Commit Graph

1916 Commits

Author SHA1 Message Date
kato
0539734ce1 Another(better) way to support Access/NOTE N98(PC-98) without any effects
for other Access/PC series.

Submitted by:	Chiharu Shibata <chi@bd.mbn.or.jp>
1998-12-31 03:21:14 +00:00
yokota
5a32103859 Make the VESA KLD module work! 1998-12-30 11:21:08 +00:00
hoek
5e720f3594 Silence -Wtrigraph.
Submitted by:	Bradley Dunn <bradley@dunn.org>  (pr: kern/8817)
1998-12-30 00:37:44 +00:00
mjacob
5c42627795 clarify headers;ansify 1998-12-28 19:24:23 +00:00
mjacob
13ecc0c78f clarify headers;move uninit to outer layer;remove watchdog 1998-12-28 19:22:27 +00:00
nsouch
e6c7b35780 Rename smbtx to intsmb (IntelSMB interface), the future PIIX4 SMBus
interface driver.
1998-12-28 19:07:51 +00:00
peter
9a3d9ee577 Some relatively minor tweaks to enable vinum to be built into a static
kernel as a pseudo-device.  The changes were:
- #ifdef DEBUG -> #ifdef VINUMDEBUG
- opt_vinum.h for holding above config variable
- Fixing up a few stray problems where DEBUG wasn't optional.
- config.c -> vinumconfig.c (there's already a config.o)
- Other *.c -> vinum*.c (wasn't strictly necessary, but done in case we end
  up with something else conflicting later on and we might have to have yet
  more repository copies of files).
- include file paths fixups..  (ie: get them all from the kernel tree
  instead of partly from the kernel and partly from /usr/include/machine)

I've spoken with Greg about this..  I hope this doesn't mess him around
too much..
1998-12-28 16:28:24 +00:00
des
7578fd53e0 One more for the road: Chuck the friendly floating daemon. Requires
VESA_800x600 to run.
1998-12-28 14:22:57 +00:00
des
4fe2aa5f70 Save the palette in case syscons doesn't restore it properly.
Fix a minor overflow.
1998-12-28 14:20:13 +00:00
peter
952f5278a3 If I've done this right, revive the vinum code in it's now home after it
was savaged in the blood bath a few hours ago.
1998-12-28 04:56:24 +00:00
des
3b7e907f02 Finally give FreeBSD a graphical screensaver. It isn't much, but it works,
and can serve as a template for further efforts. Consider this my (belated)
Christmas present to the Project :)

Requested by:	jkh
1998-12-27 22:03:09 +00:00
sos
0775b4a219 Remove LKM's depricated by modules. 1998-12-27 19:38:15 +00:00
phk
6c6e9b3514 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
wpaul
bd6e00f32c The VIA Rhine appears to be yet another chip that always includes the
ethernet CRC in received frames and has no option to turn this behavior
off. Trim the CRC off manually in vr_rxeof().
1998-12-24 18:03:17 +00:00
bde
66eea65587 Flush the fifos at the correct place in cyopen(). Various things
in cyopen() were done in a different order than in sioopen(), partly
to (ab)use a side effect of comparam() and partly because I didn't
understand what the reset was doing (it flushes the fifos).  This
turned out to be more than a cosmetic problem.  Flushing the fifos
quite late is good for discarding input that arrived while the line
state was being initialized, and in the cy driver it also seems to
reduce a problem with input that arrived long ago during the previous
close (the UART loses sync too easily and for too long).
1998-12-24 14:17:57 +00:00
imp
fb5b48c1cb Invalid is spelled with the v *BEFORE* the a. 1998-12-22 22:31:06 +00:00
eivind
987c440a03 Error check is not necessary - this function cannot fail in this
context.

Noted by:	gibbs
1998-12-22 20:21:12 +00:00
gibbs
8a434eb2e3 Don't calculate the residual twice. 1998-12-22 18:14:50 +00:00
gibbs
b6ee7c1b3f Staticize the overrun buffer so that they are not shared between
cards of different bus types as each bus type may have a different
bus mapping.

