The man page part of the patch is my fault, the changes to the
periodic script is Dominik's.
PR: 88486
Submitted by: Dominik Brettnacher <domi@saargate.de>
Reviewed by: brian
Approved by: re
MFC after: 1 month
Improvements:
* /etc/rc.suspend,rc.resume are always run, no matter the source of the
suspend request (user or kernel, apm or acpi)
* suspend now requires positive user acknowledgement. If a user program
wants to cancel the suspend, they can. If one of the user programs
hangs or doesn't respond within 10 seconds, the system suspends anyway.
* /dev/apm is clonable, allowing multiple listeners for suspend events.
In the future, xorg-server can use this to be informed about suspend
even if there are other listeners (i.e. apmd).
Changes:
* Two new ACPI ioctls: REQSLPSTATE and ACKSLPSTATE. Request begins the
process of suspending by notifying all listeners. acpi is monitored by
devd(8) and /dev/apm listener(s) are also counted. Users register their
approval or disapproval via Ack. If anyone disapproves, suspend is vetoed.
* Old user programs or kernel modules that used SETSLPSTATE continue to
work. A message is printed once that this interface is deprecated.
* acpiconf gains the -k flag to ack the suspend request. This flag is
undocumented on purpose since it's only used by /etc/rc.suspend. It is
not intended to be a permanent change and will be removed once a better
power API is implemented.
* S5 (power off) is no longer supported via acpiconf -s 5 or apm -z/-Z.
This restores previous behavior of halt/shutdown -p being the interface.
* Miscellaneous improvements to error reporting
Approved by: re
This speeds up registration of packages considerably.
- style(9) police welcome!
PR: bin/112630
Submitted by: Stephen Montgomery-Smith <stephen@cauchy.math.missouri.edu>
Tested by: bento i386 experimental run
MFC after: 14 days
when linear acceleration (-a) was enabled with a <1 value to slow them down.
Previously, rounding errors would eat small movements so the mouse had to be
moved a certain distance to get any movement at all. We now calculate the
rounding errors and take them into account when reporting movement.
PR: bin/113749
Submitted by: Oliver Fromme <olli -at- secnetix.de>
MFC after: 3 days
by unavailable accounts, e.g., those locked, expired, not allowed in at
the moment by nologin(5), or whatever, depending on cron's pam.conf(5).
This applies to personal crontabs only, /etc/crontab is unaffected.
In other words, now the account management policy will apply to
commands scheduled by users via crontab(1) so that a user can no
longer use cron(8) to set up a delayed backdoor and run commands
during periods when the admin doesn't want him to.
The PAM check is done just before running a command, not when loading
a crontab, because accounts can get locked, expired, and re-enabled
any time with no changes to their crontabs. E.g., imagine that you
provide a system with payed access, or better a cluster of such
systems with centralized account management via PAM. When a user
pays for some days of access, you set his expire field respectively.
If the account expires before its owner pays more, its crontab
commands won't run until the next payment is made. Then it'll be
enough to set the expire field in future for the commands to run
again. And so on.
Document this change in the cron(8) manpage, which includes adding
a FILES section and touching the document date.
X-Security: should benefit as users have access to cron(8) by default
- Add and document the KVM and KVM_SUPPORT options that
are needed for the ifmcstats(3) makefile
- Garbage collect unused variables
- Add missing inclusion of bsd.own.mk where needed
Approved by: kan (mentor)
Reviewed by: ru
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
ntpd's "-4" and "-6" options are described in the original documentation
(contrib/ntp/html/ntpd.html). It may be original's doc bug.
PR: docs/112642
Submitted by: Seth Hieronymus<shieronymus@speakeasy.net>
Discussed with: ume
MFC after: 1 week
id used by sysinstall when enabling anonymous FTP.
Change the default group used by sysinstall for setting up anonymous FTP
from operator to ftp; there is no reason to use operator and there are
potential security issues when doing so.
PR: 93284
Approved by: ru (mentor)
Reviewed by: simon
change the way of what ppp submits to the RADIUS server
as NAS-Port-Id. Possible options are: the PID of the process
owning the corresponding interface, tun(4) interface number,
interface index (as it would get returned by if_nametoindex(3)),
or it's possible to keep the default behavior. Check the ppp(8)
manual page for details.
PR: bin/112764
Submitted by: novel (myself)
Reviewed by: flz
Approved by: flz
MFC after: 1 month
this bug and submitted these patches to dunstan@. He sent them to me
to test, and I discovered they were needed for the atmel kernel config
files. Since we were playing with them in the terminal room after the
developer's summit today, I thought I'd go ahead and commit them to
allow those folks that now have atmel hardware (thanks Andre) a chance
to try it out w/o my help. Since dunstan@ is asleep right now, risk
stepping on his toes a little by going ahead and committing this
change.
Submitted by: dunstan@, bde@
Tested by: bde@
operating with the "-b basedir" option would not correctly update files
which had flags set or were hardlinked.
Submitted by: Karsten Schmidt
Pointy hat to: cperciva
MFC after: 1 week
is caused by my latest changes to config(8). You're supposed to install new
config(8) in order to prevent yourself from seeing a warning about old
version of that tool.
You should configure the kernel with a new config(8) then.
Oked by: rwatson, cognet (mentor)
Remember about tricky cases, where options contain unfriendly characters,
from the ANSI-C string point of view ('"' in this case). The x09 build
breakage was caused by SC_CUT_SEPCHARS options.
I did test this patch number of times; each time unprofessionally and
inappropriately.
OKed by: cognet (mentor)
This change will let us to have full configuration of a running kernel
available in sysctl:
sysctl -b kern.conftxt
The same configuration is also contained within the kernel image. It can be
obtained with:
config -x <kernelfile>
Current functionality lets you to quickly recover kernel configuration, by
simply redirecting output from commands presented above and starting kernel
build procedure. "include" statements are also honored, which means options
and devices from included files are also included.
Please note that comments from configuration files are not preserved by
default. In order to preserve them, you can use -C flag for config(8). This
will bring configuration file and included files literally; however,
redirection to a file no longer works directly.
This commit was followed by discussion, that took place on freebsd-current@.
For more details, look here:
http://lists.freebsd.org/pipermail/freebsd-current/2007-March/069994.htmlhttp://lists.freebsd.org/pipermail/freebsd-current/2007-May/071844.html
Development of this patch took place in Perforce, hierarchy:
//depot/user/wkoszek/wkoszek_kconftxt/
Support from: freebsd-current@ (links above)
Reviewed by: imp@
Approved by: imp@
Not because I admit they are technically wrong and not because of bug
reports (I receive nothing). But because I surprisingly meets so
strong opposition and resistance so lost any desire to continue that.
Anyone who interested in POSIX can dig out what changes and how
through cvs diffs.
