Commit Graph

7859 Commits

Author SHA1 Message Date
John Baldwin
034dc442ad - Add the new critical_t type used to save state inside of critical
sections.
- Add implementations of the critical_enter() and critical_exit() functions
  and remove restore_intr() and save_intr().
- Remove the somewhat bogus disable_intr() and enable_intr() functions on
  the alpha as the alpha actually uses a priority level and not simple bit
  flag on the CPU.
2001-03-28 02:31:54 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
David E. O'Brien
06a6074bb0 Fix a problem where we were switching npxproc from underneath processes
running in process context in order to run interrupt handlers.  This
caused a big smashing of the stack on AMD K6, K5 and Intel Pentium (ie, P5)
processors because we are using npxproc as a flag to indicate whether
the state has been pushed onto the stack.

Submitted by:	bde
2001-03-24 08:27:57 +00:00
Thomas Moestl
368d2edce4 Export intrnames and intrcnt as sysctls (hw.nintr, hw.intrnames and
hw.intrcnt).

Approved by:	rwatson
2001-03-23 03:45:17 +00:00
Robert Watson
49993db091 o Two changes made elsewhere relating to recent EA commits, but not
committed to NOTES:
    - s/FFS_EXTATTR/UFS_EXTATTR/
    - add UFS_EXTATTR_AUTOSTART

Submitted by:	bde
2001-03-19 23:27:37 +00:00
Dag-Erling Smørgrav
11b876c98e Axe TCP_RESTRICT_RST. It was never a particularly good idea except for a few
very specific scenarios, and now that we have had net.inet.tcp.blackhole for
quite some time there is really no reason to use it any more.

(first of three commits)
2001-03-19 22:03:11 +00:00
Dag-Erling Smørgrav
a6221d8c82 Show the bzero() bandwidth in kBps instead of Bps; use u_int32_t instead
of long and int64_t; and print the result as an unsigned long. This should
make the output from the bzero() test more readable, and avoid printing a
negative bandwidth. Note that this doesn't change the decision process,
since that is based on time elapsed, not on computed bandwidth.
2001-03-19 00:28:04 +00:00
Peter Wemm
6eb39ac8fc Use a generic implementation of the Fowler/Noll/Vo hash (FNV hash).
Make the name cache hash as well as the nfsnode hash use it.

As a special tweak, create an unsigned version of register_t.  This allows
us to use a special tweak for the 64 bit versions that significantly
speeds up the i386 version (ie: int64 XOR int64 is slower than int64
XOR int32).

The code layout is a little strange for the string function, but I was
able to get between 5 to 10% improvement over the original version I
started with. The layout affects gcc code generation choices and this way
was fastest on x86 and alpha.

Note that 'CPUTYPE=p3' etc makes a fair difference to this.  It is
around 45% faster with -march=pentiumpro on a p6 cpu.
2001-03-17 09:31:06 +00:00
Søren Schmidt
48c1424385 Remove the now defunct ATA_ENABLE* options
Spotted by: phk
2001-03-16 11:52:25 +00:00
Warner Losh
d6f40bb4b7 add cnw driver to notes/lint 2001-03-16 07:29:58 +00:00
Warner Losh
cc60620649 Resync to GENERIC. This backs out the spammage that I committed wrt
killing ipv6 and some other things.

This makes GENERIC and NEWCARD the same, with OLDCARD stuff commented
out and the NEWCARD stuff included.  For the moment, pcic is commented
out (which has a old).  Plus invariants.  Plus ddb.
2001-03-16 06:33:44 +00:00
Peter Wemm
50e2347e68 Kill the 4MB kernel limit dead. [I hope :-)].
For UP, we were using $tmp_stk as a stack from the data section.  If the
kernel text section grew beyond ~3MB, the data section would be pushed
beyond the temporary 4MB P==V mapping.  This would cause the trampoline
up to high memory to fault.  The hack workaround I did was to use all of
the page table pages that we already have while preparing the initial
P==V mapping, instead of just the first one.
For SMP, the AP bootstrap process suffered the same sort of problem and
got the same treatment.

