Sync determining the git count with newvers.sh by adding the
--first-parent argument. This ensures uname(1) reflects the
file name for snapshots.
Reported by: Mark Millard
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Remove tmpfs size limitation, this breaks make installworld and installation of some packages
Format generated fstab using tabs to make it consistent and readable
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29283
Man pages can be big in total, add an options to split man pages
in -man packages so we produce smaller packages.
This is useful for small jails or mfsroot produced of pkgbase.
The option is off by default.
Reviewed by: bapt, Mina Galić <me@igalic.co>
Differential Revision: https://reviews.freebsd.org/D29169
MFC after: 2 weeks
They aren't needed and produce wrong package comments :
We use to have "runtime-dev package" instead of
"FreeBSD Base System (Development Files)" for example
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29168
MFC after: 2 weeks
Pass UNAME_r override to make(1) for ports builds when building
ports for another branch.
MFC after: 3 days
MFC with: 0be274d373, 80ab50e1de, c883b6fd8c
Sponsored by: Rubicon Communications, LLC ("Netgate")
truncate(1) is not case-sensitive with regard to setting the size
of a file. makefs(8), however, does not honor upper-case values.
Update release-specific files and the release(7) manual page to
reflect this.
MFC with: 1ca8842f3a
Submitted by: ehem_freebsd_m5p.com (original)
Differential Review: https://reviews.freebsd.org/D28979
Sponsored by: Rubicon Communications, LLC ("Netgate")
This had prevented the bootconfig step from determining if an ESP exists,
resulting in its unconditional setup. On BIOS-booted amd64, this wasn't
harmful, just unnecessary, but it resulted in failed installations on
non-EFI-supporting platforms like powerpc64.
MFC after: 3 days
In followup to 80ab50e1de,
export UNAME_r in Makefile.inc1 instead of Makefile.vm.
MFC after: 3 days
MFC with: 80ab50e1de
Sponsored by: Rubicon Communications, LLC ("Netgate")
Using makefs instead reduces the privileges needed to build VM images,
simplifies the script (no need to copy files to a fresh image at the end),
and improves portability by allowing generation of cross-endian images.
As a result of the last, this patch also adds support for generation of
powerpc64 and powerpc64le VM images.
No other changes to the output. Tested and working for both amd64 and
powerpc64 targets.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D28912
These images only ever worked on Apple Powermacs, which are now a very
old platform, and did so only for a very loose definition of "worked"
(they booted on a small subset of supported machines). Moreover, all
the machines they *did* boot on also would boot from a memstick made
by dd'ing an CD image to a flash drive. Since a flash drive prepared
in this way would also boot all the newer systems we support, the
memstick images were strictly less functional than the CD images, even
for booting from memory sticks.
Reviewed by: jhibbits
MFC after: 1 week
Following 7b1d1a1658, the structure
for the reldoc target has significantly changed as result of the
ASCIIDoctor/Hugo migration. As the release notes related files
on the installation medium are inherently out of date, purge them
entirely.
Discussed within: re, doceng
No objection: re (silence), doceng (silence)
Timeout: 2 weeks
MFC after: 1 week
MFC to: stable/13, stable/12, and stable/11 only
Sponsored by: Rubicon Communications, LLC ("Netgate")
Add PBUILD_FLAGS and UNAME_r overrides to extra_chroot_setup()
to fix building ports for 14-CURRENT builds on 13.x.
MFC after: 3 days
MFC with: c511a5ab53
Sponsored by: Rubicon Communications, LLC ("Netgate")
The 'reldoc' target includes release-related documentation on
installation medium. Since the switch from XML to ASCIIDoctor,
the file locations have moved, and it will take some time to sort
out how this target should work now.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
The ports tree is scheduled to be converted from Subversion to Git
after the currently-scheduled 13.0-RELEASE, so the source of truth
will be Subversion for the ports tree.
Implement a hack specifically for this case.
Sponsored by: Rubicon Communications, LLC (netgate.com)
Hard-code the GITROOT for the ports tree to use cgit-beta
until the ports repository is converted.
While here, remove $FreeBSD$ RCS IDs.
Sponsored by: Rubicon Communications, LLC (netgate.com)
We now have a u-boot port and config.txt for booting on all 64bits
variant of the RPI boards (RPI2v1.1, RPI3* and RPI4*) so use
the new u-boot-rpi-arm64 and the config_arm64.txt files.
