panic: rw lock not unlocked
was not really helpful for debugging. Now one can at least call
show lock <ptr>
form ddb to learn more about the lock.
MFC after: 3 days
in order to avoid, on architectures which doesn't have strong ordered
writes, CPU instructions reordering.
Diagnosed by: fabio
Reviewed by: jhb
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
a pointer-fetching specific operation check. Consequently, rename the
operation ASSERT_ATOMIC_LOAD_PTR().
* Fix the implementation of ASSERT_ATOMIC_LOAD_PTR() by checking
directly alignment on the word boundry, for all the given specific
architectures. That's a bit too strict for some common case, but it
assures safety.
* Add a comment explaining the scope of the macro
* Add a new stub in the lockmgr specific implementation
Tested by: marcel (initial version), marius
Reviewed by: rwatson, jhb (comment specific review)
Approved by: re (kib)
Check that the given variable is at most uintptr_t in size and that
it is aligned.
Note: ASSERT_ATOMIC_LOAD() uses ALIGN() to check for adequate
alignment -- however, the function of ALIGN() is to guarantee
alignment, and therefore may lead to stronger alignment
enforcement than necessary for types that are smaller than
sizeof(uintptr_t).
Add checks to mtx, rw and sx locks init functions to detect possible
breakage. This was used during debugging of the problem fixed with
r196118 where a pointer was on an un-aligned address in the dpcpu area.
In collaboration with: rwatson
Reviewed by: rwatson
Approved by: re (kib)
adds probes for mutexes, reader/writer and shared/exclusive locks to
gather contention statistics and other locking information for
dtrace scripts, the lockstat(1M) command and other potential
consumers.
Reviewed by: attilio jhb jb
Approved by: gnn (mentor)
kern_time.c:
- Unused variable `p'.
kern_thr.c:
- Variable `error' is always caught immediately, so no reason to
initialize it. There is no way that error != 0 at the end of
create_thread().
kern_sig.c:
- Unused variable `code'.
kern_synch.c:
- `rval' is always assigned in all different cases.
kern_rwlock.c:
- `v' is always overwritten with RW_UNLOCKED further on.
kern_malloc.c:
- `size' is always initialized with the proper value before being used.
kern_exit.c:
- `error' is always caught and returned immediately. abort2() never
returns a non-zero value.
kern_exec.c:
- `len' is always assigned inside the if-statement right below it.
tty_info.c:
- `td' is always overwritten by FOREACH_THREAD_IN_PROC().
Found by: LLVM's scan-build
of spurious witness warnings since lockmgr grew witness support. Before
this, every time you passed an interlock to a lockmgr lock WITNESS treated
it as a LOR.
Reviewed by: attilio
spinning when readers hold a lock. This spinning is speculative because,
unlike the write case, we can not test whether the owners are running.
- Add speculative read spinning for readers who are blocked by pending
writers while a read lock is still held. This allows the thread to
spin until the write lock succeeds after which it may spin until the
writer has released the lock. This prevents excessive context switches
when readers and writers both hold the lock for brief periods.
Sponsored by: Nokia
These functions try the specified operation (rlocking and wlocking) and
true is returned if the operation completes, false otherwise.
The KPI is enriched by this commit, so __FreeBSD_version bumping and
manpage updating will happen soon.
Requested by: jeff, kris
- Move recursion checking into rwlock inlines to free a bit for use with
adaptive spinners.
- Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes
causing write spinners to restart their loop.
- Write spinners are limited by a count while readers hold the lock as
there is no way to know for certain whether readers are running still.
- In the read path block if there are write waiters or spinners to avoid
starving writers. Use a new per-thread count, td_rw_rlocks, to skip
starvation avoidance if it might cause a deadlock.
- Remove or change invalid assertions in turnstiles.
Reviewed by: attilio (developed parts of the patch as well)
Sponsored by: Nokia
the ABI when enabled. There is no longer an embedded lock_profile_object
in each lock. Instead a list of lock_profile_objects is kept per-thread
for each lock it may own. The cnt_hold statistic is now always 0 to
facilitate this.
- Support shared locking by tracking individual lock instances and
statistics in the per-thread per-instance lock_profile_object.
- Make the lock profiling hash table a per-cpu singly linked list with a
per-cpu static lock_prof allocator. This removes the need for an array
of spinlocks and reduces cache contention between cores.
- Use a seperate hash for spinlocks and other locks so that only a
critical_enter() is required and not a spinlock_enter() to modify the
per-cpu tables.
- Count time spent spinning in the lock statistics.
- Remove the LOCK_PROFILE_SHARED option as it is always supported now.
- Specifically drop and release the scheduler locks in both schedulers
since we track owners now.
In collaboration with: Kip Macy
Sponsored by: Nokia
currently, before to spin the turnstile spinlock is acquired and the
waiters flag is set.
This is not strictly necessary, so just spin before to acquire the
spinlock and to set the flags.
This will simplify a lot other functions too, as now we have the waiters
flag set only if there are actually waiters.
This should make wakeup/sleeping couplet faster under intensive mutex
workload.
This also fixes a bug in rw_try_upgrade() in the adaptive case, where
turnstile_lookup() will recurse on the ts_lock lock that will never be
really released [1].
