Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
When using -l option targeting file that can't be opened (ie. nmdm module
is not loaded and /dev/nmdm* is specified) bhyve tries to apply capsicum
capabilities to a file that was not opened.
Enclose that code in an if statement and only run it on correctly opened
descriptor also providing meaningful message in case of an error.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Reviewed by: grehan, emaste
Sponsoied by: Mysterious Code Ltd.
Differential Revision: D12985
Gcc noticed that the result of the bit shift is always zero. Shift so
that the ATC_CS_C67 bits end up in bits 6 & 7.
Reviewed by: grehan, tychon
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11775
Gcc complained that e82545_tx_thread has a return type declared but
doesn't return anything. Annotate the procedure with _Noreturn.
Reviewed by: grehan
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11774
pthread_join(3). The variable tid is not yet initialized in case
the authentication fails at early stage, that would lead pthread_join be
called with an uninitialized variable.
CID: 1375950
Reported by: Coverity, cem
Reviewed by: cem
MFC after: 3 weeks.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D11150
Also add __FBSDID.
Reviewed by: grehan
This file lacks a license(!) so for this change the following declaration
applies:
To the greatest extent permitted by, but not in contravention of,
applicable law, Affirmer hereby overtly, fully, permanently, irrevocably
and unconditionally waives, abandons, and surrenders all of Affirmer's
Copyright and Related Rights and associated claims and causes of action,
whether now known or unknown (including existing as well as future claims
and causes of action).
not on wildcard. [1]
- Move the default port assignment from pci_fbuf.c to rfb.c,
to avoid polluting pci_fbuf.c with network things.
Suggested by: grehan
There is no behavioral difference, as it's just swapping
out the name of two identically-valued constants.
Submitted by: Vicki Pfau (vi AT endrift.com)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9597
This prevented the device from attaching with a
Windows guest (most other guests use the device type
for matching)
PR: 212711
Submitted by: jbeich
MFC after: 3 days
in the first byte of the 3-byte mouse data report.
Plan9/9front requires this.
Switch over to using #defines for the data report bits.
Verified no regression on Win10/Fedora-live.
Reported and tested by: Trent Thompson (trentnthompson at gmail com)
MFC after: 1 week
The TCP server implementation in dbgport does not track clients, so it
may try to write to a disconected socket resulting in SIGPIPE.
Avoid that by setting SO_NOSIGPIPE socket option.
Because dbgport emulates an I/O port to guest, the communication is done
byte by byte. Reduce latency of the TCP/IP transfers by using
TCP_NODELAY option. In my tests that change improves performance of
kgdb commands with lots of output (e.g. info threads) by two orders of
magnitude.
A general note. Since we have a uart emulation in bhyve, that can be
used for the console and gdb access to guests. So, bvmconsole and bvmdebug
could be de-orbited now. But there are many existing deployments that
still dependend on those.
Discussed with: julian, jhb
MFC after: 2 weeks
Sponsored by: Panzura
writev() can do a short write. Retrying it results in a very convoluted
and complex code, so we iterate over iovec and do regular stream_write()
instead.
Approved by: trasz
Sponsored by: iXsystems, Inc.
These functions are allowed to overwrite their input. Pull a copy of the
input parameter and call dirname() and basename() on that instead. Do
ensure that we reload the pathname value between calls.
Adds virtio-console device support to bhyve, allowing to create
bidirectional character streams between host and guest.
Syntax:
-s <slotnum>,virtio-console,port1=/path/to/port1.sock,anotherport=...
Maximum of 16 ports per device can be created. Every port is named
and corresponds to an Unix domain socket created by bhyve. bhyve
accepts at most one connection per port at a time.
Limitations:
- due to lack of destructors of in bhyve, sockets on the filesystem
must be cleaned up manually after bhyve exits
- there's no way to use "console port" feature, nor the console port
resize as of now
- emergency write is advertised, but no-op as of now
Approved by: trasz
MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.
Differential Revision: D7185
"io" is the default, and allows VGA i/o registers to be
accessed. This is required by Win7/2k8 graphics guests that
use a combination of BIOS int10 and UEFI.
"off" disables all VGA i/o and mem accesses.
"on" is not yet hooked up, but will enable full VGA rendering.
OpenBSD/UEFI >= 5.9 graphics guests can be booted using "vga=off"
- Allow "rfb" to be used instead of "tcp" for the fbuf VNC
description. "tcp" will be removed at a future point and is
kept as an alias.
Discussed with: Leon Dang
MFC after: 3 days
injected without state being set up.
This fixes a core dump when dropping to the UEFI prompt
with graphics enabled and moving the mouse around.
Discussed with: Leon Dang
MFC after: 3 days
There seems no hard limit on number of segments per packet in the chip,
and 20 appeared insufficient. Hope 64 will be enough, but if not -- add
check to report that and drop the packet instead of corrupting stack.
This makes factual interrupt routing match one shipped with UEFI firmware.
