kernels exposed by the recent fixes to resource limits for 32-bit processes
on 64-bit kernels:
- Let ABIs expose their maximum stack size via a new pointer in sysentvec
and use that in preference to maxssiz during exec() rather than always
using maxssiz for all processses.
- Apply the ABI's limit fixup to the previous stack size when adjusting
RLIMIT_STACK to determine if the existing mapping for the stack needs to
be grown or shrunk (as well as how much it should be grown or shrunk).
Approved by: re (kensmith)
during execve() when turning off tracing due to executing a setuid binary
as non-root. Previously this could fail to acquire Giant and fail an
assertion if the ktrace file was on a non-MPSAFE filesystem and the
executable was on an MPSAFE filesystem.
MFC after: 3 days
Reported by: kris
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
Change the VOP_OPEN(), vn_open() vnode operation and d_fdopen() cdev operation
argument from being file descriptor index into the pointer to struct file.
Proposed and reviewed by: jhb
Reviewed by: daichi (unionfs)
Approved by: re (kensmith)
processes under 64-bit kernels). Previously, each 32-bit process overwrote
its resource limits at exec() time. The problem with this approach is that
the new limits affect all child processes of the 32-bit process, including
if the child process forks and execs a 64-bit process. To fix this, don't
ovewrite the resource limits during exec(). Instead, sv_fixlimits() is
now replaced with a different function sv_fixlimit() which asks the ABI to
sanitize a single resource limit. We then use this when querying and
setting resource limits. Thus, if a 32-bit process sets a limit, then
that new limit will be inherited by future children. However, if the
32-bit process doesn't change a limit, then a future 64-bit child will
see the "full" 64-bit limit rather than the 32-bit limit.
MFC is tentative since it will break the ABI of old linux.ko modules (no
other modules are affected).
MFC after: 1 week
- Remove also "MP SAFE" after prior "MPSAFE" pass. (suggested by bde)
- Remove extra blank lines in some cases.
- Add extra blank lines in some cases.
- Remove no-op comments consisting solely of the function name, the word
"syscall", or the system call name.
- Add punctuation.
- Re-wrap some comments.
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
Add the argument auditing functions for argv and env.
Add kernel-specific versions of the tokenizer functions for the
arg and env represented as a char array.
Implement the AUDIT_ARGV and AUDIT_ARGE audit policy commands to
enable/disable argv/env auditing.
Call the argument auditing from the exec system calls.
Obtained from: TrustedBSD Project
Approved by: rwatson (mentor)
image_params arg.
- Change struct image_params to include struct sysentvec pointer and
initialize it.
- Change all consumers of process_exit/process_exec eventhandlers to
new prototypes (includes splitting up into distinct exec/exit functions).
- Add eventhandler to userret.
Sponsored by: Google SoC 2006
Submitted by: rdivacky
Parts suggested by: jhb (on hackers@)
the callers if the exec either succeeds or fails early.
- Move the code to call exit1() if the exec fails after the vmspace is
gone to the bottom of kern_execve() to cut down on some code duplication.
both proc pointer and thread pointer, if thread pointer is NULL,
tdsignal automatically finds a thread, otherwise it sends signal
to given thread.
Add utility function psignal_event to send a realtime sigevent
to a process according to the delivery requirement specified in
struct sigevent.
clock are supported. I have plan to merge XSI timer ITIMER_REAL and other
two CPU timers into the new code, current three slots are available for
the XSI timers.
The SIGEV_THREAD notification type is not supported yet because our
sigevent struct lacks of two member fields:
sigev_notify_function
sigev_notify_attributes
I have found the sigevent is used in AIO, so I won't add the two members
unless the AIO code is adjusted.
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
possible for do_execve() to call exit1() rather than returning. As a
result, the sequence "allocate memory; call kern_execve; free memory"
can end up leaking memory.
This commit documents this astonishing behaviour and adds a call to
exec_free_args() before the exit1() call in do_execve(). Since all
the users of kern_execve() in the tree use exec_free_args() to free
the command-line arguments after kern_execve() returns, this should
be safe, and it fixes the memory leak which can otherwise occur.
Submitted by: Peter Holm
MFC after: 3 days
Security: Local denial of service
to avoid touching pageable memory while holding a mutex.
Simplify argument list replacement logic.
PR: kern/84935
Submitted by: "Antoine Pelisse" apelisse AT gmail.com (in a different form)
MFC after: 3 days
- pmcstat(8) gprof output mode fixes:
lib/libpmc/pmclog.{c,h}, sys/sys/pmclog.h:
+ Add a 'is_usermode' field to the PMCLOG_PCSAMPLE event
+ Add an 'entryaddr' field to the PMCLOG_PROCEXEC event,
so that pmcstat(8) can determine where the runtime loader
/libexec/ld-elf.so.1 is getting loaded.
sys/kern/kern_exec.c:
+ Use a local struct to group the entry address of the image being
exec()'ed and the process credential changed flag to the exec
handling hook inside hwpmc(4).
usr.sbin/pmcstat/*:
+ Support "-k kernelpath", "-D sampledir".
+ Implement the ELF bits of 'gmon.out' profile generation in a new
file "pmcstat_log.c". Move all log related functions to this
file.
+ Move local definitions and prototypes to "pmcstat.h"
- Other bug fixes:
+ lib/libpmc/pmclog.c: correctly handle EOF in pmclog_read().
+ sys/dev/hwpmc_mod.c: unconditionally log a PROCEXIT event to all
attached PMCs when a process exits.
+ sys/sys/pmc.h: correct a function prototype.
+ Improve usage checks in pmcstat(8).
Approved by: re (blanket hwpmc)
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.
file's access time should be updated when it gets executed. A while
ago the mechanism used to exec was changed to use a more mmap based
mechanism and this behavior was broken as a side-effect of that.
A new vnode flag is added that gets set when the file gets executed,
and the VOP_SETATTR() vnode operation gets called. The underlying
filesystem is expected to handle it based on its own semantics, some
filesystems don't support access time at all. Those that do should
handle it in a way that does not block, does not generate I/O if possible,
etc. In particular vn_start_write() has not been called. The UFS code
handles it the same way as it would normally handle the access time if
a file was read - the IN_ACCESS flag gets set in the inode but no other
action happens at this point. The actual time update will happen later
during a sync (which handles all the necessary locking).
Got me into this: cperciva
Discussed with: a lot with bde, a little with kan
Showed patches to: phk, jeffr, standards@, arch@
Minor discussion on: arch@
PAGE_SIZE.
Unlike originator of the PR suggests retain MAXSHELLCMDLEN definition
(he has been proposing to replace it with PAGE_SIZE everywhere), not only
this reduced the diff significantly, but prevents code obfuscation and also
allows to increase/decrease this parameter easily if needed.
PR: kern/64196
Submitted by: Magnus Bäckström <b@etek.chalmers.se>
copies arguments into the kernel space and one that operates
completely in the kernel space;
o use kernel-only version of execve(2) to kill another stackgap in
linuxlator/i386.
Obtained from: DragonFlyBSD (partially)
MFC after: 2 weeks
for ensuring that a process' filedesc is not shared with anybody.
Use it in the two places which previously had private implmentations.
This collects all fd_refcnt handling in kern_descrip.c
Use this in all the places where sleeping with the lock held is not
an issue.
The distinction will become significant once we finalize the exact
lock-type to use for this kind of case.
