the code auto-generated for *.m - kobj_lookup_method(9) is useful;
for example in back-ends or base class device drivers in order to
determine whether a default method has been overridden. Thus, allow
for the kobj_method_t pointer argument - used by KOBJOPLOOKUP in
order to update the cache entry - of kobj_lookup_method(9), to be
NULL. Actually, that pointer is redundant as it's just set to the
same kobj_method_t that the kobj_lookup_method(9) function returns
in the first place, but probably it serves to reduce the number of
instructions generated for KOBJOPLOOKUP.
- For the same reason, move updating kobj_lookup_{hits,misses} (if
KOBJ_STATS is defined) from kobj_lookup_method(9) to KOBJOPLOOKUP.
As a side-effect, this gets rid of the convoluted approach of always
incrementing kobj_lookup_hits in KOBJOPLOOKUP and then in case of
a cache miss, decrementing it in kobj_lookup_method(9) again.
Summary:
The Ubiquiti Unifi Security Gateway is virtually identical to the
EdgeRouter Lite, with a smaller PCB and apparently a different board identifier.
Simply adding the new board identifier alongside the ERL identifier, FreeBSD
boots successfully, and can access the needed peripherals (tested with USB
booting, and basic pings on one ethernet interface)
Reviewed By: adrian
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10639
When running the vnet init code (pf_load_vnet()) we used to iterate over
all vnets, marking them as unhooked.
This is incorrect and leads to panics if pf is unloaded, as the unload
code does not unregister the pfil hooks (because the vnet is marked as
unhooked).
There's no need or reason to touch other vnets during initialisation.
Their pf_load_vnet() function will be triggered, which handles all
required initialisation.
Reviewed by: zec, gnn
Differential Revision: https://reviews.freebsd.org/D10592
When sosend() replies ERESTART in the client side krpc, it indicates that
the RPC message hasn't yet been sent and that the send queue is full or
locked while a signal is posted for the process.
Without this patch, this would result in a RPC_CANTSEND reply from
clnt_vc_call(), which would cause clnt_reconnect_call() to create a new
TCP transport connection. For most NFS servers, this wasn't a serious problem,
although it did imply retries of outstanding RPCs, which could possibly
have missed the DRC.
For an NFSv4.1 mount to AmazonEFS, this caused a serious problem, since
AmazonEFS often didn't retain the NFSv4.1 session and would reply with
NFS4ERR_BAD_SESSION. This implies to the client a crash/reboot which
requires open/lock state recovery.
Three options were considered to fix this:
- Return the ERESTART all the way up to the system call boundary and then
have the system call redone. This is fraught with risk, due to convoluted
code paths, asynchronous I/O RPCs etc. cperciva@ worked on this, but it
is still a work in prgress and may not be feasible.
- Set SB_NOINTR for the socket buffer. This fixes the problem, but makes
the sosend() completely non interruptible, which kib@ considered
inappropriate. It also would break forced dismount when a thread
was blocked in sosend().
- Modify the retry loop in clnt_vc_call(), so that it loops for this case
for up to 15sec. Testing showed that the sosend() usually succeeded by
the 2nd retry. The extreme case observed was 111 loop iterations, or
about 100msec of delay.
This third alternative is what is implemented in this patch, since the
change is:
- localized
- straightforward
- forced dismount is not broken by it.
This patch has been tested by cperciva@ extensively against AmazonEFS.
Reported by: cperciva
Tested by: cperciva
MFC after: 2 weeks
The current read from network is working from up to down - we have some
protocol needing the data from the network, so we build the buffer space
for that protocol, add the extra space for headers and pass this buffer
down to be filled by nif get call in hope, we have guessed the incoming
packet size right. Amazingly enough this approach mostly does work, but
not always...
So, this update does work from down to up - we allocate buffer (based
on MTU or frame size info), fill it up, and pass on for upper layers.
The obvious problem is that when we should free the buffer - if at all.
In the current implementation the upper layer will free the packet on error
or when the packet is no longer needed.
While working on the issue, the additional issue did pop up - the bios
implementation does not have generic get/put interface but is using pxe
udpsend/udpreceive instead. So the udp calls are gone and undi interface
is implemented instead. Which in turn means slight other changes as we
do not need to have duplicated pxe implementation and can just use dev_net.
To align packet content, the actual read from nic is using shifted buffer by
ETHER_ALIGN (2).
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D10232
Don't use DHCP 150 option to decide which protocol use to netboot. When
root-path includes ip address - go thru NFS, if ip address not exists in
root-path - go thru TFTP from server which ip address is in next-server. But
there is one limitation - only one tftp server in network to provide loader and
everything else. Does enybody use more than only one?
Submitted by: kczekirda
Sponsored by: Oktawave
MFC after: 3 weeks
Relnote: Yes
Differential Revision: https://reviews.freebsd.org/D8740
* Target module have ic plus etherswitch ip175c.
* Also add etherswitch support code on rt driver.
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10336
This code base on lpc code. Ralink RT1310 is oem from 5V Technologies.
RT1310 is ARM926EJS(arm5t).
Tested:
* Buffalo WZR2-G300N
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D7238
Tested:
* on IOData WN-G300R. may be same as Sitecom WLR-2100.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10621
* use ifqmaxlen
* handle (inefficiently for now) meeting padding and alignment requirements for
transmit mbufs.
* change how TX ring handling is done
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10557
Add workaround mii access because of rt1310 is hang up on etherswitch mii poll.
And FDT away on arm platform.
