On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
On the 4/4 i386, copyout(9) may need to call pmap_extract_and_hold()
on arbitrary userspace mapping. If the mapping is backed by the
non-managed cdev pager or by the sg pager, on dense configs we might
access arbitrary element of vm_page_array[], in particular, not
corresponding to a page from the memory segment. Initialize such pages
as fictitious with the corresponding physical address.
Reported by: bde
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16085
that it does not cause rapid fragmentation of the free physical memory.
Reviewed by: jeff, markj (an earlier version)
Differential Revision: https://reviews.freebsd.org/D15976
The value of m->queue must be cached after comparing it with PQ_NONE,
since it may be concurrently changing.
Reported by: glebius
Reviewed by: jeff
Differential Revision: https://reviews.freebsd.org/D15462
With r332974, when performing a synchronized access of a page's "queue"
field, one must first check whether the page is logically dequeued. If
so, then the page lock does not prevent the page from being removed
from its page queue. Intoduce vm_page_queue(), which returns the page's
logical queue index. In some cases, direct access to the "queue" field
is still required, but such accesses should be confined to sys/vm.
Reported and tested by: pho
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15280
Currently both the page lock and a page queue lock must be held in
order to enqueue, dequeue or requeue a page in a given page queue.
The queue locks are a scalability bottleneck in many workloads. This
change reduces page queue lock contention by batching queue operations.
To detangle the page and page queue locks, per-CPU batch queues are
used to reference pages with pending queue operations. The requested
operation is encoded in the page's aflags field with the page lock
held, after which the page is enqueued for a deferred batch operation.
Page queue scans are similarly optimized to minimize the amount of
work performed with a page queue lock held.
Reviewed by: kib, jeff (previous versions)
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14893
They were previously initialized by the corresponding page daemon
threads, but for vmd_inacthead this may be too late if
vm_page_deactivate_noreuse() is called during boot.
Reported and tested by: cperciva
Reviewed by: alc, kib
MFC after: 1 week
Pages allocated from a given reservation may belong to different
objects. It is therefore possible for vm_page_ps_test() to be called
with the base page's object unlocked. Check for this case before
asserting that the object lock is held.
Reported by: jhb
Reviewed by: kib
MFC after: 1 week
SKZ63 Processor May Hang When Executing Code In an HLE Transaction
Region
Problem: Under certain conditions, if the processor acquires an HLE
(Hardware Lock Elision) lock via the XACQUIRE instruction in the Host
Physical Address range between 40000000H and 403FFFFFH, it may hang
with an internal timeout error (MCACOD 0400H) logged into
IA32_MCi_STATUS.
Move the pages from the range into the blacklist. Add a tunable to
not waste 4M if local DoS is not the issue.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15001
per-cpu alloc and free of pages. The cache is filled with as few trips
to the phys allocator as possible by the use of a new
vm_phys_alloc_npages() function which allocates as many as N pages.
This code was originally by markj with the import function rewritten by
me.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14905
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
vmd_free_count with atomics.
This allows us to allocate and free from reservations without the free lock
except where a superpage is allocated from the physical layer, which is
roughly 1/512 of the operations on amd64.
Use the counter api to eliminate cache conention on counters.
Reviewed by: markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14707
In many cases the page is not enqueued so the change will have no
effect. However, the change is needed to support an optimization in
the fault handler and in some cases (sendfile, the buffer cache) it
was being emulated by the caller anyway.
Reviewed by: alc
Tested by: pho
MFC after: 2 weeks
X-Differential Revision: https://reviews.freebsd.org/D14625
The new page does not belong to a VM object, but the page daemon does
not expect to encounter such pages.
Reviewed by: alc, kib
Tested by: pho
MFC after: 1 week
X-Differential Revision: https://reviews.freebsd.org/D14625
vmd_free_count manipulation. Reduce the scope of the free lock by
using a pageout lock to synchronize sleep and wakeup. Only trigger
the pageout daemon on transitions between states. Drive all wakeup
operations directly as side-effects from freeing memory rather than
requiring an additional function call.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14612
There, the pages freed might be managed but the page's lock is not
owned. For KPI correctness, the page lock is requried around the call
to vm_page_free_prep(), which is asserted. Reclaim loop already did
the work which could be done by vm_page_free_prep(), so the lock is
not needed and the only consequence of not owning it is the assert
trigger.
