This issue would be silent most of the time, but if the requested memory
is a multiple of a page size, then accessing one element beyond the end
would lead to a kernel page fault.
Otherwise, the unlucky last type would just be inaccessible.
Reported by: glebius
Tested by: glebius
MFC after: 6 days
Clang errors around printf could be trivially fixed, but the breakage in
sbin/fsdb were to significant for this type of change.
Submitter of this changeset has been notified and hopefully this can be
restored soon.
that they do not need to be read again in pass5. As this nearly
doubles the memory requirement for fsck, the cache is thrown away
if other memory needs in fsck would otherwise fail. Thus, the
memory footprint of fsck remains unchanged in memory constrained
environments.
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
running time for a full fsck. It also reduces the random access time
for large files and speeds the traversal time for directory tree walks.
The key idea is to reserve a small area in each cylinder group
immediately following the inode blocks for the use of metadata,
specifically indirect blocks and directory contents. The new policy
is to preferentially place metadata in the metadata area and
everything else in the blocks that follow the metadata area.
The size of this area can be set when creating a filesystem using
newfs(8) or changed in an existing filesystem using tunefs(8).
Both utilities use the `-k held-for-metadata-blocks' option to
specify the amount of space to be held for metadata blocks in each
cylinder group. By default, newfs(8) sets this area to half of
minfree (typically 4% of the data area).
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
There are three situations where the sysctl script is called:
1. "start", very early
2. "lastload", near the end of rc
3. "reload", at admin request while the system is booted
Ignore unknown OIDs in situation 1 because kernel modules may not be loaded
yet and complain about them in situations 2 and 3.
PR: conf/174595
Submitted by: Olivier Smedts
Update libarchive to 3.1.2
Some of new features:
- support for lrzip and grzip compression
- support for writing tar v7 format
- b64encode and uuencode filters
- support for __MACOSX directory in Zip archives
- support for lzop compresion (external utility)
u_long. Before this change it was of type int for syscalls, but prototypes
in sys/stat.h and documentation for chflags(2) and fchflags(2) (but not
for lchflags(2)) stated that it was u_long. Now some related functions
use u_long type for flags (strtofflags(3), fflagstostr(3)).
- Make path argument of type 'const char *' for consistency.
Discussed on: arch
Sponsored by: The FreeBSD Foundation
UMTX_PROFILING should really analyze the distribution of locks as they
index entries in the umtxq_chains hash-table.
However, the current implementation does add/dec the length counters
for *every* thread insert/removal, measuring at all really userland
contention and not the hash distribution.
Fix this by correctly add/dec the length counters in the points where
it is really needed.
Please note that this bug brought us questioning in the past the quality
of the umtx hash table distribution.
To date with all the benchmarks I could try I was not able to reproduce
any issue about the hash distribution on umtx.
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff, davide
MFC after: 2 weeks
original 2us are indeed not enough, 3us are working quite well on my tests.
To be more safe set minimal period to 5us and to be even more safe replicate
here from HPET mechanism of rereading counter after programming comparator.
This change allows to handle 30K of short nanosleep() calls per second on
Raspberry Pi instead of just 8K before.
Discussed with: gonzo
SIGSTOP if stop signals are currently deferred. This can occur if a
process is stopped via SIGSTOP while a thread is running or runnable
but before it has set TDF_SBDRY.
Tested by: pho
Reviewed by: kib
MFC after: 1 week
satisfy some alignment restrictions. Do not set TW_OSLI_REQ_FLAGS_CCB
flag for mapped data, pass the csio->data_ptr in the req->data.
Do not put the ccb pointer into req->data ever, ccb is stored in
req->orig_req already.
Submitted by: Shuichi KITAGUCHI <ki@hh.iij4u.or.jp>
PR: kern/177020
Previously TRIM processing was very bursty. This was made worse by the fact
that TRIM requests on SSD's are typically much slower than reads or writes.
This often resulted in stalls while large numbers of TRIM's where processed.
In addition due to the way the TRIM thread was only woken by writes, deletes
could stall in the queue for extensive periods of time.