Tested:
* wzr2-g300n
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10295
the TOE. For now this capability is always enabled in kernels with
options RATELIMIT. t4_tom will check if_capenable once the base driver
gets code to support rate limiting for any socket (TOE or not).
This was tested with iperf3 and netperf ToT as they already support
SO_MAX_PACING_RATE sockopt. There is a bug in firmwares prior to
1.16.45.0 that affects the BSD driver only and results in rate-limiting
at an incorrect rate. This will resolve by itself as soon as 1.16.45.0
or later firmware shows up in the driver.
Relnotes: Yes
Sponsored by: Chelsio Communications
This will help application developers simulate end of tape conditions.
To inject an error in sa0:
sysctl kern.cam.sa.0.inject_eom=1
This will return the next read or write request queued with 0 bytes
written. Any subsequent writes or reads will go along as usual.
This will also cause the early warning position flag to get set
for the next position query. So, 'mt status' will show the BPEW
(Beyond Programmable Early Warning) flag on the first query after
an error injection. After that, the position flags will be as they
are in the underlying tape drive.
Also, update the sa(4) man page to describe tape parameters,
which can be set via 'mt param'.
sys/cam/scsi/scsi_sa.c:
In saregister(), create the inject_eom sysctl variable.
In sastart(), check to see whether inject_eom is set. If
so, return the read or write with 0 bytes written to
indicate EOM. Set the set_pews_status flag so that we
fake PEWS status in the next position call for reads, and the
next 3 calls for writes. This allows the user to see the BPEW
flag one time via 'mt status'.
In sagetpos(), check the set_pews_status flag and fake
PEWS status and decrement the counter if it is set.
share/man/man4/sa.4:
Document the inject_eom sysctl variable.
Document all of the parameters currently supported via
'mt param'.
usr.bin/mt/mt.1:
Point the user to the sa(4) man page for more details on
supported parameters.
MFC after: 3 days
Sponsored by: Spectra Logic
The previous misuse of sys_sigqueue() was sending random register or
stack garbage to 64-bit targets. The freebsd32 implementation preserves
the sival_int member of value when signaling a 64-bit process.
Document the mixed ABI implementation of union sigval and the
incompability of sival_ptr with pointer integrity schemes.
Reviewed by: kib, wblock
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10605
makefs(1) has a number of signedness warnings (when built with higher
WARNS), most of which can be addressed by careful application of casts
in makefs itself.
There is one case where a signedness warning arises from the blksize
macro, so must be addressed in the macro itself.
Reviewed by: kib, mckusick
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10589
Background:
The same VM object might be shared by multiple processes and the
mm_struct is usually freed when a process exits.
Grab a reference on the mm_struct while the vmap is in the
linux_vma_head list in case the first process which inserted a VM
object has exited.
Tested by: kwm @
MFC after: 1 week
Sponsored by: Mellanox Technologies
operate similarly, other than not needing the delayed invalidation.
It has been tested with artificial injection of vm_page_alloc failures
while running 'sort /dev/zero'.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10574
Increase hw.psm.synaptics.min_pressure default value from 16 to 32
to nearly match Linux driver (30-35 hysteresis loop).
This makes libinput tap detection more reliable.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
It is already included via sys/systm.h
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
models. This change is based on Linux driver.
Determine logical trace size. It used for calculation of touch sizes
in surface units for MT-protocol type B evdev reports.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
Linux does. It should not affect gesture processing in current state as it
ignores finger coords on 3-finger tap detection but it should make evdev
reports looking more Linux-alike.
Reviewed by: gonzo
Approved by: gonzo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
This is done with discarding pointer movements rather then mouse packets
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
Elan hw v.4 touchpads often sends touchpad release packet right after
touchpad touch one. Most probably this happens due to PS/2 limited bandwith.
Reducing of tap_min_queue size to 1 makes multifinger tap detection
more reliable in this case.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
Wait for all advertised head packets after status packet have been received.
This fixes rare but quite annoying issue in Elan hw v.4 touchpads support
when triple-finger taps are reported as double-finger taps under several
circumstances.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
races at least in its ioctl handler, and at the same time it creates
device entry with 0666 permissions.
To plug possible issues in it:
- Mark it as needing Giant.
- Switch device mode to 0600.
Submitted by: C Turt
Reviewed by: imp
MFC after: 1 week
Security: Possible double free in ioctl handler
sys/cam/scsi/scsi_all.h:
Add the SCSI Solid State Media log page (0x11) structure
definition. This gives the percentage used (in terms of
lifetime flash wear) of an SSD.
MFC after: 3 days
Sponsored by: Spectra Logic
From user report, the errors are seen:
error 1
error 1
gptzfsboot: error 1 lba 4294967288
gptzfsboot: error 1 lba 1
gptzfsboot: no ZFS pools located, can't boot
The first two errors above are from issuing INT13 EAX=0x4800, meaning we
need to check if EDD is available and use EAX=0x800 if not.
For an workaround I'm using the similar idea as in biosdisk.c - first probe
ah=8h, then check if we have EDD.
Note we would like to see the correct disk size info, but we *may*
get away with anything >64MB, so we could at least test 2 zfs pool labels
on whole disk setup and not to freak out the INT13 interface.
If we get away with initial disk probing, then we have partition sizes from
the partition table and we should be able to complete the disk probing.
Note: this update does not provide full fix to all errors, but we get
the drvsize() errors removed.
Reported by: Michael W. Lucas
Reviewed by: julian
Differential Revision: https://reviews.freebsd.org/D10591
