in6_selectsrc() has 2 class of users: socket-based one (raw/udp/pcb/etc) and
socket-less (ND code). The main reason for that change is inability to
specify non-default FIB for callers w/o socket since (internally) inpcb
is used to determine fib.
As as result, add 2 wrappers for in6_selectsrc() (making in6_selectsrc()
static):
1) in6_selectsrc_socket() for the former class. Embed scope_ambiguous check
along with returning hop limit when needed.
2) in6_selectsrc_addr() for the latter case. Add 'fibnum' argument and
pass IPv6 address w/ explicitly specified scope as separate argument.
Reviewed by: ae (previous version)
in6_selectif().
The main task of in6_selectsrc() is to return IPv6 SAS (along with
output interface used for scope checks). No data-path code uses
route argument for caching. The only users are icmp6 (reflect code),
ND6 ns/na generation code. All this fucntions are control-plane, so
there is no reason to try to 'optimize' something by passing cached
route into to ip6_output(). Given that, simplify code by eliminating
in6_selectsrc() 'struct route_in6' argument. Since in6_selectif() is
used only by in6_selectsrc(), eliminate its 'struct route_in6' argument,
too. While here, reshape rte-related code inside in6_selectif() to
free lookup result immediately after saving all the needed fields.
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
ip_dooptions(), icmp6_redirect_input(), in6_lltable_rtcheck(),
in6p_lookup_mcast_ifp() and in6_selecthlim() use new routing api.
Eliminate now-unused ip_rtaddr().
Fix lookup key fib6_lookup_nh_basic() which was lost diring merge.
Make fib6_lookup_nh_basic() and fib6_lookup_nh_extended() always
return IPv6 destination address with embedded scope. Currently
rw_gateway has it scope embedded, do the same for non-gatewayed
destinations.
Sponsored by: Yandex LLC
On receipt of a redirect message, install an interface route for the
redirected destination. On removal of the corresponding Neighbor Cache
entry, remove the interface route.
This requires changes in rtredirect_fib() to cope with an AF_LINK
address for the gateway and with the absence of RTF_GATEWAY.
This fixes the "Redirected On-Link" test cases in the Tahi IPv6 Ready Logo
Phase 2 test suite.
Unrelated to the above, fix a recursion on the radix node head lock
triggered by the Tahi Redirected to Alternate Router test cases.
When I first wrote this patch in October 2012, all Section 2
(Neighbor Discovery) test cases passed on 10-CURRENT, 9-STABLE,
and 8-STABLE. cem@ recently rebased the 10.x patch onto head and reported
that it passes Tahi. (Thanks!)
These other test cases also passed in 2012:
* the RTF_MODIFIED case, with IPv4 and IPv6 (using a
RTF_HOST|RTF_GATEWAY route for the destination)
* the redirected-to-self case, with IPv4 and IPv6
* a valid IPv4 redirect
All testing in 2012 was done with WITNESS and INVARIANTS.
Tested by: EMC / Isilon Storage Division via Conrad Meyer (cem) in 2015,
Mark Kelley <mark_kelley@dell.com> in 2012,
TC Telkamp <terence_telkamp@dell.com> in 2012
PR: 152791
Reviewed by: melifaro (current rev), bz (earlier rev)
Approved by: kib (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D3602
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
It isn't safe to keep unreferenced ifaddrs. Use in6ifa_ifwithaddr() to
determine ifaddr corresponding to destination address. Since currently
we keep addresses with embedded scope zone, in6ifa_ifwithaddr is called
with zero zoneid and marked with XXX.
Also remove route and lle lookups from ip6_input. Use in6ifa_ifwithaddr()
instead.
Sponsored by: Yandex LLC
data in an mbuf, use M_WRITABLE() instead of a direct test of M_EXT;
the latter both unnecessarily exposes mbuf-allocator internals in the
protocol stack and is also insufficient to catch all cases of
non-writability.
(NB: m_pullup() does not actually guarantee that a writable mbuf is
returned, so further refinement of all of these code paths continues to
be required.)