MFC candidate - this breaks on 4.x just the same..

Thanks to:	Richard Todd <rmtodd@ichotolot.servalan.com>
2001-03-15 05:10:06 +00:00
Peter Wemm
02846353f9 Commit some tweaks I have had laying around my tree for over a year now.
Always set the APM "device" description.  Some minor style tweaks.
2001-03-13 05:56:48 +00:00
Jonathan Lemon
4664a8d5eb Move the fxp driver so it is under the miibus section. 2001-03-12 21:51:07 +00:00
Dag-Erling Smørgrav
8f12c20f6c rfork() masks RFSTOPPED out of the flags it passes to fork1(), so we have
to call fork1() directly if we don't want out process queued right away.
This has the serendipitous side effect of saving us a call to pfind().

This makes threaded Linux apps (such as Opera) work again.
2001-03-11 18:52:10 +00:00
Poul-Henning Kamp
e10469fef8 Make md(4) and mdconfig(8) take over the role of vn(4) and vnconfig(8)
entirely as previously advertised.

md(4) adopted all assets of vn(4) some time back and has proper devfs
support and cloning abilities to boot.
2001-03-09 20:09:28 +00:00
John Baldwin
5db078a9be Fix mtx_legal2block. The only time that it is bad to block on a mutex is
if we hold a spin mutex, since we can trivially get into deadlocks if we
start switching out of processes that hold spinlocks.  Checking to see if
interrupts were disabled was a sort of cheap way of doing this since most
of the time interrupts were only disabled when holding a spin lock.  At
least on the i386.  To fix this properly, use a per-process counter
p_spinlocks that counts the number of spin locks currently held, and
instead of checking to see if interrupts are disabled in the witness code,
check to see if we hold any spin locks.  Since child processes always
start up with the sched lock magically held in fork_exit(), we initialize
p_spinlocks to 1 for child processes.  Note that proc0 doesn't go through
fork_exit(), so it starts with no spin locks held.

Consulting from:	cp
2001-03-09 07:24:17 +00:00
John Baldwin
136d8f42b9 Unrevert the pmap_map() changes. They weren't broken on x86.
Sense beaten into me by:	peter
2001-03-07 05:29:21 +00:00
Gregory Sutter
ff5fb8ad24 Spelling and capitalization fixes.
Reviewed by:	gshapiro, jake, jhb, rwatson (all within 30 seconds)
2001-03-07 04:58:38 +00:00
John Baldwin
f227364a17 - Release Giant a bit earlier on syscall exit.
- Don't try to grab Giant before postsig() in userret() as it is no longer
  needed.
- Don't grab Giant before psignal() in ast() but get the proc lock instead.
2001-03-07 03:53:39 +00:00
John Baldwin
19eb87d22a Grab the process lock while calling psignal and before calling psignal. 2001-03-07 03:37:06 +00:00
John Baldwin
ff655691d8 Use the proc lock to protect p_pptr when waking up our parent in cpu_exit()
and remove the mpfixme() message that is now fixed.
2001-03-07 03:20:15 +00:00
John Baldwin
4a01ebd482 Back out the pmap_map() change for now, it isn't completely stable on the
i386.
2001-03-07 01:04:17 +00:00
David Malone
f88eb01140 Spell what was originally "unsigned long" as "unsigned long" again,
to cut down on some compiler warnings caused by lexically mismatched
types.

Reviewed by:	bde
2001-03-06 11:35:04 +00:00
John Baldwin
968950e5d1 - Rework pmap_map() to take advantage of direct-mapped segments on
supported architectures such as the alpha.  This allows us to save
  on kernel virtual address space, TLB entries, and (on the ia64) VHPT
  entries.  pmap_map() now modifies the passed in virtual address on
  architectures that do not support direct-mapped segments to point to
  the next available virtual address.  It also returns the actual
  address that the request was mapped to.
- On the IA64 don't use a special zone of PV entries needed for early
  calls to pmap_kenter() during pmap_init().  This gets us in trouble
  because we end up trying to use the zone allocator before it is
  initialized.  Instead, with the pmap_map() change, the number of needed
  PV entries is small enough that we can get by with a static pool that is
  used until pmap_init() is complete.

