nsouch
9f6adcd1d8
Move away from lpt.h data structure definition that only lpt.c relies on.
...
Remove if_plip.c dependency to lpt.h.
1999-02-14 16:19:16 +00:00
nsouch
c30e87e63a
Return approriate errors to userland.
1999-02-14 14:36:45 +00:00
des
fe07f48704
Mention that chflags can fail with EOPNOTSUPP.
1999-02-14 13:58:18 +00:00
des
e158dd910e
Ignore errors from chflags. This makes it possible to make installworld
...
with DESTDIR set to an NFS-mounted file system.
1999-02-14 13:56:15 +00:00
nsouch
61e9418dd2
Add -e option and change unit to device access in lptcontrol.8
...
Change unit to device access in lptcontrol.c. Now usage is
lptcontrol -i | -p | -e [-d /dev/lpt?]
1999-02-14 12:23:49 +00:00
brian
58b8c67df8
Describe manual dialing in greater detail.
...
Mention more rfc numbers.
Don't ``.Nm Ppp'' (just use ``.Nm'').
1999-02-14 12:16:41 +00:00
nsouch
27a54e2a9c
Create new lpt manpage with ppbus info and the original lpt info.
...
Fix lp.4 ppbus terminology.
1999-02-14 12:06:16 +00:00
nsouch
ad25a63490
Fix interrupt handling with DMA. Bit nFault was tested in the control reg.
...
instead of the status reg. and check ECP mode before considering nFault.
1999-02-14 12:03:35 +00:00
nsouch
13c212a118
Rename nlpt to lpt.
...
Remove from ppi.c the old depreciated module stuff.
Print info when if_plip can't use interrupts.
1999-02-14 12:00:00 +00:00
ache
c9385fa2e5
use minimum length for strcoll too
1999-02-14 09:44:56 +00:00
jkh
1b84e2b2fe
Use more sensible defaults.
1999-02-14 07:43:07 +00:00
jkh
ca698cf375
rc.conf vars no longer "dirty" by default.
1999-02-14 07:35:27 +00:00
jkh
8869bfb01e
Preserve existing rc.conf contents.
1999-02-14 05:52:57 +00:00
imp
377beeaccb
lpt -> nlpt and ppbus due to Dag's changes.
...
Submitted by: Joseph Koshy <jkoshy@FreeBSD.ORG>
P.S. Forgive the delay on committing this. I've been out of town at
a funeral until just a few minutes ago.
1999-02-14 05:18:35 +00:00
fenner
ea6135da57
Fix .Fx usage.
1999-02-13 21:45:58 +00:00
jkh
2e6248769e
Make sure correct path is set in upgrade.
...
Submitted by: Ruslan Ermilov <ru@ucb.crimea.ua>
1999-02-13 18:49:02 +00:00
nsouch
3195c07540
Fix the date and add an smbus declaration
1999-02-13 18:08:35 +00:00
nsouch
a05e5f3178
Handle correctly iicbus request/release mechanism. Add iicbus allocation
...
to the general purpose i/o iic(4) driver.
1999-02-13 18:01:55 +00:00
nsouch
b54915a02a
Fix smbus allocation and add the alsmb (see alpm(4)) driver.
1999-02-13 17:57:19 +00:00
nsouch
9c9f543854
Add alpm, Acer Aladdin-IV/V/Pro2 Power Management Unit. See alpm(4).
1999-02-13 17:54:32 +00:00
nsouch
4e268b3cf5
Add alpm.c, Aladdin Power Management SMBus support for the SMBus framework.
...
Update pcisupport.c with NALPM and Aladdin USB detection printf.
1999-02-13 17:51:46 +00:00
nsouch
3dd41bd13b
Add pci/alpm.c, Aladdin SMBus driver (alpm(4)).
1999-02-13 17:49:57 +00:00
nsouch
37334c0e41
Add alpm.4, Aladdin Power Management SMBus support for the SMBus framework.
1999-02-13 17:48:41 +00:00
bde
1a7fd044d4
Don't pass PSL_NT to vm86 signal handlers. Some vm86/real mode
...
programs, including msdos, set PSL_NT in probes for old cpu types,
although PSL_NT doesn't do anything useful in vm86 or real mode.
PSL_NT is even less useful in the signal handlers. It just causes
T_TSSFLT faults on return from syscalls made by the handlers.
These faults are fixed up lazily so that Xsyscall() doesn't have
to be slowed down to prevent them. The fault handler recently
started complaining about these faults occurring "with interrupts
disabled". It should not have, but the complaints pointed to this
bug.