Submitted by:	Eivind Eklund <eivind@yes.no>
1998-12-22 18:14:15 +00:00
gibbs
b4aed04769 Return NULL on resource shortage instead of blindly continuing.
Obtained from: Eivind Eklund <eivind@yes.no>
1998-12-22 18:12:09 +00:00
eivind
026c874b6d Better error checking and more complete struct initialization.
Reviewed by:	Simon Shapiro <shimon@simon-shapiro.org>
1998-12-22 00:52:27 +00:00
bde
3bb6da1b8b Wait for channel commands to complete after issuing the commands.
The optimisation of only waiting before issuing new commands is
obviously invalid in general and it caused many errors in NIST-PCTS.
I think the errors were mostly for characters sent with the wrong
parity, etc., after a half complete tcsetattr().

Use microtime() instead of a magic loop count to limit the wait.
The wait is a busy-wait :-( and normally takes about 500 usec.
1998-12-19 16:28:57 +00:00
bde
b3eb962304 Flush the tx fifo in cystop(). Now ttyflush() (and thus tcflush(3))
almost works properly.  Unfortunately, there is no way to flush
the rx fifo without resetting the channel, which also flushes the
tx fifo.  We avoid resetting even when both fifos need to be flushed,
since resetting seems to cause the rx to lose sync if it is done
while data is arriving.

Reminded by:	NIST-PCTS
1998-12-17 19:23:09 +00:00
bde
9cbd1c4cd2 Fixed handling of BREAK in input. BREAK was not being converted into an
escape sequence in the `-ignbrk -brkint parmrk' case.

Found by:	NIST-PCTS
1998-12-17 18:43:08 +00:00
bde
4d682cb5b4 Oops, this should have been in the previous commit (ensure atomic update
of com->cor[1]).
1998-12-17 18:18:06 +00:00
bde
54f96be976 Implemented sending of BREAKs. This is quite complicated because the
hardware is interrupt-driven to a fault and sending a BREAK requires
mode switching.  Always running in the BREAK-capable mode as in PR 8318
would double the overhead for sending \0's.

Reminded by:	PR 8318
1998-12-17 17:40:13 +00:00
gibbs
dc4a57e23b Fix a few problems with handling rejected transfer negotiation messages.
Use the host message loop for any unknown message types instead of performing
a reject message in the sequencer.  Pass reject messages to the host
message loop too which frees up a sequencer interrupt type slot.

Default to issuing a bus reset if initiator mode is enabled.  It seems
that the reset scsi bus bit is not defined in the same location for
all aic78xx BIOSes, so attempting to honor this setting will have to
wait until I get more information on how to detect it.

Nuke some unused variables.
1998-12-17 00:06:52 +00:00
phk
4674dad527 Straigthen out the use of the tls and tlf callbacks.
Not tested on the if_sr, if_cx and if_ar drivers, but
expected to work just the same as it used to.

Any users of these drivers (or even better: donors
of hardware for them) please contact phk@freebsd.org
so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
eivind
0a8613d749 vxalloc() can return NULL. Deal with it. 1998-12-16 00:38:57 +00:00
kato
74bccae1f5 Oops, I forgot to commit two diffs to fe driver. 1998-12-15 15:56:37 +00:00
kato
cc284d2636 PC/AT(ISA) version and PC-98(NEC) version of if_fe drivers are merged,
as well as several functional additions.

(1) dot3 MIB support.
(2) if_media selection method support.
(3) bridge support.
(4) new boards support. Supported boards are as follows.
    [PC/AT]
     * Fujitsu FMV-180 series
     * Allied-Telesis RE2000 series
     * Allied-Telesyn AT1700 series
     * Gateway Communications G/Ether series
     * UB networks Access/PC ISA series
     * TDK/LANX LAC-AX series
     * ICL EtherTeam16i series
     * RATOC REX-5586/5587
    [PC-98]
     * Allied-Telesis RE1000 series
     * Allied-Telesis RE1000Plus/ME1500 series
     * Contec C-NET(9N)E series
     * Contec C-NET(98)P2 series
     * UB networks Access/PC N98C+ series
     * TDK/LANX LAC-98 series(not tested)