Submitted by:		dfr
Debugging help:		peter
Tested by:		me
2001-03-06 06:06:42 +00:00
John Baldwin
6ad0e7c5cc Create clone'd linux processes as stopped processes at first and don't
actually make them runnable until after the emulator layer has had a chance
to perform fixups.
2001-03-06 02:59:46 +00:00
John Baldwin
ae383d0cc7 Don't enable interrupts before calling sched_ithd for threaded interrupts.
Tested by:	obrien
2001-03-05 04:37:54 +00:00
Matt Jacob
0787f2b854 Add some default hints for isp. 2001-03-03 19:39:15 +00:00
Warner Losh
f2fdbb57ca Add support for Dlink DL10022 to the ed driver. This is a mii part
bolted to a ne-2000 chip.  This is necessary for the NetGear FA-410TX
and other cards.

This also requires you add mii to your kernel if you have an ed driver
configured.

This code will result in a couple of timeout messages for ed on the
impacted cards.  Additional work will be needed, but this does work
right now, and many people need these cards.

Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
2001-03-03 08:31:37 +00:00
KATO Takenori
e70db7b576 Merged from sys/i386/include/bus_at386.h revision 1.13. 2001-03-02 08:31:38 +00:00
Mark Murray
5a44842b10 Back out a removal that I was far to quick to apply. The root cause
has been fixed.
2001-03-02 05:57:39 +00:00
Matthew N. Dodd
c7411c02f5 version 1.7 made some changes to correct problems identifed by compiling
with egcs-1.1.1.  bus_space_write_multi_2() had an extra operation that
should have been removed.

Remove it.

This fixes the panic when bus_space_write_multi_2() is used.

Obtained from:		jake
2001-03-02 05:33:53 +00:00
Mark Murray
e962abb355 No longer an option. Config(8) is whining over LINT. 2001-03-01 16:46:39 +00:00
Jonathan Lemon
2b99d4f013 In ascpoll, return revents, not 0. 2001-03-01 03:21:16 +00:00
Matthew Dillon
0cc3ac8b6c Linux does not filesystem-sync file-backed writable mmap pages on
a regular basis.  Adjust our linux emulation to conform.  This will
cause more dirty pages to be left for the pagedaemon to deal with,
but our new low-memory handling code can deal with it.   The linux
way appears to be a trend, and we may very well make MAP_NOSYNC the
default for FreeBSD as well (once we have reasonable sequential
write-behind heuristics for random faults).
(will be MFC'd prior to 4.3 freeze)

Suggested by: Andrew Gallatin
2001-02-28 04:30:27 +00:00
Matt Jacob
cf87044e5e Update NOTES wrt hint for fxp. 2001-02-27 23:02:00 +00:00
Peter Wemm
52bcdc9a38 Add and document the LINPROCFS option, so that we can build linprocfs
(either as a module or in the kernel) after sys/modules/* dies.
2001-02-27 08:11:28 +00:00
Peter Wemm
26086a0366 "Document" the COMPAT_LINUX and IBCS2 ABI emulation support together
rather than in silly places like "VFS Cluster debugging".  People
should really be using COMPAT_LINUX instead of the linux module on
dynamic systems like -current.
2001-02-27 07:39:12 +00:00
Peter Wemm
dae42c1ad6 Make the kernel actually compile and link under a.out, using
gcc -aout -mno-underscores.  The bioscall.s tweak is not an a.out
requirement really, but to work around the bugs in the antique version of
gas that used for a.out.  Makefile hacks are all that is needed to
get an a.out kernel.  There is no telling if it will work though.
This is little more than an academic curiosity anyway since all it is
good for is situations where the boot code is hard wired, eg: rom
bootstraps (such as the gnat box).