[1] Reported by: jeff with Nokia help
Tested by: pho, kris (earlier, bugged version of rwlock part)
Discussed with: jhb [2], jeff
MFC after: 1 week
[2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
an unified way for all the lock primitives to express lock assertions.
Currenty, lockmgrs and rmlocks don't have assertions, so just panic in
that case.
This will be a base for more callout improvements.
Ok'ed by: jhb, jeff
opposed to what process. Since threads by default have teh name of the
process unless over-written with more useful information, just print the
thread name instead.
- Adjust lock_profiling stubs semantic in the hard functions in order to be
more accurate and trustable
- As for sx locks, disable shared paths for lock_profiling. Actually,
lock_profiling has a subtle race which makes results caming from shared
paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can
be actually used for re-enabling this paths, but is currently intended
for developing use only.
- style(9) fixes
Approved by: jeff, kmacy, jhb[1]
Approved by: re
[1] Had initial reservations not shared by others, conceded
in the end.
This is very similar to sx_init_flags: it initializes the rwlock using
special flags passed as third argument (RW_DUPOK, RW_NOPROFILE,
RW_NOWITNESS, RW_QUIET, RW_RECURSE).
Among these, the most important new feature is probabilly that rwlocks
can be acquired recursively now (for both shared and exclusive paths).
Because of the recursion counter, the ABI is changed.
Tested by: Timothy Redaelli <drizzt@gufi.org>
Reviewed by: jhb
Approved by: jeff (mentor)
Approved by: re
- Add a per-turnstile spinlock to solve potential priority propagation
deadlocks that are possible with thread_lock().
- The turnstile lock order is defined as the exact opposite of the
lock order used with the sleep locks they represent. This allows us
to walk in reverse order in priority_propagate and this is the only
place we wish to multiply acquire turnstile locks.
- Use the turnstile_chain lock to protect assigning mutexes to turnstiles.
- Change the turnstile interface to pass back turnstile pointers to the
consumers. This allows us to reduce some locking and makes it easier
to cancel turnstile assignment while the turnstile chain lock is held.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
These functions are intended to be used to drop a lock and then reacquire
it when doing an sleep such as msleep(9). Both functions accept a
'struct lock_object *' as their first parameter. The 'lc_unlock' function
returns an integer that is then passed as the second paramter to the
subsequent 'lc_lock' function. This can be used to communicate state.
For example, sx locks and rwlocks use this to indicate if the lock was
share/read locked vs exclusive/write locked.
Currently, spin mutexes and lockmgr locks do not provide working lc_lock
and lc_unlock functions.
- Properly note when a read lock is released.
- Always note when we contest on a read lock.
- Only note success of obtaining read locks for the first reader to match
the behavior of sx(9).
Reviewed by: kmacy
- Fix missing initialization in kern_rwlock.c causing bogus times to be collected
- Move updates to the lock hash to after the lock is released for spin mutexes,
sleep mutexes, and sx locks
- Add new kernel build option LOCK_PROFILE_FAST - only update lock profiling
statistics when an acquisition is contended. This reduces the overhead of
LOCK_PROFILING to increasing system time by 20%-25% which on
"make -j8 kernel-toolchain" on a dual woodcrest is unmeasurable in terms
of wall-clock time. Contrast this to enabling lock profiling without
LOCK_PROFILE_FAST and I see a 5x-6x slowdown in wall-clock time.
determine if it holds an exclusive rwlock reference or not. This is
non-ideal, but recursion scenarios in the network stack currently
require it.
Approved by: jhb
- only collect timestamps when a lock is contested - this reduces the overhead
of collecting profiles from 20x to 5x
- remove unused function from subr_lock.c
- generalize cnt_hold and cnt_lock statistics to be kept for all locks
- NOTE: rwlock profiling generates invalid statistics (and most likely always has)
someone familiar with that should review
wait (time waited to acquire) and hold times for *all* kernel locks. If
the architecture has a system synchronized TSC, the profiling code will
use that - thereby minimizing profiling overhead. Large chunks of profiling
code have been moved out of line, the overhead measured on the T1 for when
it is compiled in but not enabled is < 1%.
Approved by: scottl (standing in for mentor rwatson)
Reviewed by: des and jhb
a count of all non-spin locks, not just lockmgr locks. This can give us a
much cheaper way to see if we have any locks held (such as when returning
to userland via userret()) without requiring WITNESS.
MFC after: 1 week
locked. In general the adaptive spinning is similar to the same code
for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically,
even though both wait bits might be set and we might have a turnstile with
at least one waiting thread, there might not be any threads blocked on the
queue we are not waking up (they might all be spinning), and we should
only preserve the waiting flag for the queue we aren't waking up if there
are in fact threads blocked on that queue. Secondly, there might not be
any threads blocked on the queue we have chosen to waken threads from
(there might only be threads blocked on the other queue and the threads
for this queue are all spinning) in which case we disown the turnstile
instead of doing a braodcast and unpend.
use it in places that only care about the write owner instead of
rw_owner() as a baby step towards limited read-lock owner.
- Tidy the code that sets the WAITER flag bits to not duplicate a test
around the atomic operation and the KTR trace in both of the lock
functions.
