o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
+ check a possible buffer overflow when creating a temp file,
submitted by Christoph Mallon
+ remove stale struct definitions
+ clarify the use of dflag and remove useless checks
MFC after: 3 days
typos and reference the kernel file which processes this info.
All in all, the content of this file should be moved to kldxref.c
or to the kld(4) manpage.
MFC after: 3 days
ARCHSTRING into the new MM_MAKE variable.
We only need to check for the presence of the target of $PAGER
if that variable is actually set. [1]
Pointed out by: Steve Kargl <sgk@troutmask.apl.washington.edu> [1]
====================
1. List the command line options in a more standard way
2. Improve the explanations of some of the arguments (-A, -D)
3. Add ARCHSTRING and MTREEDB to the example rc file
4. Re-sort some of the examples according to the existing distinction
of "has a command line version" vs. "does not have a command line version"
Document changes for r186678
===========================
1. /usr/src/etc -> /usr/src where needed [1]
2. Add IGNORE_FILES to the example rc [2] (and remove IGNORE_MOTD)
3. Update the EXIT STATUS section for [3] and [4]
Update Copyright and .Dd accordingly
PR: bin/96528 [1]
Submitted by: ru [1]
PR: bin/106642 [2]
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
PR: bin/122282 [3]
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> [3]
PR: bin/108183 [4]
Submitted by: Riccardo Torrini <riccardo@torrini.org> [4]
=======================
1. Various improvements to the mtree (-U) feature:
a. Seperate the notion of directory and file (user can override db path)
b. Only check for the existence of the mtree file if -U is set
c. Use mktemp to create the new version of the file
d. More safely install the new file
e. Standardize error messages a bit
2. Remove the last of the MAKEDEV stuff (RIP)
New Features
============
1. Switch to using the top level (e.g., /usr/src) Makefile, and specify
that we should use the *.mk files from the source directory instead of
the installed versions. [1][2] This allows easier cross builds and
simplifies (or in some cases permits) upgrading.
2. Check for the deprecated 'nodev' option in /etc/fstab [3]
3. Add support for the IGNORE_FILES variable [4] and deprecate IGNORE_MOTD
accordingly.
4. Before installing a file check to make sure that the target does not
already exist as a directory [5]
5. Check to be sure that the file installed and error out if not
PR: bin/96528 [1]
Submitted by: ru [1]
PR: bin/129639 [2]
Submitted by: sam [2]
PR: bin/122282 [3]
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> [3]
PR: bin/106642 [4]
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk> [4]
PR: bin/108183 [5]
Submitted by: Riccardo Torrini <riccardo@torrini.org> [5]
that differ only by VCS Id) for the following reasons:
1. It was added without my consent, review, or even a heads up
2. It is something that I've repeatedly said I do not want, and certainly
do not want as the default
3. It is poorly implemented (much too complex, produces false positives
e.g., /etc/mail/helpfile)
Given that this is a situation that comes up very infrequently (usually
only for a major version upgrade) and can usually be handled simply
enough on a one-off basis, I will once again point out that I think
this is a Bad Idea. I would be willing to consider a better implementation
as an option that is off by default.
is, consistently call it the boot manager, and switch the order the
options are presented so no boot manager is first in the list (and
hence more or less the default).
This area will probably be rototilled more before 8.0 comes out.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:
- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)
All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.
To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.
I expect no changes of the NDIS code for PCI, PCMCIA devices.
Obtained from: //depot/projects/ndisusb/...
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
regenerated in libugidfw) rather than simply printing that the rule was
added with only the number. This makes ugidfw(8) behave a bit more like
ipfw(8), and also means that the administrator sees how the rule was
interpreted once uids/gids/etc were processed.
Obtained from: TrustedBSD Project
For example, ^C (SIGINT) may leave the drive spinning and locked.
This may also happen if you try to write a too-large image to a disc
and burncd(8) exits with an I/O error.
Add signal handling by doing a CDRIOCFLUSH ioctl to attempt to leave
burner in a sane state when burning is interrupted with SIGHUP, SIGINT,
SIGTERM, or in case an I/O error occurs during write.
Note, that blanking will still continue after interrupt but it seems to
finish correctly even after burncd(8) has quit.