Submitted by: seki@sysrap.cs.fujitsu.co.jp (Masahiro Sekiguchi) and
              chi@bd.mbn.or.jp (Chiharu Shibata)
1998-12-15 15:51:37 +00:00
gibbs
147f35e007 Pull in new ccb_hdr list types. 1998-12-15 08:24:45 +00:00
gibbs
4bb599f96c Perform a save data pointers operation if a data transfer was performed
in target mode, but we are not completing the command.

Use a template of allowed bus arbitration phases to selectively and
dynamically enable/disable initiator or target (re)selection.

Properly handle timeouts for target role transactions - just go to the
bus free state and report the error to the peripheral driver.

Checkpoint support for the XPT_ABORT_CCB function code.  This currently
handles the accept tio and immediate notify ccb types, but does not
handle the continue target I/O or SCSI I/O ccb types.  This is enough
to handle dynamic target enable/disable events.

Clean up the SCSI reset code so that we perform at most 1 SCSI bus
reset at initialization, the reset requested by the XPT layer.
1998-12-15 08:22:42 +00:00
n_hibma
1531d24acf Added UCLASS_CDC definitions to usb.h 1998-12-15 07:06:51 +00:00
imp
c1b89abf0d o Convert length of hccb to integer from the array. Eivind Eklund
pointed this out, but I've not seen a manifestation of this.
o Check against 0x00 as well as 0xff for geometry register, as some clone
  cards don't return 0xff.  Vadim Mikhailov pointed this out in PR
  8743 for his Dell SCSI Array controller working in AHA-1540
  emulation mode.  Note that this test is likely to go away in the
  future in favor of a better one Justin has recommended.
1998-12-15 02:51:54 +00:00
julian
f4d6fc7ea6 The OHCI interfaces I have access to map their control regs etc. into
memory address space rather than IO space.. reflect this when looking for the
interface revision register.

If this is not true for them all then we probably need some smarter code.
1998-12-14 21:14:11 +00:00
bde
746dcb079d Fixed LINT breakage in previous commit. Option FDC_YE enabled a
syntax error.  Options FDC_YE and DEVFS together enabled references
to a nonexistent variable and calls of a nonexistent function.
1998-12-14 16:29:58 +00:00
n_hibma
bb7a814654 Added Id 1998-12-14 09:40:15 +00:00
n_hibma
b25219fcba Added Id to all files 1998-12-14 09:32:25 +00:00
n_hibma
a9ce772c0c Added Id 1998-12-14 09:31:41 +00:00
n_hibma
3d4b15f81a Added comment 1998-12-14 09:15:19 +00:00
n_hibma
cccb885020 Added copyright and Id 1998-12-14 09:13:29 +00:00
dillon
1b46557c21 probe function changed from returning char * to const char *. 1998-12-14 06:37:37 +00:00
dillon
5e557fc6bd pci_device pd_probe function changed from returning char * to returning
const char *.  Originally I was going to add casts from const char * to
    char * in some of the pci device drivers, but the reality is that the
    pci device probes return constant quoted strings.
1998-12-14 05:47:29 +00:00
n_hibma
db1a25dccb small oops on previous bug fix, it's late... 1998-12-13 23:53:42 +00:00
n_hibma
067b9d6ac9 small bug fix 1998-12-13 23:26:41 +00:00
n_hibma
d6b94b79c0 Removed unneeded definition 1998-12-13 23:16:20 +00:00
steve
f8cec29a5c Add support for another 3COM/USR PNP modem, USR3031. 1998-12-13 23:12:54 +00:00
n_hibma
4f19f2cec5 dded the stubs for umodem and ucom (communications class driver). They are nothing other than
the ugen driver with different variable names.
1998-12-13 23:04:35 +00:00
eivind
8fdbb602f1 Remove warning introduced by the last committer. 1998-12-13 23:00:48 +00:00