using the somewhat more hackish variant on extattr_get_*() to retrieve
the attribute list on an object.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
'use entire disk'. Neither for ia64 while I'm here - it needs a MBR if
its going to use fdisk+disklabel. The ia64 case is mostly academic though
because you'd be creating two partitions (dos + freebsd) rather than
a single freebsd-only partition.
either COMMENT or DESCR from the command line. When a port is
installed, one gets both +COMMENT and +DESCR files with a trailing
'\n' character. However, +COMMENT does not contain a trailing '\n'
when it is installed from a package due to this behavior of pkg_create.
Therefore, make sure it behaves exactly the same regardless of
where got its information; either command line or files. The modified
functions are used by pkg_create.
PR: 52097
Reviewed by: bento, kris,
portmgr, re,
Michael Nottebrock <michaelnottebrock@gmx.net>,
Martin Horcicka <horcicka@FreeBSD.cz>
Approved by: re (scottl)
MFC after: 1 week
error) on amd64 when doing pointer subtraction. This bug is already
fixed in gcc-3.3 (waiting for after the branch), and the hack will be
backed out at the first opportunity. This is in the ipv6 code path.
Approved by: re (scottl)
server, map it to EAGAIN locally rather than EACCES. The NLM spec
indicates the DENIED corresponds to lock contention, not a permission
failure. This fixes O_EXLOCK/O_SHLOCK with O_NONBLOCK, which would
previously give a permission error, which in turn fixes things
like mailq(8) and lockf(1) over NFS.
Approved by: scottl (re)
Reviewed by: truckman, Andrew P Lentvorski, Jr. <bsder@allcaps.org>
Idea from: truckman
has requested the lock in a non-blocking form, instead returning an
immediate failure. This appears to help reduce one of my "locks get
lost" symptoms involving lockf(1), which attempts a non-blocking lock
attempt before actually blocking on the lock. At this point the client
still gets back EACCES, which is an issue we're still working.
Approved by: re (scottl)
Submitted by: Andrew P. Lentvorski, Jr. <bsder@allcaps.org>
from the NFS server, following contention on a lock by this or another
client, immediately notify the waiting process that the lock has been
granted via a wakeup. Without this change, the client rpc.lockd will
not wakeup the waiting process until it next re-polls the lock (sometime
in the next ten seconds), which can lead to marked latency across all
potential lockers, as the lock is held by the client for the duration.
Approved by: re (scottl)
Submitted by: truckman
Reviewed by: Andrew P. Lentvorski, Jr <bsder@allcaps.org>
has been fixed to not need the missing files.
The firmware files themselves still now need to be fetched from the internet.
The README there gives the location.
Approved by: re@ (part of bluetooth upgrade)
rotated and then compressed with bzip2 instead of gzip. Otherwise,
any file which had a time-interval specified for 'when' and also
specified the 'J' flag would be rotated every time newsyslog was run.
(this is a quick-fix, trying to beat the code-freeze for 5.1-release)
PR: bin/51519
MFC after: 1 week
1. Hostnames were not treated case insensitively in all cases.
2. The method for stripping hostnames when reading the syslog.conf
differed from that when finding the hostname of an incoming request.
This lead to a broken match check. In my case, it meant I had to
have '@scooter.smi.example.com.example.com' to have 'logger.example.com'
properly save messages from 'scooter.smi.sendmail.com'.
3. Add paranoia to cfline() such that it doesn't try to access memory
outside of the bounds of the f_host string.
4. While I am here, get rid of an outdated comment, argv[{0,1,2}] are now
checked for NULL after the strdup() calls.
Reviewed by: dwmalone
MFC after: 1 week
* Add a paragraph suggesting that the merge option be used only for
files that users have modified. People have been using this option
for all files that are different, causing unecessary confusion.
The idea for this option came from Marc Schneiders <marc@schneiders.org>
* I've been meaning to remove the code that checked for the existence of
/etc/sysconfig for a while now, since that file was last seen in 2.2.2.
* Replace the above with a check for elements of the old rc system.
Offer to move these files out of DESTDIR/etc for the user's convenience.
* AcpiOsDerivePciId(): finds a bus number, given the slot/func and the
acpi parse tree.
* AcpiOsPredefinedOverride(): use the sysctl hw.acpi.os_name to
override the value for _OS.
Ideas from: takawata, jhb
Reviewed by: takawata, marcel
Tested on: i386, ia64
do not add the "\xFF" "VERSION" key --- it should only be added once
ALL entries have been updated.
While I'm here, correct the logic that detects whether or not the
user-ID has changed so that it works even if all entries have not
yet been updated to the new format.
Users missing-in-action were
Reported by: tjr, Vallo Kallaste <vallo@estcard.ee>,
leafy <leafy@leafy.idv.tw>
Sponsored by: DARPA, Network Associates Laboratories
config file. If the -C option is specified once, then newsyslog will create
any entries which specify the 'C' option. If -C is given twice, then
newsyslog will create all missing log files. Some of this code comes
from NetBSD, although this implementation does not exactly match theirs.
