for custom vendor-specific changes to FreeBSD's
default settings.
While here, fix a typo: perfomance -> performance
PR: 245404
Submitted by: Jose Luis Duran
With the removal of in-tree consumers of DES, Triple DES, and
MD5-HMAC, the only algorithm this driver still supports is SHA1-HMAC.
This is not very useful as a standalone algorithm (IPsec AH-only with
SHA1 would be the only user).
This driver has also not been kept up to date with the original driver
in OpenBSD which supports a few more cards and AES-CBC on newer cards.
The newest card currently supported by this driver was released in
2005.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24691
source that works or is the new location on the
same page.
Submitted by: alfix86_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23769
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
- Abbreviated month name in .Dd
- position of HISTORY section
- alphabetical ordering within SEE ALSO section
- adding .Ed before .Sh DESCRIPTION
- remove trailing whitespaces
- Line break after a sentence stop
- Use BSD OS macros instead of hardcoded strings
No .Dd bumps as there was no actual content change made
in any of these pages.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24591
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching _epg.
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598
- Inconsistencies in .Dd like abbreviated month names,
"th" after numbers, or leading zeros
- No line breaks after a sentence stop
- Whitespace at the end of the line
- Use macros for BSD OS names instead of hardcoded names
- CAVEATS instead of CAVEAT in section name
No actual content change in terms of additions were made, so
no bump of the .Dd for these man pages.
All of these issues were found and fixed by Gordon Bergling.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24648
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
Gordon Bergling. Hook it up to the build by adding
it to the Makefile.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24589
epoch(9).
In one instance, remove a trailing whitespace while here.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24243
section, it would result in the following error:
"ngctl: send msg: Invalid argument"
The reason for this is the missing whitespace to
separate the arguments. When adding the whitespace,
the example works as intended.
Submitted by: lutz_donnerhacke.de
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23773
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
The sysctl output looks like this:
dev.hwpstate_intel.0.epp: 50
dev.hwpstate_intel.0.%parent: cpu0
dev.hwpstate_intel.0.%pnpinfo:
dev.hwpstate_intel.0.%location:
dev.hwpstate_intel.0.%driver: hwpstate_intel
dev.hwpstate_intel.0.%desc: Intel Speed Shift
but all the '%' got escaped in the manual page, un-escape them.
While here:
- Move the example of dev.hwpstate_intel.%d.%parent after the description to
align with others.
- Capitalize "CPU" (*)
Submitted by: danfe (*)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24520
The sole in-tree user of this flag has been retired, so remove this
complexity from all drivers. While here, add a helper routine drivers
can use to read the current request's IV into a local buffer. Use
this routine to replace duplicated code in nearly all drivers.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24450
It is not valid to pass BUS_SPACE_UNRESTRICTED to bus_dma_tag_create()'s
nsegments parameter as it is interpreted as a very large segment count.
Subsequent allocation operations on the tag will preallocate some multiple of
that count. BUS_SPACE_UNRESTRICTED therefore indicates something like:
malloc(infinity).
Discussed with: bcr, jhb (earlier version)
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
I hope to extend this with some more detail in the future but it gives
a good starting point.
Thanks to 0mp for assistance with markup.
Reviewed by: jkoshy
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23982
Document the kernels and worlds targets. Document the TARGETS and EXTRA_TARGETS
variables.
Reviewed by: brooks, bdrewery, emaste (LGTM)
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D24212
Add 'WITHOUT_WORLDS' and 'WITHOUT_KERNELS' as aliases for the inconsistently
named MAKE_JUST_KERNELS and MAKE_JUST_WORLDS respectively. I always forget the
MAKE_ part (or is it BUILD_), and it's inconsistent with everything
else. Document the new things, but leave speculation of any eventual MAKE_JUST_*
deprecation out of the manuals and comments.
Reviewed by: brooks, bdrewery, emaste (LGTM)
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D24212
for IPv4, enabled only for IPv6, and enabled for IPv4 and IPv6.
The current blackhole detection might classify a temporary outage as
an MTU issue and reduces permanently the MSS. Since the consequences of
such a reduction due to a misclassification are much more drastically
for IPv4 than for IPv6, allow the administrator to enable it for IPv6 only.
Reviewed by: bcr@ (man page), Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24219
EINTEGRITY was previously documented as a UFS-specific error for
mount(2). This documents EINTEGRITY as a filesystem-independent error
that may be reported by the backing store of a filesystem.
While here, document EIO as a filesystem-independent error for both
mount(2) and posix_fadvise(2). EIO was previously only documented for
UFS for mount(2).
Reviewed by: mckusick
Suggested by: mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24168
