3...5 typically supported this change
should greatly reduce amount of information for 'ifconfig <wlan> list roam'
command.
While here ensure that sta_roam_check() will not use roaming parameters
for unsupported modes (it should not).
This change effectively reverts r188776.
MFC after: 2 weeks
Add SYNC_KLOOP_MODE option, and add support for direct mode, where application
executes the TXSYNC and RXSYNC in the context of the ioeventfd wake up callback.
MFC after: 5 days
When in MSI mode, the device was only being configured with one
interrupt index, but it needs two - one for the actual interrupt and
one to park the tx queue at.
Also clarified comments relating to interrupt index assignment.
Reported by: Yuri Pankov <yuripv@yuripv.net>
MFC after: 1 day
The XIVE (External Interrupt Virtualization Engine) is a new interrupt
controller present in IBM's POWER9 processor. It's a very powerful,
very complex device using queues and shared memory to improve interrupt
dispatch performance in a virtualized environment.
This yields a ~10% performance improvment over the XICS emulation mode,
measured in both buildworld, and 'dd' from nvme to /dev/null.
Currently, this only supports native access.
MFC after: 1 month
