where the type is 32-bit. ZFS can handle 64-bit timestamp internally
but zfs_setattr() would check if the time value can fit, we change the
checking macros to match 64-bit timestamp if the platform supports it.
This change has some downsides like, while you can import zfs on 32-bit
platforms, the timestamp would overflow if they are out of the range.
This fixes the Y2.038K issue on platforms using 64-bit timestamps.
Reviewed by: pjd
MFC after: 1 month
symbols resolving in DDB
- When zeroing .bss/.sbss do not round end address to page boundary,
it's not neccessary and might destroy data pased by trampoline or
boot loader
ifmultiaddr structures' reference to the parent interface, unless the parent
interface is really detaching. While here, program only link layer multicast
filters to a wlan's hardware parent interface.
PR: kern/142391, kern/142392
Reviewed by: sam, rpaolo, bms
MFC after: 1 week
In the current code, the locking is completely broken and may lead
easilly to deadlocks. Fix it by using the proc_mtx, linked to the
suspending thread, as lock for the operation. Keep using the
thread_lock for setting and reading the flag even if it is not entirely
necessary (atomic ops may do it as well, but this way the code is more
readable).
- Fix a deadlock within kthread_suspend().
The suspender should not sleep on a different channel wrt the suspended
thread, or, otherwise, the awaker should wakeup both. Uniform the
interface to what the kproc_* counterparts do (sleeping on the same
channel).
- Change the kthread_suspend_check() prototype.
kthread_suspend_check() always assumes curthread and must only refer to
it, so skip the thread pointer as it may be easilly mistaken.
If curthread is not a kthread, the system will panic.
In collabouration with: jhb
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC: 2 weeks
available for use. All data below this address considered to be used
by kernel. Along with kernel own data it might be symbol tables
prepeared by trampoline code, boot loader service data passed for
further analysis by kernel, etc... By default kernel_kseg0_end points
to the end of loaded kernel.
- Introduce mips_postboot_fixup function. It checks for symbol information
copied by ELF trampoline and passes it to KDB
so on architectures with strict alignment requirements we can't just simply
cast the latter to the former but need to copy it bytewise instead.
PR: 143010
MFC after: 3 days
For PT_TO_SCE stop that stops the ptraced process upon syscall entry,
syscall arguments are collected before ptracestop() is called. As a
consequence, debugger cannot modify syscall or its arguments.
In syscall(), reread syscall number and arguments after ptracestop(),
if debugger modified anything in the process environment. Since procfs
stopevent requires number of syscall arguments in p_xstat, this cannot
be solved by moving stop/trace point before argument fetching.
Move the code to read arguments into separate function
fetch_syscall_args() to avoid code duplication. Note that ktrace point
for modified syscall is intentionally recorded twice, once with original
arguments, and second time with the arguments set by debugger.
PT_TO_SCX stop is executed after cpu_syscall_set_retval() already.
Reviewed by: kib
frontend uses the same uPD7210 backend as the pcii ISA frontend, so
the backend has to cope with both situations.
Also, hide the first printf in pcii_probe (address mismatch) behind
bootverbose as the ISA bus parent tries to probe all configured ISA
devices against each driver, so a the console has been cluttered with
this message for a bunch of unrelated driver probes.
MFC after: 3 days
In the case of the thread being on a sleepqueue or a turnstile, the
sched_lock was acquired (without the aid of the td_lock interface) and
the td_lock was dropped. This was going to break locking rules on other
threads willing to access to the thread (via the td_lock interface) and
modify his flags (allowed as long as the container lock was different
by the one used in sched_switch).
In order to prevent this situation, while sched_lock is acquired there
the td_lock gets blocked. [0]
- Merge the ULE's internal function thread_block_switch() into the global
thread_lock_block() and make the former semantic as the default for
thread_lock_block(). This means that thread_lock_block() will not
disable interrupts when called (and consequently thread_unlock_block()
will not re-enabled them when called). This should be done manually
when necessary.
Note, however, that ULE's thread_unblock_switch() is not reaped
because it does reflect a difference in semantic due in ULE (the
td_lock may not be necessarilly still blocked_lock when calling this).
While asymmetric, it does describe a remarkable difference in semantic
that is good to keep in mind.
[0] Reported by: Kohji Okuno
<okuno dot kohji at jp dot panasonic dot com>
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC: 2 weeks
syscall arguments are collected before ptracestop() is called. As a
consequence, debugger cannot modify syscall or its arguments.
For i386, amd64 and ia32 on amd64 MD syscall(), reread syscall number
and arguments after ptracestop(), if debugger modified anything in the
process environment. Since procfs stopeven requires number of syscall
arguments in p_xstat, this cannot be solved by moving stop/trace point
before argument fetching.
Move the code to read arguments into separate function
fetch_syscall_args() to avoid code duplication. Note that ktrace point
for modified syscall is intentionally recorded twice, once with original
arguments, and second time with the arguments set by debugger.
PT_TO_SCX stop is executed after cpu_syscall_set_retval() already.
Reported by: Ali Polatel <alip exherbo org>
Briefly discussed with: jhb
MFC after: 3 weeks
. Properly allocate all IO space resources. These cards scatter their
IO addresses over a range of 0x1600 bytes, and they require an
additional address for "special interrupt handling".
. Implement the "special interrupt handling" per the GPIB-PCIIA
Technical Reference Manual; this was apparently not declared for the
clone card this driver has been originally implemented for, but it
turned out to be needed for both, an original NI brand PCII/PCIIA
card as well as the Axiom AX5488 clone.
. Add some diagnostic messages for various resource allocation etc.
failures during probe.
. Add some comments about the structure of the IO address space that
is used by these cards.
MFC after: 1 day
o Force the ebase to be 0x80000000 (the base that we're booted with may
need to be respected in the future).
o Initialize the clock early so we can initialize the console early
o use panic where we can now use it.
o Tag some code for parsing the boot records as belonging in the cavium sdk.
o remove support for booting on ancient boards...
# we make it further in bootstrapping now: interrupts being enabled in the
# uarts are now taking us out, it seems, for reasons unknown.
implementation of heartbeat interval was 2 but there was typo which
caused the heartbeat is sent approximately every 5 seconds. This
caused unintended controller reset by firmware because firmware
thought OS was crashed.
Submitted by: Floris Bos < info <> je-eigen-domein dot nl >
Tested by: Andrzej Tobola < ato <> iem dot pw dot edu dot pl >
Basically the msg ring interrupt was being re-enabled
inside a spinlock as the thread set it self up for rescheduling.
This won't work since inside the re-enable is another
spin lock.. which means on return from the reenable
the interrupts have been reenabled. Thus you would
get a clock int and end up panicing holding a spin
lock to long :-o