Discussed with: karels, kevans
For platforms that don't have any of the memstick, cdrom, or dvdrom
release images (i.e. riscv64), the release-install target will trip up
when invoking md5(1) on the non-existent image files. Skipping this
allows the install to complete successfully.
Add two release flavors for RISC-V. First, the traditional "big-iron"
images, capable of generating distribution sets and VM images. Installer
images won't be built yet, but can be trivially enabled in the future
with the addition of riscv/make-memstick.sh.
Second, a GENERICSD embedded image. I've opted for this instead of
board-specific SD card images as it allows users to just dd the u-boot
they want. The RISC-V hardware ecosystem is still young, so a
configuration for e.g. the new PolarFire SoC Icicle Kit would likely see
very few users.
Reviewed by: gjb
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27045
RISC-V has the same booting requirements as arm64 (loader.efi, no legacy
boot options), so generated images for both architectures have the same
partition layout.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D27044
Since the few existing RISC-V hardware platforms are single board
computers, we can piggyback off of arm/arm64's embedded build support
for generating SD card images.
I don't see a pressing need to change the naming in this file at this
time.
Reviewed by: gjb, manu
Differential Revision: https://reviews.freebsd.org/D27043
Both RPI2 and BEAGLEBONE are still popular and used arm boards.
Both u-boots can coexist as they are named differently and live in the
fat partition.
This leave us with only one image that can be used for both of those
boards and all the other ones supported by FreeBSD provided that you
install the correct u-boot on it.
Reviewed by: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27283
All those board are impossible to buy nowadays and could boot using the
GENERICSD image after putting the correct u-boot on them.
Reviewed by: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27282
Allwinner bootrom have an alternate location for u-boot at 128k.
Work was made recently in u-boot to relocate correctly if loaded from
there.
The advantage of this offset is that we can now use a GPT scheme.
A lot of projects CI can't do FreeBSD tests currently.
The main reason is that the project CI infrastructure is runned on Linux
and that our images aren't modifiable from a Linux hosts.
Add a basic image specific for this case (called BASIC-CI for a lack of a
better name).
The image have no package pre-installed.
It only have a few modification to have dhcp client runned on the default
interface and sshd started with option to be able to log on without a password
as root.
Sponsored by: The FreeBSD Foundation
Reviewed by: re (gjb@)
Differential Revision: https://reviews.freebsd.org/D25598
We create a UFS root filesystem using makefs(8), and later pass it to
mkimg(1) when creating the final image. The correct partition type is
freebsd-ufs; the freebsd parition type is for partitions containing a
BSD disklabel.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26987
These images were switched to MBR in r281876 as a way to cope with a
hard-coded partition GUID in QEMU's default EFI firmware. Enough time
has passed that this is no longer a problem; QEMU versions >= 4.0
include a copy of edk2 EFI firmware that can detect the root filesystem
properly. Alternatively, sysutils/u-boot-qemu-arm64 can be used.
Switch back to building these images with a GPT partition table, and
re-enable the swap partition.
Reviewed by: gjb, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26986
The return code of write_partition_layout() doesn't bubble up, so an
invocation of make vm-release for an incorrect/unsupported target will
appear to succeed while make vm-install will fail due to missing
files. This isn't a common point of failure, but is worth handling
properly.
Upgrade this case to print a message to stderr, and exit in place. This
is okay to do since at this point in the execution of mk-vmimage.sh,
cleanup() has already been run.
Reviewed by: gjb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26985
De-duplicate the invocation of mkimg(1). No functional change.
Reviewed by: gjb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26984
At some poing over the last week, the bootx64.efi file has grown
past the 800KB threshold, resulting in being unable to copy it to
the EFI/BOOT directory.
# stat -f %z efiboot.znWo7m
819200
# stat -f %z stand-test.PIEugN/EFI/BOOT/bootx64.efi
842752
The comment in the script that creates the ISOs suggests that 800KB
is the maximum allowed for the boot code, however I was able to
boot an ISO with a 1024KB boot partition. Additionally, I verified
against an ISO from OtherOS, where the boot EFI partition is 2.4MB.
Sponsored by: Rubicon Communications, LLC (netgate.com)
This was originally part of the initial commit, but after discussion in
D26399, I split it out into its own commit after the kernel config file.
Sponsored by: Tag1 Consulting, Inc.
