activate the traces, set the LD_UTRACE (or LD_32_UTRACE) environment
variable. This also includes code in kdump(8) to parse the traces.
Reviewed by: kan, jdp
MFC after: 2 weeks
human-readable format. Note that we report 'realloc(p, 0)' as 'free(p)'
since both cases are encoded the same way and 'free()' is more common
than a realloc() to 0.
MFC after: 1 week
of a socket() call with sockipprotoname() if the first parameter (domain)
is PF_INET or PF_INET6.
Old parsing behavior before this change:
ping6 CALL socket(PF_INET6,SOCK_RAW,0x3a)
New behavior after this change:
ping6 CALL socket(PF_INET6,SOCK_RAW,IPPROTO_ICMPV6)
of auto_or_type.
The old parsing code would incorrectly decode a socket() call in the
ping6 program as:
CALL socket(PF_PUP|PF_ECMA|PF_APPLETALK|PF_COIP|PF_SIP,SOCK_DGRAM,0)
The new parsing code decodes the same socket() call as:
CALL socket(PF_INET6,SOCK_DGRAM,0)
However, auto_if_type() uses if/else statements in C instead
of a single switch statement, when mapping an integer value to
a #define. For certain cases where multiple #define constants
alias to a single integer value, auto_if_type() makes things easier
to parse than auto_switch_type().
it as an enum.
If an SCTP SOCK_SEQPACKET socket was opened, kdump would display this
wrong output:
socket(PF_INET,SOCK_STREAM|SOCK_RDM|SOCK_SEQPACKET,0x84)
instead of this correct output:
socket(PF_INET,SOCK_SEQPACKET,0x84)
MFC after: 2 weeks
32229 telnet CALL mmap(0,0x8000,0x3,0x1002,0xffffffff,0,0,0)
32229 telnet CALL open(0x2807bc28,0,0x1b6)
32229 telnet CALL socket(0x2,0x2,0)
to
32229 telnet CALL mmap(0,0x8000,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,0xffffffff,0,0,0)
32229 telnet CALL open(0x2807bc28,O_RDONLY,<unused>0x1b6)
32229 telnet CALL socket(PF_INET,SOCK_DGRAM,0)
David wanted to implement the suggestions which came up at the review from
arch@ too, but real life rejected this proposal. So I commit what we already
got and let another volunteer pick the remaining work from the ideas list.
Submitted by: "David Kirchner" <dpk@dpk.net>
Suggested by: FreeBSD ideas list page
Reviewed by: arch
field holding the threadid. This is more useful for libthr than
libpthread, but still quite useful in libpthread as it can be used to
process interlaced records from multiple threads over the course of a
system call.
Detect old ktr_buffer values using the heuristic "if it's negative,
then it must not be a valid threadid". This may leave something to be
desired.
MFC after: 1 month
Reviewed by: davidxu
- sort the -E switch into the right place.
- add previously missing -p pid in usage (from the last few commits).
- add -E to usage.
- consistently use trfile in the man page.
I knew I shouldn't have touched the man page. If I commit to a man page,
it just makes people suspicious. :-)
1) add a "-p pid", which is rather useful for selecting a single pid in
a combined trace file (eg: with ktrace -i).
2) display binary genio data in a more precise format.
KTR_DROP set in its header, then we output an extra line to stdout to
indicate that events were dropped between the previous record and this
record. It is a bit trickier because we need to always notify the user
if events are dropped even if KTR_DROP is set on a record of a type that
we aren't interested in since kdump(8) doesn't know if the dropped events
were of the types that the user has requested. To avoid outputting
multiple events dropped notices in between actual event logs, a state
variable is set whenever a drop is logged and cleared whenever an actual
record is output.
Requested by: phk
1) Define _KERNEL while including sys/time.h to get some function prototypes.
2) Add prototypes and ANSIify definitions.
3) Constness changes.
4) Remove register keyword.
5) Actually return a sensible value from main.
6) Make fread_tail take a void * instead of a char *.
7) Avoid a signedness warning by casting to a size_t. Should be safe
enough 'cos we also check for nonnegativity.
8) Be extra chummy with sigset_t rather than passing a struct to printf
and pretending it is an int.
breakage with ioctl.c. The .depend file should track dependencies
just fine, and the worst we can have is to miss new ioctls.
But I still think it's a good idea to have -DNOCLEAN build produce
the same ioctl.c as it would without -DNOCLEAN.
Prodded for a long time by: bde
Currently, cs_CZ.ISO_8859-2 locale's collation sequence is
broken, and this caused grep(1) to skip some include files.
Reported by: Michal Mertl <mime@traveller.cz>
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