PR: 9211
1999-02-13 17:45:15 +00:00
ache
d6fcbb03bc
remove collating optimization - not work with substituted characters
1999-02-13 15:45:30 +00:00
ache
8359a77c52
syntax change: allow symbolic names as substitute first arg
...
use this to substitute <ss>
1999-02-13 14:15:25 +00:00
ache
4ecd2d2e40
syntax change: allow symbolic names as substitute first arg
1999-02-13 14:14:47 +00:00
ache
4124fd16f0
use strcoll() where it is easy to sort german ss and similar properly
1999-02-13 13:05:04 +00:00
kuriyama
8883e5d538
Add "beep" subcommand.
...
Obtained from: PAO3
Reviewed by: -current list
1999-02-13 11:32:01 +00:00
kuriyama
3cc41826ab
Add "beep" ioctl. ( #10 is reserved for PIOCSVIR)
...
Obtained from: PAO3
Reviewed by: -current list
1999-02-13 11:32:00 +00:00
obrien
1cddd21605
Fix ufs mounting support
...
PR: 10044
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
1999-02-13 11:06:20 +00:00
dillon
1ff9917e47
Add -z option to vmstat to dump data from the zone allocator
1999-02-13 09:59:24 +00:00
ache
b1eb7d8272
remove BUGS section, now behaviour is predictable enough
1999-02-13 09:57:58 +00:00
dillon
717990555d
General additional cleanup of VOP API for NFS ops - mainly NFS ignoring
...
the API for freeing up cnp's. This cleanup should not effect nominal
operation one way or the other since NFS VOPs just happen to be called
with flags that match what it actually does to the NAMEI components it
gets. Still, if an NFS error occured, there was probably some memory
leakage of NAMEI components with certain NFS VOP ops.
1999-02-13 09:47:30 +00:00
dillon
39fab1fa0c
Remove XXX comment in regarsd to why NFS doesn't use VOP_ABORT(). NFS
...
is being fixed now.
1999-02-13 08:38:28 +00:00
dillon
ab62b188ab
PR: kern/9970
...
Remove incorrect vput() in nfs_link()
1999-02-13 08:01:59 +00:00
dillon
d443f239de
Clarify more of what VOP_LINK expects.
1999-02-13 07:56:49 +00:00
dillon
f4351f3b6f
Update man page - directory vnode should not be unlocked or released
...
by the VOP routine. The caller does it.
1999-02-13 07:44:14 +00:00
jkh
6580176f8b
Correct various mentions of rc.conf
1999-02-13 05:30:49 +00:00
jkh
d23ad3a794
Update to current state of /etc
1999-02-13 05:18:06 +00:00
brian
7e7d5a25cb
Add some examples of how to throw a window up on your display when
...
the peer demands authentication, and add some more detail to the
example configurations.
This is the first time I've written any TCL, so I'd appreciate it
if someone eyeballed the *-auth stuff and fixed any glaring problems.
1999-02-13 00:59:19 +00:00
ache
28666df735
more words about return value
1999-02-13 00:04:54 +00:00
ache
ae6996c0c9
re-phrase things a bit
1999-02-12 23:52:29 +00:00
ache
fa61c225af
fix wrong return result
...
fix n=0 case
improve manpage
1999-02-12 23:40:41 +00:00
ache
652b6fba36
substitute ss
...
Submitted by: "D. Rock" <rock@cs.uni-sb.de>
1999-02-12 21:14:41 +00:00
ache
c655d5380b
add more checks for substitution
...
dissalow substituted character be ordered
1999-02-12 20:56:49 +00:00
dillon
4a860f50cc
jkh accidently removed rc.diskless1 & 2, then put rc.diskless back when
...
he moved rc.conf. Then he deleted rc.diskless when it ( of course ) didn't
work. Now I'm putting the originally accidently removed rc.diskless{1,2}
back in.
1999-02-12 20:51:38 +00:00
dillon
aadfe1d833
Minor optimization to madvise() MADV_FREE to make page as freeable as
...
possible without actually unmapping it from the process.
As of now, I declare madvise() on OBJT_DEFAULT/OBJT_SWAP objects to be
'working and complete'.
1999-02-12 20:42:19 +00:00
ache
1c697612c0
fix English
...
detect recursive substitutions
allow substituted character not present in the order
1999-02-12 20:39:06 +00:00
abial
35ae892d35
Merge from RELENG_3.
1999-02-12 20:36:13 +00:00