Also, while I'm here bump WARNS to "6".
PR: 48730
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
install a p2p host route between the end points. The ppp module
upates this router based on user configuration later on. The
rt_Update() seems to always set the RTF_GATEWAY flag, which is
broken.
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
reasonable close to and in the same format as it had always.
r185435 said it would try that but I had been living with jail
patches for too long to actually remember the single-line format
when adding backwards compatibility back in p4.
Reported by: Philipp Wuensche <cryx-freebsd@h3q.com>
Tested by: Philipp Wuensche <cryx-freebsd@h3q.com>
MFC after: 4 weeks (just for me to get the mail)
Approved by: slong scottl@samsco.org
MFC after: 2 weeks
Final cleanup of fwcontrol.
NetBSD compatibility
Cleanup errors in usage() display
Finish up error handling via errx/warnx
Generate error on unparsed command line syntax
Change device(devbase) to open into the form /dev/fwX.X
outside the prison_states array.
When checking if there is a name configured for the prison, check the
first character to not be '\0' instead of checking if the char array
is present, which it always is. Note, that this is different for the
*jailname in the syscall.
Found with: Coverity Prevent(tm)
CID: 4156, 4155
MFC after: 4 weeks (just that I get the mail)
boot0.S changes:
+ import a patch from Christoph Mallon to rearrange the various
print functions and save another couple of bytes;
+ implement the suggestion in PR 70531 to enable booting from
any valid partition because even the extended partitions that
were previously in our kill list may contain a valid boot loader.
This simplifies the code and saves some bytes;
+ followwing up PR 127764, implement conditional code to preserve
the 'Volume ID' which might be used by other OS (NT, XP, Vista)
and is located at offset 0x1b8. This requires a relocation of the
parameter block within the boot sector -- there is no other
possible workaround.
To address this, boot0cfg has been updated to handle both
versions of the boot code;
+ slightly rearrange the strings printed in the menus to make
the code buildable with all options. Given the tight memory
budget, this means that with certain options we need to
shrink or remove certain labels.
and especially:
make -DVOLUME_LABEL -DPXE the default options.
This means that the newly built boot0 block will preserve the
Volume ID, and has the (hidden) option F6 to boot from INT18/PXE.
I think the extra functionality is well worth the change.
The most visible difference here is that the 'Default: ' string
now becomes 'Boot: ' (it can be reverted to the old value
but then we need to nuke 1/2 partition name or entries to
make up for the extra room).
boot0cfg changes:
+ modify the code to recognise the new boot0 structure (with the
relocated options block to make room for the Volume id).
+ add two options, '-i xxxx-xxxx' to set the volume ID, -e c
to modify the character printed in case of bad input
PR: 127764 70531
Submitted by: Christoph Mallon (portions)
MFC after: 4 weeks
contrib/openbsm (svn merge) and sys/{bsm,security/audit} (manual merge).
- Add OpenBSM contrib tree to include paths for audit(8) and auditd(8).
- Merge support for new tokens, fixes to existing token generation to
audit_bsm_token.c.
- Synchronize bsm includes and definitions.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
--
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not being arguments so
that const strings can be passed as arguments to tokens. This patch was
submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
This option prints the list of sampled PCs along with the function name,
the start and end addresses of this where their live within.
Reviewed by: jkoshy
Tested by: gnn
Sponsored by: Nokia
the following syntax in the kernel config.
makeoptions MODULES_OVERRIDE=foo
makeoptions MODULES_OVERRIDE+=bar
makeoptions MODULES_OVERRIDE+=baz
Bump config minor version to 600007.
assumed it had to toggle between attribute and common memory in the
cards. The kernel is supposed to cope with that automatically and
give us a tuple list. However, there's a number of details of how
that happens that's currently, ummm, magical and/or not implemented
for 16-bit PC Cards that have CIS_LONGLINK_C tuples in them (eg, mix
both attribute memory and common memory). Also, CIS_LOGNLINK_A
entries might not be handled completely correctly either, since there
can be gaps in the attribute vs common stuff.