With old firmware this make legacy interrupts work reliable for functions 0
of PCI slots 3-6. Updated UEFI image fixes problem completely.
The code was successfully tested with FreeBSD, Linux, Solaris and Windows
guests. This interface is predictably slower (about 2x) then virtio-net,
but it is very helpful for guests not supporting virtio-net by default.
Thanks to Jeremiah Lott and Peter Grehan for doing original heavy lifting.
It was useless before, but may improve performance now if multiple devices
are configured and guest supports this feature.
Sponsored by: iXsystems, Inc.
While old syntax is still supported, new syntax looks like this:
-s 3,ahci,hd:/dev/zvol/XXX,hd:/dev/zvol/YYY,cd:/storage/ZZZ.iso
Sponsored by: iXsystems, Inc.
Add `WRAPPED_CTASSERT` macro by annotating CTASSERTs with __unused
to deal with -Wunused-local-typedefs warnings from gcc 4.8+.
All other compilers (clang, etc) use CTASSERT as-is. A more generic
solution for this issue will be proposed after ^/stable/11 is forked.
Consolidate all CTASSERTs under one block instead of inlining them in
functions.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
Put cfl/prdt under AHCI_DEBUG #defines as they are only used in
those cases.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
this on the branch.
Original commit message:
Initial bhyve native graphics support.
This adds emulations for a raw framebuffer device, PS2 keyboard/mouse,
XHCI USB controller and a USB tablet.
A simple VNC server is provided for keyboard/mouse input, and graphics
output.
A VGA emulation is included, but is currently disconnected until an
additional bhyve change to block out VGA memory is committed.
Credits:
- raw framebuffer, VNC server, XHCI controller, USB bus/device emulation
and UEFI f/w support by Leon Dang
- VGA, console/g, initial VNC server by tychon@
- PS2 keyboard/mouse jointly done by tychon@ and Leon Dang
- hypervisor framebuffer mem support by neel@
Tested by: Michael Dexter, in a number of revisions of this code.
With the appropriate UEFI image, FreeBSD, Windows and Linux guests can
installed and run in graphics mode using the UEFI/GOP framebuffer.
Approved by: re (gjb)
A couple of minor memory size option related nits:
- use common name 'memsize' (instead of 'max-size' or just 'size')
- bhyve: update usage with memsize unit suffix, drop legacy "MB"
unit
- bhyveload: update usage with memsize unit suffix
- bhyve(8): document default size
- bhyveload(8): use memsize formatting like it's done
in bhyve(8)
Reviewed by: wblock, grehan
Approved by: re (kib), wblock, grehan
Differential Revision: https://reviews.freebsd.org/D6952
When bhyve cannot open a backing file, it now says explicitly which file
could not be opened
Note that the change has only be maed in block_if.c and not in
pci_virtio_block.c as the error will always be catched by the first
PR: 202321 (different patch)
Reviewed by: grehan
MFC after: 3 day
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D6576
Previously, many errors (such as the PCI device not being attached
to the ppt(4) driver) resulted in bhyve silently exiting without
starting the virtual machine. Now any errors encountered when
configuring a virtual slot for a PCI passthru device should be noted
on stderr.
Reviewed by: neel
Differential Revision: https://reviews.freebsd.org/D5990
If the PBA shares a page with the MSI-X table, map the shared page via
/dev/mem and emulate accesses to the portion of the PBA in the shared
page by accessing the mapped page.
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5919
ncq was not being inititialized properly but it was not actually
necessary either, so make the code smaller by removing it.
CID: 1248842
Reviewed by: grehan
The buffer length should be checked to avoid overflow, but there
is no API to get the slot length, so the hardcoded value is used.
Return the currently-first request chain back to the available
queue if there are no more packets.
Report the link as up if we managed to open vale port.
Use consistent coding style.
Submitted by: btw
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5595
if vm_activate_cpu(..) fails when called from fbsdrun_addcpu(..)
MFC after: 1 week
PR: 203884
Reviewed by: grehan
Submitted by: William Orr <will@worrbase.com>
- Don't advertize trusted-computing capability in the Identify page.
This prevents Windows from issuing a TRUSTED_RECEIVE_DMA command.
- Windows will send down SMART and SECURITY_FREEZE_LOCK
even though smart and security capabilities were not advertized.
Send back a silent abort.
Reviewed by: mav
to the qemu one, and uses the same i/o ports but with different
messaging. Requires the 'bootrom' option to be enabled.
This is used by UEFI (and potentially other BIOSs/firmware) to
request information from bhyve. Currently, only the number of
vCPUs is made available, with more to follow.
A very large thankyou to Ben Perrault who helped out testing
an earlier version of this, and bhyve/Windows in general.
Reviewed by: tychon
Discussed with: neel
Sponsored by: Nahanni Systems
the largest that the Windows virtio driver can send down
- Always advertize indirect descriptors. The Illumos virtio
driver won't attach unless this capability is seen.
Reviewed by: neel
