expected to return the data in the memory location pointed at by target
after the operation. The FreeBSD atomic functions previously used return
either 0 or 1 to indicate if the comparison succeeded or not respectively.
With this change these functions only support ARMv6 and later are supported
by these functions.
Sponsored by: ABT Systems Ltd
dtrace is able to display a stack trace similar to the one below.
# dtrace -p 603 -n 'tcp:kernel::receive { stack(); }'
0 70 :receive
kernel`ip_input+0x140
kernel`netisr_dispatch_src+0xb8
kernel`ether_demux+0x1c4
kernel`ether_nh_input+0x3a8
kernel`netisr_dispatch_src+0xb8
kernel`ether_input+0x60
kernel`cpsw_intr_rx+0xac
kernel`intr_event_execute_handlers+0x128
kernel`ithread_loop+0xb4
kernel`fork_exit+0x84
kernel`swi_exit
kernel`swi_exit
Tested by: gnn
Sponsored by: ABT Systems Ltd
Since the upstream for cddl code is now illumos not sun, mechanically
convert all sun #ifdef's to illumos #ifdef's which have been used in all
newer code for some time.
Also do a manual pass to correct the use if #ifdef comments as per style(9)
as well as few uses of #if defined(__FreeBSD__) vs #ifndef illumos.
MFC after: 1 month
Sponsored by: Multiplay
It's redundant at the moment since it can be obtained from the trapframe
on the architectures where DTrace is supported, but this won't be the case
with ARM.
In the old days callout(9) had 1 tick precision and that was inadequate
for some uses, e.g. DTrace profile module, so we had to emulate cyclic
API and behavior. Now we can directly use callout(9) in the very few
places where cyclic was used.
Differential Revision: https://reviews.freebsd.org/D1161
Reviewed by: gnn, jhb, markj
MFC after: 2 weeks
* Use a constant to define the number of stack frames in a probe exception.
* Only allow function symbols in powerpc64 ('.' prefixed)
* Set the fbtp_roffset for return probes, so the correct dtrace_probe call is
made.
MFC after: 1 week
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Summary:
Fix the stack tracing for dtrace/powerpc by using the trapexit/asttrapexit
return address sentinels instead of checking within the kernel address space.
As part of this, I had to add new inline functions. FBT traces the kernel, so
we have to have special case handling for this, since a trap will create a full
new trap frame, and there's no way to pass around the 'real' stack. I handle
this by special-casing 'aframes == 0' with the trap frame. If aframes counts
out to the trap frame, then assume we're looking for the full kernel trap frame,
so switch to the real stack pointer.
Test Plan: Tested on powerpc64
Reviewers: rpaulo, markj, nwhitehorn
Reviewed By: markj, nwhitehorn
Differential Revision: https://reviews.freebsd.org/D788
MFC after: 3 week
Relnotes: Yes
tracepoints would continue to generate traps, which would be ignored but
could consume noticeable amounts of CPU if, say, all functions in the kernel
were instrumented.
X-MFC-With: r270067
duplicating the entire implementation for both x86 and powerpc. This makes
it easier to add support for other architectures and has no functional
impact.
Phabric: D613
Reviewed by: gnn, jhibbits, rpaulo
Tested by: jhibbits (powerpc)
MFC after: 2 weeks
the upstream implementation and helps ensure that a trap induced by tracing
fbt::trap:entry is handled without recursively generating another trap.
This makes it possible to run most (but not all) of the DTrace tests under
common/safety/ without triggering a kernel panic.
Submitted by: Anton Rang <anton.rang@isilon.com> (original version)
Phabric: D95
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
2915 DTrace in a zone should see "cpu", "curpsinfo", et al
2916 DTrace in a zone should be able to access fds[]
2917 DTrace in a zone should have limited provider access
MFC after: 2 weeks
usage from dtrace. The dtrace code already uses cdevpriv(9) since FreeBSD
8, so this change should be quite harmless.
Reviewed by: markj
Approved by: markj
MFC after: never
the 4 byte-aligned dtrace_invop_callsite can be found and that it
immediately follows the call to dtrace_invop(). Secondly, fix some pointer
arithmetic to account for differences between struct i386_frame and illumos'
struct frame. Finally, ensure that dtrace_getarg() isn't inlined. It works
by following a fixed number of frame pointers to the probe site, so inlining
breaks it.
MFC after: 3 weeks
first five for probes entered through a UD fault (i.e. FBT probes).
Specifically, handle the fact that dtrace_invop_callsite must be
16 byte-aligned and thus may not immediately follow the call to
dtrace_invop() in dtrace_invop_start(). Also fetch register arguments and
the stack pointer through a struct trapframe instead of a struct reg.
PR: 191260
Submitted by: luke.tw@gmail.com
MFC after: 3 weeks
defined. This ensures that the sdt:zfs:: probes appear despite the fact
the sdt provider is defined in the kernel rather than in zfs.ko.