GENERIC:
...
size -aout kernel ; chmod 755 kernel
text    data    bss     dec     hex
3051520 368640  198688  3618848 373820
2001-02-25 07:44:39 +00:00
Peter Wemm
5107b058bc Always use the ELF naming after the demise of asnames.h. 2001-02-25 07:23:03 +00:00
Jake Burkholder
02318dac2c Remove the leading underscore from all symbols defined in x86 asm
and used in C or vice versa.  The elf compiler uses the same names
for both.  Remove asnames.h with great prejudice; it has served its
purpose.

Note that this does not affect the ability to generate an aout kernel
due to gcc's -mno-underscores option.

moral support from:	peter, jhb
2001-02-25 06:29:04 +00:00
Peter Wemm
b9e3a5d31f Drop the 'count' from the aha device specs 2001-02-25 05:52:38 +00:00
Jake Burkholder
631d7bf3da - Rename the lcall system call handler from Xsyscall to Xlcall_syscall
to be more like Xint0x80_syscall and less like c function syscall().
- Reduce code duplication between the int0x80 and lcall handlers by
  shuffling the elfags into the right place, saving the sizeof the
  instruction in tf_err and jumping into the common int0x80 code.

Reviewed by:	peter
2001-02-25 02:53:06 +00:00
David E. O'Brien
21a3ee0ead MFS: bring the consistent `compat_3_brand' support into -CURRENT
(the work was first done in the RELENG_4 branch near a release
	 during a MFC to make the code cleaner and more consistent)
2001-02-24 22:20:11 +00:00
John Baldwin
34b15f2a20 Add back in INVARIANT_SUPPORT and expand the comments in NOTES about it
to include the reasoning Eivind justifiably thwapped me over the head with.
2001-02-24 19:03:18 +00:00
Boris Popov
d8589bd5cb Introduce API for sequential reads/writes (build/dissect) of mbuf chains.
Reviewed by:	Ian Dowse <iedowse@maths.tcd.ie>,
		Bosko Milekic <bmilekic@technokratis.com>,
		Julian Elischer <julian@elischer.org> and arch@/net@
Obtained from:	smbfs
2001-02-24 15:44:30 +00:00
Peter Wemm
f1532aadee Activate USER_LDT by default. The new thread libraries are going to
depend on this.  The linux ABI emulator tries to use it for some linux
binaries too.  VM86 had a bigger cost than this and it was made default
a while ago.

Reviewed by:	jhb, imp
2001-02-23 01:25:02 +00:00
John Baldwin
4c8ccdab0f Remove undefined and unreferenced doreti_syscall_ret globl. While I'm
here, adjust comment block above doreti.  We don't have the old MP lock
anymore.
2001-02-23 00:41:05 +00:00
John Baldwin
feb43c5f37 The p_md.md_regs member of proc is used in signal handling to reference
the the original trapframe of the syscall, trap, or interrupt that entered
the kernel.  Before SMPng, ast's were handled via a psuedo trap at the
end of doerti.  With the SMPng commit, ast's were broken out into a
separate ast() function that was called from doreti to match the behavior
of other architectures.  Unfortunately, when this was done, the
p_md.md_regs member of curproc was not updateda in ast(), thus when
signals are handled by userret() after an interrupt that returns to
userland, we end up using a stale trapframe that will result in the
registers from the old trapframe overwriting the real trapframe and
smashing all the registers right before we return to usermode.  The saved
%cs:%eip from where we were in usermode are saved in the trapframe for
example.
2001-02-22 19:35:20 +00:00
John Baldwin
f308e0d714 - Change ast() to take a pointer to a trapframe like other architectures.
- Don't use an atomic operation to update cnt.v_soft in ast().  This is
  the only place the variable is written to, and sched_lock is always
  held when it is written, so it is already protected and the mutex release
  of sched_lock asserts a memory barrier that ensures the value will be
  updated in a timely fashion.
2001-02-22 18:05:15 +00:00