Instead of adding the locking to satisfy the assert, revert to the
code that calls vm_page_free_phys() directly.
Reported by: pho
Discussed with: jeff
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
After r328977, a wired page m may have m->queue != PQ_NONE.
Reviewed by: kib
X-MFC with: r328977
Differential Revision: https://reviews.freebsd.org/D14485
use it to regulate page daemon output.
This provides much smoother and more responsive page daemon output, anticipating
demand and avoiding pageout stalls by increasing the number of pages to match
the workload. This is a reimplementation of work done by myself and mlaier at
Isilon.
Reviewed by: bsdimp
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14402
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
size of UMA zone allocation is greater than page size. In this case zone
of zones can not use UMA_MD_SMALL_ALLOC, and we need to postpone switch
off of this zone from startup_alloc() until full launch of VM.
o Always supply number of VM zones to uma_startup_count(). On machines
with UMA_MD_SMALL_ALLOC ignore it completely, unless zsize goes over
a page. In the latter case account VM zones for number of allocations
from the zone of zones.
o Rewrite startup_alloc() so that it will immediately switch off from
itself any zone that is already capable of running real alloc.
In worst case scenario we may leak a single page here. See comment
in uma_startup_count().
o Hardcode call to uma_startup2() into vm_mem_init(). Otherwise some
extra SYSINITs, e.g. vm_page_init() may sneak in before.
o While here, remove uma_boot_pages_mtx. With recent changes to boot
pages calculation, we are guaranteed to use all of the boot_pages
in the early single threaded stage.
Reported & tested by: mav
o Most of startup zones have struct uma_slab embedded into the slab,
so provide macro UMA_SLAB_SPACE and use it instead of UMA_SLAB_SIZE,
when calculating how many pages would certain kind of allocations
require. Some zones are offpage, so we might have a positive inaccuracy.
o The keg for the zone of zones is allocated "dynamically", so we
need +1 when calculating amount of pages for kegs. [1]
o The zones of zones and zones of kegs have arbitrary alignment of 32,
and this also needs to be accounted for. [2]
While here, spread more comments and improve diagnostic messages.
Reported by: pho [1], jtl [2]
Previously, wiring a page would cause it to be removed from its page
queue. In the common case, unwiring causes it to be enqueued at the tail
of that page queue. This change modifies vm_page_wire() to not dequeue
the page, thus avoiding the highly contended page queue locks. Instead,
vm_page_unwire() takes care of requeuing the page as a single operation,
and the page daemon dequeues wired pages as they are encountered during
a queue scan to avoid needlessly revisiting them later. For pages in
PQ_ACTIVE we do even better, since a requeue is unnecessary.
The change improves scalability for some common workloads. For instance,
threads wiring pages into the buffer cache no longer need to modify
global page queues, and unwiring is usually done by the bufspace thread,
so concurrency is not as much of an issue. As another example, many
sysctl handlers wire the output buffer to avoid faults on copyout, and
since the buffer is likely to be in PQ_ACTIVE, we now entirely avoid
modifying the page queue in this case.
The change also adds a block comment describing some properties of
struct vm_page's reference counters, and the busy lock.
Reviewed by: jeff
Discussed with: alc, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D11943
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
o Call uma_startup1() after initializing kmem, vmem and domains.
o Include 8 eight VM startup pages into uma_startup_count() calculation.
o Account for vmem_startup() and vm_map_startup() preallocating pages.
o Account for extra two allocations done by kmem_init() and vmem_create().
o Hardcode the place of execution of vm_radix_reserve_kva(). Using SYSINIT
allowed several other SYSINITs to sneak in before it, thus bumping
requirement for amount of boot pages.
for UMA startup.
o Introduce another stage of UMA startup, which is entered after
vm_page_startup() finishes. After this stage we don't yet enable buckets,
but we can ask VM for pages. Rename stages to meaningful names while here.
New list of stages: BOOT_COLD, BOOT_STRAPPED, BOOT_PAGEALLOC, BOOT_BUCKETS,
BOOT_RUNNING.