All this will need to be corrected in the kernel. Once it is
corrected, dumpcis can be made even simpler in some ways, a little
more complicated in others once an API for presentation of CIS to
userland in these weird cases is settled upon.
pccardc) parsed data to make decisions about stuff related to card
configuration.
The purely CIS dumping aspect of this program obviates the need for
such parsing. Save some space and don't parse the data anymore for
configuration purposes. Just parse it to print an interpreatation of
it.
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
1. Make it more SMP polite. Previous version uses average CPU load that
often leads to load underestimation. It make powerd with default
configuration unusable on systems with more then 2 CPUs. I propose to use
summary load instead of average one. IMO this is the best we can do without
specially tuned scheduler. Also as soon as measuring total load on SMP
systems is more useful then total idle, I have switched to it.
2. Make powerd's operation independent from number and size of frequency
levels. I have added internal frequency counter which translated into real
frequencies only on a last stage and only as good as gone. Some systems may
have only several power levels, while others - many of them, so adaptation
time with previous approach was completely different.
3. As part of previous I have changed adaptive mode to rise frequency on
demand up to 2 times and fall on 1/8 per time internal.
4. For desktop (AC-powered) systems I have added one more mode - "hiadaptive".
It rises frequency twice faster, drops it 4 times slower, prefers twice
lower CPU load and has additional delay before leaving the highest frequency
after the period of maximum load. This mode was specially made to improve
interactivity of the systems where operation capabilities are more
significant then power consumption, but keeping maximum frequency all the
time is not needed.
5. I have reduced default polling interval from 1/2 to 1/4 of second.
It is not so important for algorithm math now, but gives better system
interactivity.
Discussed on: mobile@
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
We often run into these very high column numbers when we run curses
applications, because they don't print any newlines. This messes up the
table output of `pstat -t'. If these numbers get really high, they
aren't of any use to the reader anyway. Convert them to `99999' when
they run out of bounds.
one zombie process because it does not do the cleanup. For a long running
NIS/YP server, it will have lots of zombie processes on it. Fix that by
ignoring the SIGCHLD signal since we don't really care about the exit
status in this case.
PR: bin/91980
Reported by: Arjan van der Velde <dj_noresult at hotmail.com>
Submitted by: Jui-Nan Lin" <jnlin at csie.nctu.edu.tw>
Reviewed by: delphij
MFC after: 1 month
selected from the "dists" are all on the current volume. Looks like
xorg won't fit on disc1 for 6.4-REL. Iterate through media volumes
for packages that wind up being selected from the dists section in
addition to the ones that get selected from the packages menu.
MFC after: 2 days
keymap. You can learn some interesting things in the PR database!
PR: conf/124411
Submitted by: Doctor Modiford <freebsd -at- modiford.com>
MFC after: 3 days
the user selected and then recursively installing their dependencies, finally
installing the ones the user selected after the recursion unwinds. Since
users often select "high-level" packages that are on a higher numbered
disc for the multi-volume release CDROMS this resulted in excessive disc
swapping while installing things like kde, gnome, etc.
Cut down on disc swapping by iterating through the disc volumes one at a
time if we notice the package set is on multiple volumes. If a package
is on a higher volume don't install it yet, but still "process it" so we
get its dependencies installed. Because of the way the package sets for
releases get assembled we're guaranteed dependencies will be on the same
volume or lower.
Reviewed by: jhb
MFC after: 1 week
messages from the network. We already replace malformatted timestamps
and this option lets us replace timestamps that are correctly formatted
but wrong.
PR: 120891
Submitted by: Thomas Vogt <thomas@bsdunix.ch>
MFC after: 1 week
One of the features that prevented us from fixing some of the TTY
consumers to work once again, was an interface that allowed consumers to
do the following:
- `Sniff' incoming data, which is used by the snp(4) driver.
- Take direct control of the input and output paths of a TTY, which is
used by ng_tty(4), ppp(4), sl(4), etc.
There's no practical advantage in committing a hooks layer without
having any consumers. In P4 there is a preliminary port of snp(4) and
thompsa@ is busy porting ng_tty(4) to this interface. I already want to
have it in the tree, because this may stimulate others to work on the
remaining modules.
Discussed with: thompsa
Obtained from: //depot/projects/mpsafetty/...