Reviewed by: bz
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D900
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
PF_INET6 in kernel. This fixes various malfunction when the wall time
clock is changed. Bump __FreeBSD_version to 1000041.
- Use clock_gettime(CLOCK_MONOTONIC_FAST) in userland utilities.
MFC after: 1 month
- Do not calculate constant length values at run time,
CTASSERT() their sanity.
- Remove superfluous cleaning of mbuf fields after allocation.
- Replace compat macros with function calls.
Sponsored by: Nginx, Inc.
No need to hold the (expensive) rt lock over (expensive) logging.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn (as part of the whole)
MFC After: 3 days
Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.
This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.
Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days
separation rewrite changes. r196865 was committed to fix a scope
violation problem in the following test scenario:
box-1# ifconfig em0 inet6 2001:db8:1:: prefixlen 64 anycast
box-1# ifconfig em1 inet6 2001:db8:2::1 prefixlen 64
box-2# ifconfig re0 inet6 2001:db8:1::6 prefixlen 64
em0 and re0 are on the same link.
box-2# ping6 2001:db8:1::
PING6(56=40+8+8 bytes) 2001:db8:1::6 --> 2001:db8:1::
the ICMPv6 response should have a source address of em1, which
is 2001:db8:2::1, not the link-local address of em0.
That code is no longer necessary and breaks the IPv6-Ready logo
testing, so revert it now.
Reviewed by: hrs
MFC after: 3 days
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
Add kernel side support for Secure Neighbor Discovery (SeND), RFC 3971.
The implementation consists of a kernel module that gets packets from
the nd6 code, sends them to user space on a dedicated socket and reinjects
them back for further processing.
Hooks are used from nd6 code paths to divert relevant packets to the
send implementation for processing in user space. The hooks are only
triggered if the send module is loaded. In case no user space
application is connected to the send socket, processing continues
normaly as if the module would not be loaded. Unloading the module
is not possible at this time due to missing nd6 locking.
The native SeND socket is similar to a raw IPv6 socket but with its own,
internal pseudo-protocol.
Approved by: bz (mentor)
"Whitspace" churn after the VIMAGE/VNET whirls.
Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.
Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.
This also removes some header file pollution for putatively
static global variables.
Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.
Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days
scenario where an anycast address is assigned on one interface,
and a global address with the same scope is assigned on another
interface. In other words, the interface owns the anycast
address has only the link-local address as one other address.
Without this patch, "ping6" the anycast address from another
station will observe the source address of the returned ICMP6
echo reply has the link-local address, not the global address
that exists on the other interface in the same node.
Reviewed by: bz
MFC after: immediately
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
all pertinent statatistics for the subsystem. These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.
Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored. This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.
The following modules are affected by this change:
if_bridge
if_cxgb
if_gif
ip_mroute
ipdivert
pf
In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack. However, that change is too agressive for
this point in the release cycle.
Reviewed by: bz
Approved by: re (kib)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
to save the selected source address rather than returning an
unreferenced copy to a pointer that might long be gone by the
time we use the pointer for anything meaningful.
Asked for by: rwatson
Reviewed by: rwatson
rather than pointers, requiring callers to properly dispose of those
references. The following routines now return references:
ifaddr_byindex
ifa_ifwithaddr
ifa_ifwithbroadaddr
ifa_ifwithdstaddr
ifa_ifwithnet
ifaof_ifpforaddr
ifa_ifwithroute
ifa_ifwithroute_fib
rt_getifa
rt_getifa_fib
IFP_TO_IA
ip_rtaddr
in6_ifawithifp
in6ifa_ifpforlinklocal
in6ifa_ifpwithaddr
in6_ifadd
carp_iamatch6
ip6_getdstifaddr
Remove unused macro which didn't have required referencing:
IFP_TO_IA6
This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc). In a few cases, add missing if_addr_list locking
required to safely acquire references.
Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit. Once
we have mbuf tag deep copy support, this can be fixed.
Reviewed by: bz
Obtained from: Apple, Inc. (portions)
MFC after: 6 weeks (portions)