Enabling page alloc earlier allows us to dramatically reduce number of
boot pages required. What is more important number of zones becomes
consistent across different machines, as no MD allocations are done before
the BOOT_PAGEALLOC stage. Now only UMA internal zones actually need to use
startup_alloc(), however that may change, so vm_page_startup() provides
its need for early zones as argument.
o Introduce uma_startup_count() function, to avoid code duplication. The
functions calculates sizes of zones zone and kegs zone, and calculates how
many pages UMA will need to bootstrap.
It counts not only of zone structures, but also of kegs, slabs and hashes.
o Hide uma_startup_foo() declarations from public file.
o Provide several DIAGNOSTIC printfs on boot_pages usage.
o Bugfix: when calculating zone of zones size use (mp_maxid + 1) instead of
mp_ncpus. Use resulting number not only in the size argument to zone_ctor()
but also as args.size.
Reviewed by: imp, gallatin (earlier version)
Differential Revision: https://reviews.freebsd.org/D14054
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Both issues caused the page daemon to erroneously go to sleep when
applications are consuming free pages at a high rate, leaving the
application threads blocked in VM_WAIT.
1) After completing an inactive queue scan, concurrent allocations may
have prevented the page daemon from meeting the v_free_min threshold.
In this case, the page daemon was going to sleep even when the
inactive queue contained plenty of clean pages.
2) pagedaemon_wakeup() may be called without the free queues lock held.
This can lead to a lost wakeup if a call occurs after the page daemon
clears vm_pageout_wanted but before going to sleep.
Fix 1) by ensuring that we start a new inactive queue scan immediately
if v_free_count < v_free_min after a prior scan.
Fix 2) by adding a new subroutine, pagedaemon_wait(), called from
vm_wait() and vm_waitpfault(). It wakes up the page daemon if either
vm_pages_needed or vm_pageout_wanted is false, and atomically sleeps
on v_free_count.
Reported by: jeff
Reviewed by: alc
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13424
Commit r326346 moved domain iterators from physical layer to vm_page one,
but it also removed translation of freelist to flind for
vm_page_alloc_freelist() call. Before it expects VM_FREELIST_ parameter,
but after it expect freelist index.
On small WiFi boxes with few megabytes of RAM, there is only one freelist
VM_FREELIST_LOWMEM (1) and there is no VM_FREELIST_DEFAULT(0) (see file
sys/mips/include/vmparam.h). It results in freelist 1 with flind 0.
At first, this commit renames flind to freelist in vm_page_alloc_freelist
to avoid misunderstanding about input parameters. Then on physical layer it
restores translation for correct handling of freelist parameter.
Reported by: landonf
Reviewed by: jeff
Differential Revision: https://reviews.freebsd.org/D13351
This gives a marginal improvement in the vm_page_array initialization
time. Also garbage-collect the now-unused vm_phys_paddr_to_segind().
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13270
Some drm2 drivers will set PG_FICTITIOUS in physical pages in order to
satisfy the OBJT_MGTDEVICE object interface, so a scan may encounter
fictitous pages. For now, allow for this possibility; such pages will be
skipped later in the scan since they are wired.
Reported by: avg
Reviewed by: kib
MFC after: 1 week
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
A fictitious page is always wired, so there is no point in trying to
remove one from the page queues.
Completely remove one inaccurate comment from vm_page_free_prep() and
correct another.
Reviewed by: kib, markj
MFC after: 1 week
This catches some rare mysterious failures at the source. The check
is only performed on architectures which implement direct map, and
only enabled with option DIAGNOSTIC, similar to other costly
consistency checks.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The variable is modified with the highly contended page free queue lock.
It unnecessarily shares a cacheline with purely read-only fields and is
re-read after the lock is dropped in the page allocation code making the
hold time longer.
Pad the variable just like the others and store the value as found with
the lock held instead of re-reading.
Provides a modest 1%-ish speed up in concurrent page faults.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D12665
vm_page_try_to_free() is testing conditions, like clean versus dirty,
that only vary in managed pages.
Suggested by: kib
Reviewed by: markj
X-MFC after: never
