These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
This is useful for debugging compat modules.
Sponsored by: EMC / Isilon Storage Division
Obtained from: Isilon OneFS (based on work by Jeff Hughes)
MFC after: 2 weeks
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
well over 8 years...
roll the clock forward 16 years since there have been other changes
deserving of a bump, but never happened..
Submitted by: feld
Obtained from: 1 week
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
- Retire long time unused (basically always unused) sys__umtx_lock()
and sys__umtx_unlock() syscalls
- struct umtx and their supporting definitions
- UMUTEX_ERROR_CHECK flag
- Retire UMTX_OP_LOCK/UMTX_OP_UNLOCK from _umtx_op() syscall
__FreeBSD_version is not bumped yet because it is expected that further
breakages to the umtx interface will follow up in the next days.
However there will be a final bump when necessary.
Sponsored by: EMC / Isilon storage division
Reviewed by: jhb
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
copied to userspace. Failing to do this would result in entries at the bottom
of the ktrdump output to be more recent than entries at the top.
With this change the timestamps are monotonically decreasing going from the
top to the bottom of the ktrdump output.
KTR buffer.
This happens when 'i' tries to wrap around from 0 to 'entries - 1'. Since 'i'
is a signed integer the modulo operation actually returns a negative number.
Fix this by computing the next index to use "by hand" instead of relying
on the modulo operator.
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.
Discussed with: melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
In certain situations when creating an authorized_key file on a Linux machine
restorecon(1) may need to be called. Therefore, attempt to run it if it exists.
MFC After: 1 week
Idea from: https://bugzilla.redhat.com/show_bug.cgi?id=739989
To help avoid confusion: when attempting to send a key file check to see if a
file of the same name exists with a '.pub' suffix and send that instead. This
mimics the behavior of other ssh-copy-id scripts.
Add -v passthrough.
Reported by: dweimer <dweimer@dweimer.net>
Reported by: feld
MFC After: 1 week
Highlights include (upstream revs in parens):
- Improvements to the remote GDB protocol client
(r196610, r197579, r197857, r200072, and others)
- Bug fixes for big-endian targets
(r196808)
- Initial support for libdispatch (GCD) queues in the debuggee
(r197190)
- Add "step-avoid-libraries" setting
(r199943)
- IO subsystem improvements (including initial work on a curses gui)
(r200263)
- Support hardware watchpoints on FreeBSD
(r201706)
- Improved unwinding through hand-written assembly functions
(r201839)
- Handle DW_TAG_unspecified_parameters for variadic functions
(r202061)
- Fix Ctrl+C interrupting a running inferior process
(r202086, r202154)
- Various bug fixes for memory leaks, LLDB segfaults, the C++ demangler,
ELF core files, DWARF debug info, and others.
Sponsored by: DARPA, AFRL
is no iSER support in ctld and/or kernel; should the user make that mistake,
the output from "iscsictl -L" is enough to determine what the problem is.
Sponsored by: The FreeBSD Foundation
