free'd by the functions following its call, we can simply return instead
of crashing and burning in the event of igb_detach() failing.
PR: 197139
Submitted by: rupavath@juniper.net
MFC after: 2 weeks
The size field in the XENMEM_add_to_physmap_range is an uint16_t, and the
privcmd driver was doing an implicit truncation of an int into an uint16_t
when filling the hypercall parameters.
Fix this by adding a loop and making sure privcmd splits ioctl request into
2^16 chunks when issuing the hypercalls.
Reported and tested by: Marcin Cieslak <saper@saper.info>
Sponsored by: Citrix Systems R&D
Introduce some new helpers to declare and allocate a dynamic bitset, whose
size is not a constant.
Sponsored by: Citrix Systems R&D
Reviewed by: kib jhb
Differential revision: https://reviews.freebsd.org/D6226
Although usually small, values produced by nitems() are unsigned.
By unsigning the corresponding indexes we avoid signed vs unsigned
comparisons. This may have some effect on performance, although given the
small sizes the effect will not be perceivable and it makes the code
clearer.
Although usually small, values produced by nitems() are unsigned.
By unsigning the corresponding indexes we avoid signed vs unsigned
comparisons. This may have some effect on performance, although given the
small sizes the effect will not be perceivable, and it makes the code
clearer.
Respect the style of the changed files: one uses u_int while the other
uses "unsigned int".
Reviewed by: hselasky
Allow output pins to be read and input pins to be set.
Fix bugs where we were trying to access the gpio softc before doing
device_get_softc.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6222
PCI-express HotPlug support is implemented via bits in the slot
registers of the PCI-express capability of the downstream port along
with an interrupt that triggers when bits in the slot status register
change.
This is implemented for FreeBSD by adding HotPlug support to the
PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges
representing downstream ports on HotPlug slots. The PCI-PCI bridge
driver registers an interrupt handler to receive HotPlug events. It
also uses the slot registers to determine the current HotPlug state
and drive an internal HotPlug state machine. For simplicty of
implementation, the PCI-PCI bridge device detaches and deletes the
child PCI device when a card is removed from a slot and creates and
attaches a PCI child device when a card is inserted into the slot.
The PCI-PCI bridge driver provides a bus_child_present which claims
that child devices are present on HotPlug-capable slots only when a
card is inserted. Rather than requiring a timeout in the RC for
config accesses to not-present children, the pcib_read/write_config
methods fail all requests when a card is not present (or not yet
ready).
These changes include support for various optional HotPlug
capabilities such as a power controller, mechanical latch,
electro-mechanical interlock, indicators, and an attention button.
It also includes support for devices which require waiting for
command completion events before initiating a subsequent HotPlug
command. However, it has only been tested on ExpressCard systems
which support surprise removal and have none of these optional
capabilities.
PCI-express HotPlug support is conditional on the PCI_HP option
which is enabled by default on arm64, x86, and powerpc.
Reviewed by: adrian, imp, vangyzen (older versions)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6136
Further to r299119. GCC architectures failed with
bcma_subr.c:138: warning: control reaches end of non-void function
Sponsored by: The FreeBSD Foundation
- Hardcode '8' instead of NBBY in _BITSET_BITS.
- Define a private version of 'howmany' for use in __bitset_words().
- While here, move a few more things out of _bitset.h and _cpuset.h to
bitset.h and cpuset.h, respectively. The only things left in
_bitset.h and _cpuset.h are the bits needed to define a bitset
structure.
Reviewed by: bde, kib (ish)
"make tinderbox" fails on sparc64 GENERIC-NODEBUG with:
bhnd_subr.c:188: warning: control reaches end of non-void function
Sponsored by: The FreeBSD Foundation
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
Clocks, GPIO, UART, SD card / eMMC, USB, watchdog, and ethernet are
supported. Note that the A83T contains two clusters of four Cortex-A7
CPUs, and only CPUs in first cluster are started for now.
Tested on a Sinovoip Banana Pi BPI-M3.
Different versions of firmware have different requirments for TX/RX
packet layouts (and other things, of course.) Currently the driver
checks between 3xx and 4xx firmware by using the BWN_ISOLDFMT() macro,
which doesn't take into account the 5xx firmware (which I think I need
for the HT and N series PHY chips. I'll know when I do the port.)
BWN_HDRSIZE() also needs to learn about the 5xx series firmware
as well.
So:
* add a firmware version enum
* populate it based on the firmware version we read at load time
* don't finish loading if the firmware is the 5xx firmware; any
code using BWN_ISOLDFMT or BWN_HDRSIZE needs updating (most notably
the TX and RX bits.)
Then, for RX RSSI:
* write down and reimplement the b43 rssi calculation method;
* use it for the correct PHYs (which are all the ones we support);
* do the RSSI calculation before radiotap, not after.
Tested:
* Broadcom BCM4312, STA mode
Obtained from: Linux b43 (careful writing and reimplementing; lots of integer math..)
The change broke buildworld when building lib/libkvm
This change likely needs to be run through a ports -exp run as a sanity
check, as it might break downstream consumers.
Pointyhat to: adrian
Reported by: kargl (confirmed on $work workstation)
Sponsored by: EMC / Isilon Storage Division
Don't crash if the user has more than 31 of them. A follow-up to
r298230.
Reviewed by: allanjude
Relnotes: maybe
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6212
This is an initial work in progress to use the replacement bhnd
bus code for devices which support it.
* Add manpage updates for bhnd, bhndb, siba
* Add kernel options for bhnd, bhndbus, etc
* Add initial support in if_bwn_pci / if_bwn_mac for using bhnd
as the bus transport for suppoted NICs
* if_bwn_pci will eventually be the PCI bus glue to interface to bwn,
which will use the right backend bus to attach to, versus direct
nexus/bhnd attachments (as found in embedded broadcom devices.)
The PCI glue defaults to probing at a lower level than the bwn glue,
so bwn should still attach as per normal without a boot time tunable set.
It's also not fully fleshed out - the bwn probe/attach code needs to be
broken out into platform and bus specific things (just like ath, ath_pci,
ath_ahb) before we can shift the driver over to using this.
Tested:
* BCM4311, STA mode
* BCM4312, STA mode
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6191
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
The previous change to split the worker thread start out of fdc_attach()
did not start the worker thread if the fdc device in the ACPI namespace
did not have an _FDE method. This fixes hangs when booting with a
floppy controller enabled on certain machines with ACPI.
Tested by: joel