Reviewed by: freebsd-arch
MFC after: 10 days
on valid superblocks instead of issuing the error "not a BSD filesystem".
fs_sblockloc is a byte offset, not a fragment number. This change makes
quot work properly on UFS2 filesystems, which is important now that UFS2
is the default.
the 'N' flag. These were coded in March as revisions 1.55 and 1.56
of newsyslog.c. I intend to MFC all the matching changes next week.
This also reorganizes the description of the 'flags' field to give
list of the valid flags, instead of a long paragraph explaining
each of the possible values.
Obtained from: NetBSD (in spirit at least, for -s and N)
MFC after: 1 week
OBJS list. This is needed to crunch any program that relies on the
correct .CURDIR setting, e.g. src/bin/csh.
Submitted by: Tim Kientzle <kientzle@acm.org>
PC98 boot blocks don't support UFS2. We keep newfs(8) defaulting to
UFS2.
Warn users that FreeBSD can only boot from a root file system smaller
than 1.5TB; hopefully this will get fixed by the patches currently
floating around on -CURRENT.
Reviewed by: nyan
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.
Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
FreeBSD 5.1-RELEASE and later:
- newfs(8) will now create UFS2 file systems unless UFS1 is specifically
requested (-O1). To do this, I just twiddled the Oflag default.
- sysinstall(8) will now select UFS2 as the default layout for new
file systems unless specifically requested (use '1' and '2' to change
the file system layout in the disk labeler). To do this, I inverted
the ufs2 flag into a ufs1 flag, since ufs2 is now the default and
ufs1 is the edge case. There's a slight semantic change in the
key behavior: '2' no longer toggles, it changes the selection to UFS2.
This is very similar to a patch David O'Brien sent me at one point, and
that I couldn't find.
Approved by: re (telecon)
Reviewed by: mckusick, phk, bmah
at least one consumer outside of libc and pwd_mkdb.
Adjust the versioning in libc and pwd_mkdb accordingly.
named was the application affected, and that fact was first
Reported by: Zherdev Anatoly <tolyar@mx.ru>
Sponsored by: DARPA, Network Associates Laboratories
family of functions using the new nsdispatch(3) core. Remove
arbitrary size limits when using the thread-safe versions.
= Re-implement the traditional getpwent(3)/getgrent(3) functions on
top of the thread-safe versions.
= Update the on-disk format of the hashed version of the passwd(5)
databases to allow for versioned entries. The legacy version is
`3'. (Don't ask.)
= Add support for version `4' entries in the passwd(5) database.
Entries in this format are identical to version 3 entries except
that all integers are stored as 32-bit integers in network byte
order (big endian).
= pwd_mkdb is updated to generate both version 3 and version 4
entries.
Sponsored by: DARPA, Network Associates Laboratories
register a list of other packages with which they conflict (via the
-C option to pkg_create), and they will refuse to install (unless -f is
specified) if one of the listed packages is already present.
* Update documentation for the new feature as well as fleshing out some
existing documentation.
* Bump PKG_INSTALL_VERSION so this feature can be tested for.
Submitted by: Sergey Matveychuk <sem@ciam.ru>
PR: bin/47145
MFC after: 2 weeks
Many internal structure changes for the FireWire driver.
- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE.
- AR buffer handling.
Don't reallocate AR buffer but just recycle it.
Don't malloc and copy per packet in fwohci_arcv().
Pass packet to fw_rcv() using iovec.
Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode. We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
not cycle master capable but set myself for root node.
We should be the root node after next bus reset.
Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling
Tested on: i386, sparc64 and i386 with forced bounce buffer
LDADD is not wrong, but the simple substitution in `make checkdpadd'
doesn't work if foo.a is not an installed library, so we use the full
path to foo.a in both DPADD and LDADD for non-installed libraries.
o Add jexec(8) to execute a command in an existing jail.
o Add -j option for killall(1) to kill all processes in a specified
jail.
o Add -i option to jail(8) to output jail ID of newly created jail.
Echo-Request and Echo-Reply packets may only be sent in the LCP
Opened state. Echo-Request and Echo-Reply packets received in any
state other than the LCP Opened state SHOULD be silently discarded.
PR: 45760
Submitted by: Eugene Grosbein
MFC after: 2 weeks
applying corrupt deltas, but has never (to my knowledge) caught any sort
of corruption, but instead has caused failures on correct deltas several
times. I don't see any way to make the check useful, so it's gone.
Submitted by: Stephen Montgomery-Smith <stephen@math.missouri.edu>
PR: 50461
MFC after: 7 days
the moment, with the deprecated flags.
o Better error reporting on getting values from the driver. When we can't
get one for the default dumpinfo output. The old driver would succeed
for invalid RIDs, while the new driver reports errors. Since the info
we're getting from the card/driver doesn't exist for all cards, we just
don't report them. Improve error reporting elsewhere now that wi_getval
doesn't exit. Also fix a file descriptor leak as a side effect.
