for the AR9280 based NICs if it's actually enabled.
Some of the OLC code was erroneously called during setup
and calibration. This may have caused some incorrect behaviour.
Xen timer and time counter to provide one-shot and periodic time events.
On my tests this reduces idle interruts rate down to about 30Hz, and accor-
ding to Xen VM Manager reduces host CPU load by three times comparing to
the previous periodic 100Hz clock. Also now, when needed, it is possible to
increase HZ rate without useless CPU burning during idle periods.
Now only ia64 and some ARMs left not migrated to the new event timers.
table which contains the per-rate target TX power.
This code is shared between the v14 eeprom board setup (AR5416, AR9160,
AR9280) and will also be used by the upcoming Kite (AR9287) support.
* grab the main, alt and selected LNA config
* add some optional / disabled logging code
* add a check to reject packets with an invalid main rssi too,
in case the alt is the active receive chain and main is -ve.
Note: The software-controlled combined diversity code is still disabled.
should not change. Fetch the td_user_pri under the thread lock. This
is probably not necessary but a magic number also seems preferable to
knowing the implementation details here.
Requested by: Jason Behmer < jason DOT behmer AT isilon DOT com >
- Use bus_bind_intr() to bind interrupt to a CPU when RSS/TSS is used.
- Use M_DONTWAIT for RSS/TSS buffer allocation.
- Add statistic to track max DRBR queue depth.
- Fix problem in bxe_change_mtu() which referenced the old MTU size
in a debug print statement.
MFC after: Two weeks
disabled for BCM5719 A0 revision due to known hardware errata.
Many thanks to Broadcom for continuing support of FreeBSD.
Submitted by: Geans Pin at Broadcom
AR8132 FastEthernet controller. The PHY has no ability to
establish a gigabit link. Previously only link parters which
support down-shifting was able to establish link.
This change should fix a long standing link establishment issue of
AR8132.
PR: kern/156935
MFC after: 1 week
systems. In principle, FreeBSD should run on at least some of these
already, and support for the remainder will hopefully show up eventually,
so add this while I'm thinking about it.
Casting a pointer to a wide integer is probably not that bad, but I am
still guilty of not testing this.
Pointyhat to: avg
MFC after: 1 week
X-MFC with: r221803
file and processes information retrieval from the running kernel via sysctl
in the form of new library, libprocstat. The library also supports KVM backend
for analyzing memory crash dumps. Both procstat(1) and fstat(1) utilities have
been modified to take advantage of the library (as the bonus point the fstat(1)
utility no longer need superuser privileges to operate), and the procstat(1)
utility is now able to display information from memory dumps as well.
The newly introduced fuser(1) utility also uses this library and able to operate
via sysctl and kvm backends.
The library is by no means complete (e.g. KVM backend is missing vnode name
resolution routines, and there're no manpages for the library itself) so I
plan to improve it further. I'm commiting it so it will get wider exposure
and review.
We won't be able to MFC this work as it relies on changes in HEAD, which
was introduced some time ago, that break kernel ABI. OTOH we may be able
to merge the library with KVM backend if we really need it there.
Discussed with: rwatson
This brings our implementation in line with OSS specification for
systems that support mmap. The change should also improve compatibility
with OSS software not specifically written for FreeBSD, e.g. PulseAudio
OSS plugin.
Reviewed by: kib, jhb
MFC after: 1 week
probed and read successfull, but it contains invalid values (e.g.
overlapped partitions, offset or size is out of bounds), then table
will be rejected.
MFC after: 1 month
* revert a local path change that shouldn't have made it to the commit
* fix some indenting/wrapping
* Fix the ale data copy - i should be copying into the ale data pointer,
not over the ale entry itself.
configuration files.
If the current file differs from the canonical version from the old release
only due to differences in the $FreeBSD$ tag (which can happen if the system
was installed from source code, depending on how the src tree was checked out)
then freebsd-update will treat the file as "unmodified" and silently update
it to the "clean" version in the new release.
If the only change being made to a configuration file is in the $FreeBSD$
tag (e.g., for any configuration files which have been modified locally, now
that we're using SVN and the $FreeBSD$ tag changes when a branch is created),
freebsd-update will no longer print the diff and prompt "Does this look
reasonable (y/n)?".
Nagged by: pgollucci
MFC after: 1 month
environments.
In setups where NF calibration can take a while, don't load the CCA
and kick off a new NF calibration if the previous one hasn't yet
completed. This shouldn't happen unless the environment is noisy but
those exist (hi phk!).
Here, if the previous NF hasn't completed when ar5416LoadNf() is run
(which reads the NF), it skips updating the history buffer, loading
the NF CCA array and kicking off the next NF cal. It's hoped it'll
occur in the next long calibration interval.
Obtained from: Atheros, ath9k, my local HAL