Reported by: hiren
Tested by: hiren
MFC after: 2 weeks
This includes decodes of recent Intel instructions, in particular
VT-x and related instructions. This allows the FBT provider to
locate the exit points of routines that include these new
instructions.
Illumos issues:
3414 Need a new word of AT_SUN_HWCAP bits
3415 Add isainfo support for f16c and rdrand
3416 Need disassembler support for rdrand and f16c
3413 isainfo -v overflows 80 columns
3417 mdb disassembler confuses rdtscp for invlpg
1518 dis should support AMD SVM/AMD-V/Pacifica instructions
1096 i386 disassembler should understand complex nops
1362 add kvmstat for monitoring of KVM statistics
1363 add vmregs[] variable to DTrace
1364 need disassembler support for VMX instructions
1365 mdb needs 16-bit disassembler support
This corresponds to Illumos-gate (github) version
eb23829ff08a873c612ac45d191d559394b4b408
Reviewed by: markj
MFC after: 1 week
sites and installing a hook at the kernel's trap handler. The fasttrap code
will emulate the overwritten instruction in some common cases, but otherwise
copies it out into some scratch space in the traced process' address space
and ensures that it's executed after returning from the trap.
In Solaris and illumos, this (per-thread) scratch space comes from some
reserved space in TLS, accessible via the fs segment register. This
approach is somewhat unappealing on FreeBSD since it would require some
modifications to rtld and jemalloc (for static TLS) to ensure that TLS is
executable, and would thus introduce dependencies on their implementation
details. I think it would also be impossible to safely trace static binaries
compiled without these modifications.
This change implements the functionality in a different way, by having
fasttrap map pages into the target process' address space on demand. Each
page is divided into 64-byte chunks for use by individual threads, and
fasttrap's process descriptor struct has been extended to keep track of
any scratch space allocated for the corresponding process.
With this change it's possible to trace all libc functions in a program,
e.g. with
pid$target:libc.so.*::entry {@[probefunc] = count();}
Previously this would generally cause the victim process to crash, as
tracing memcpy on amd64 requires the functionality described above.
Tested by: Prashanth Kumar <pra_udupi@yahoo.co.in> (earlier version)
MFC after: 6 weeks
that this is done for SDT probes. This fixes the syscall/tst.args.d test,
which was failing because mmap(2)'s sixth argument wasn't available to the
probe.
MFC after: 2 weeks
aggregation IDs, as is done in the upstream illumos code. This still
requires some FreeBSD-specific code, as our vmem API is not identical to the
one in illumos.
Submitted by: Mike Ma <mikemandarine@gmail.com>
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
corresponding x86 trap type. Userland DTrace probes are currently handled
by the other fasttrap hooks (dtrace_pid_probe_ptr and
dtrace_return_probe_ptr).
Discussed with: rpaulo
* Remove the unused sdt cdev.
* Don't bother keeping a list of probes in struct sdt_prov; it's not needed.
* Invoke sdt_load and sdt_unload from the module handler instead of
registering separate SYSINITs.
* Keep to within 80 columns.
* Check for errors from dtrace_unregister().
the register based on the argument index rather than relying on the fields
in struct reg to be in the right order. This assumption is incorrect on
FreeBSD and generally led to bogus argument values for the sixth argument
of PID and USDT probes; the first five are passed directly to dtrace_probe()
via the fasttrap trap handler and so were correctly handled.
MFC after: 2 weeks
null-separated strings to a single string. This can be used to print the
full arguments of a process using execsnoop (from the DTrace toolkit) or
with the following one-liner:
dtrace -n 'syscall::execve:return {trace(curpsinfo->pr_psargs);}'
Note that this relies on the process arguments being cached via the struct
proc, which means that it will not work for argvs longer than
kern.ps_arg_cache_limit. However, the following rather non-portable
script can be used to extract any argv at exec time:
fbt::kern_execve:entry
{
printf("%s", memstr(args[1]->begin_argv, ' ',
args[1]->begin_envv - args[1]->begin_argv));
}
The debug.dtrace.memstr_max sysctl limits the maximum argument size to
memstr(). Thanks to Brendan Gregg for helpful comments on freebsd-dtrace.
Tested by: Fabian Keil (earlier version)
MFC after: 2 weeks
handlers rather than in the dtrace device open/close methods. The current
approach can cause a panic if the device is closed which the taskqueue
thread is active, or if a kernel module containing a provider is unloaded
while retained enablings are present and the dtrace device isn't opened.
Submitted by: gibbs (original version)
Reviewed by: gibbs
Approved by: re (glebius)
MFC after: 2 weeks
dev_ref() in the clone handlers that still use it.
- Don't set SI_CHEAPCLONE flag, it's not used anywhere neither in devfs
(for anything real)
Reviewed by: kib