Reported by: scottl
if matchinstalled() found no packages, which happens to be the
case after fresh installations.
- Instead of using strstr(3) to match the package name, depend on
matchinstalled()'s MATCH_REGEX package matching.
PR: bin/50384
MFC after: 2 weeks
as this can result in a NULL pointer deference when parsing the
flags later. This change fixes "pkg_add -r" on 5.0-CURRENT for
me; not quite clear how the problem was introduced.
that it prefaces the output with the package name.
This is useful for things like this:
# pkg_info -Qsa | awk -F : '{print $2 "\t" $1}' | sort -rn | expand -t 10
without the /sys symlink pointing to the current tree.
(Revision 1.2 made it non-fatal, but anyway.)
Apply style.Makefile(5).
Fixed ``make checkdpadd''.
next time the subroutine is re-entered
o s/configrun/configflag/
o Make the prompt make sense if the user was creating a configuration file
Approved by: markm (mentor)(implicit)
Kernel:
Change statistics to use the *uptime() timescale (ie: relative to
boottime) rather than the UTC aligned timescale. This makes the
device statistics code oblivious to clock steps.
Change timestamps to bintime format, they are cheaper.
Remove the "busy_count", and replace it with two counter fields:
"start_count" and "end_count", which are updated in the down and
up paths respectively. This removes the locking constraint on
devstat.
Add a timestamp argument to devstat_start_transaction(), this will
normally be a timestamp set by the *_bio() function in bp->bio_t0.
Use this field to calculate duration of I/O operations.
Add two timestamp arguments to devstat_end_transaction(), one is
the current time, a NULL pointer means "take timestamp yourself",
the other is the timestamp of when this transaction started (see
above).
Change calculation of busy_time to operate on "the salami principle":
Only when we are idle, which we can determine by the start+end
counts being identical, do we update the "busy_from" field in the
down path. In the up path we accumulate the timeslice in busy_time
and update busy_from.
Change the byte_* and num_* fields into two arrays: bytes[] and
operations[].
Userland:
Change the misleading "busy_time" name to be called "snap_time" and
make the time long double since that is what most users need anyway,
fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same
timescale as the kernel fields.
Change devstat_compute_etime() to operate on struct bintime.
Remove the version 2 legacy interface: the change to bintime makes
compatibility far too expensive.
Fix a bug in systat's "vm" page where boot relative busy times would
be bogus.
Bump __FreeBSD_version to 500107
Review & Collaboration by: ken
one three times before we did the dump. Also, we printed 0x00 for the
tuple type rather than the actual tuple type. Now, we print the
actual tuple type. This appears to have no ill effects.
Should get rid of the
Code NN not found
and
code Unknown ignored
messages. The ignored messages are still generated for tuples tuples
who have a minimum length set and we find a tuple of that type that's
shorter than the minimum length.
how `crc' is actually defined.
- Remove an unnecessary `extern' variable declaration.
Data type corrections:
- Define a variable which contains a file byte offset value as type
off_t as required by the `crc' function.
- Change the type of a variable carrying a CRC checksum from `u_long'
to `uint32_t'.
- Substitute the wrong `extern' variable declaration of `crc_total'
by putting a correct one in the shared header extern.h.
`crc_total' is defined as an `uint32_t', thus fixing
incorrect mtree checksums on big-endian LP64 machines.
how `crc' is actually defined.
Data type corrections:
- Define variables which contain file byte offset values as type
off_t as required by the `crc' function.
- Change the type of a variable carrying a CRC checksum from `u_long'
to `uint32_t'.
- Parse the length of a file with sscanf as `intmax_t'
(as there is no conversion specifier for `off_t').
Style(9):
- Put an empty line between #include directives for system and user
header files.
and due to buffering they would sometimes come out after the actual
error message when mkheaders() failed due to an unknown device, so you'd
get an error messages followed by 20 or 30 lines of harmless warnings.
There are lots of other warning messages in config(8) that are printed
on stdout, but these were the most egregious (at least with LINT).
a filename pattern, and also wrt filenames given on the command line.
Now if a file is listed as a specific entry, it will not *also* be
processed by an entry specifying a pattern. And filename-patterns
will now only match existing files (ignoring directories, etc).
MFC after: 3 weeks
will contain the pid for a process group. This means the file must
contain a negative value (as would be needed in the 'kill' commmand).
I still need to write man-page update before MFC-ing.
This started by rewriting the get_pid() routine. Later I looked at
what OpenBSD has, and included a few ideas from their send_signal()
routine. So, parts of this change are from OpenBSD, even though
OpenBSD does not actually have a 'U' flag.
PR: bin/28435
Reviewed by: no objections on freebsd-arch
MFC after: 3 weeks
warning message if -s is specified and it rotates a file that expects
to be compressed. This warning message is not printed if -R is also
specified, because we assume a -sR request is coming from the process
which would have been signaled, and that it has already released the
logfile.
Indirectly noticed by: sheldonh