This patch adds a number of controls to how often the TRIM thread for each
SPA processes its outstanding delete requests.
vfs.zfs.trim.timeout: Delay TRIMs by up to this many seconds
vfs.zfs.trim.txg_delay: Delay TRIMs by up to this many TXGs (reduced to 32)
vfs.zfs.vdev.trim_max_bytes: Maximum pending TRIM bytes for a vdev
vfs.zfs.vdev.trim_max_pending: Maximum pending TRIM segments for a vdev
vfs.zfs.trim.max_interval: Maximum interval between TRIM queue processing
(seconds)
Given the most common TRIM implementation is ATA TRIM the current defaults
are targeted at that.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
MFC after: 2 weeks
Currently, the trim module uses the same algorithm for data and cache
devices when deciding to issue TRIM requests, based on how far in the
past the TXG is.
Unfortunately, this is not ideal for cache devices, because the L2ARC
doesn't use the concept of TXGs at all. In fact, when using a pool for
reading only, the L2ARC is written but the TXG counter doesn't
increase, and so no new TRIM requests are issued to the cache device.
This patch fixes the issue by using time instead of the TXG number as
the criteria for trimming on cache devices. The basic delay principle
stays the same, but parameters are expressed in seconds instead of
TXGs. The new parameters are named trim_l2arc_limit and
trim_l2arc_batch, and both default to 30 second.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: 17122c31ac
MFC after: 2 weeks
This patch adds some improvements to the way the trim module considers
TXGs:
- Free ZIOs are registered with the TXG from the ZIO itself, not the
current SPA syncing TXG (which may be out of date);
- L2ARC are registered with a zero TXG number, as L2ARC has no concept
of TXGs;
- The TXG limit for issuing TRIMs is now computed from the last synced
TXG, not the currently syncing TXG. Indeed, under extremely unlikely
race conditions, there is a risk we could trim blocks which have been
freed in a TXG that has not finished syncing, resulting in potential
data corruption in case of a crash.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: 5b46ad40d9
MFC after: 2 weeks
The trim map inflight writes tree assumes non-conflicting writes, i.e.
that there will never be two simultaneous write I/Os to the same range
on the same vdev. This seemed like a sane assumption; however, in
actual testing, it appears that repair I/Os can very well conflict
with "normal" writes.
I'm not quite sure if these conflicting writes are supposed to happen
or not, but in the mean time, let's ignore repair writes for now. This
should be safe considering that, by definition, we never repair blocks
that are freed.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: Source: 6a3cebaf7c
This adds TRIM support to cache vdevs. When ARC buffers are removed
from the L2ARC in arc_hdr_destroy(), arc_release() or l2arc_evict(),
the size previously occupied by the buffer gets scheduled for TRIMming.
As always, actual TRIMs are only issued to the L2ARC after
txg_trim_limit.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: 31aae37399
MFC after: 2 weeks
includes MFV 238590, 238592, 247580
MFV 238590, 238592:
In the first zfs ioctl restructuring phase, the libzfs_core library was
introduced. It is a new thin library that wraps around kernel ioctl's.
The idea is to provide a forward-compatible way of dealing with new
features. Arguments are passed in nvlists and not random zfs_cmd fields,
new-style ioctls are logged to pool history using a new method of
history logging.
http://blog.delphix.com/matt/2012/01/17/the-future-of-libzfs/
MFV 247580 [1]:
To address issues of several deadlocks and race conditions the locking
code around dsl_dataset was rewritten and the interface to synctasks
was changed.
User-Visible Changes:
"zfs snapshot" can create more arbitrary snapshots at once (atomically)
"zfs destroy" destroys multiple snapshots at once
"zfs recv" has improved performance
Backward Compatibility:
I have extended the compatibility layer to support full backward
compatibility by remapping or rewriting the responsible ioctl arguments.
Old utilities are fully supported by the new kernel module.
Forward Compatibility:
New utilities work with old kernels with the following restrictions:
- creating, destroying, holding and releasing of multiple snapshots
at once is not supported, this includes recursive (-r) commands
Illumos ZFS issues:
2882 implement libzfs_core
2900 "zfs snapshot" should be able to create multiple,
arbitrary snapshots at once
3464 zfs synctask code needs restructuring
References:
https://www.illumos.org/issues/2882https://www.illumos.org/issues/2900https://www.illumos.org/issues/3464 [1]
MFC after: 1 month
Sponsored by: Hybrid Logic Inc. [1]
