The argument has to be a single whitespace-separate value. While touching
all these lines also add ksh93, since `atf_set "require.progs"` overrides
the default value specified in the Kyuafile. This then results in tests
being executed despite ksh93 not being installed.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D29066
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
Messing with gnop devices under a zpool fails in this test, causing
the pool to be suspended and eventually the system to deadlock.
Skip the test for now until the issue is resolved.
PR: tests/248910
Discussed with: lwhsu
Sponsored by: iXsystems, Inc.
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
* Don't partition a disk if too few are available. Just rely on Kyua to
ensure that the tests aren't run with insufficient disks.
* Remove redundant cleanup steps
* In zpool_add_003_pos, store the temporary file in $PWD so Kyua will
automatically clean it up.
* Update zpool_add_005_pos to use dumpon instead of dumpadm. This test had
never been ported to FreeBSD.
* In zpool_add_005_pos, don't format the dump disk with UFS. That was
pointless.
MFC after: 2 weeks
Sponsored by: Axcient
The test is necessarily racy, because it depends on being able to complete a
"zpool add" before a previous resilver finishes. But it was racier than it
needed to be. Move the first "zpool add" to before the resilver starts.
MFC after: 2 weeks
Sponsored by: Axcient
The ZFS test suite was overriding the common $PWD variable with the path to
the pwd command, even though no test wanted to use it that way. Most tests
didn't notice, because ksh93 eventually restored it to its proper meaning.
MFC after: 2 weeks
Sponsored by: Axcient
* Don't create a UFS mountpoint just to store some temporary files. The
tests should always be executed with a sufficiently large TMPDIR.
Creating the UFS mountpoint is not only unneccessary, but it slowed
zpool_import_missing_002_pos greatly, because that test moves large files
between TMPDIR and the UFS mountpoint. This change also allows many of
the tests to be executed with just a single test disk, instead of two.
* Move zpool_import_missing_002_pos's backup device dir from / to $PWD to
prevent cross-device moves. On my system, these two changes improved that
test's speed by 39x. It should also prevent ENOSPC errors seen in CI.
* If insufficient disks are available, don't try to partition one of them.
Just rely on Kyua to skip the test. Users who care will configure Kyua
with sufficient disks.
MFC after: 2 weeks
Sponsored by: Axcient
It was trying to destroy the pool while zfsd was detaching the spare, and
"zpool destroy" failed. Fix by waiting until the spare has fully detached.
MFC after: 2 weeks
Sponsored by: Axcient
The test declared that it only needed 5 disks, but actually tried to use 6.
Fix it to use just 5, which is all it really needs.
MFC after: 2 weeks
Sponsored by: Axcient
* Fix force_sync_path, which ensures that a file is fully flushed to disk.
Apparently "zpool history"'s performance has improved, but exporting and
importing the pool still works.
* Fix file_dva by using undocumented zdb syntax to clarify that we're
interested in the pool's root file system, not the pool itself. This
should also fix the zpool_clear_001_pos test.
* Remove a redundant cleanup step
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D21901
These tests have never worked correctly
* Replace runwattr with sudo
* Fix a scoping bug with the "dtst" variable
* Cleanup user properties created during tests
* Eliminate the checks for refreservation and send support. They will always
be supported.
* Fix verify_fs_snapshot. It seemed to assume that permissions would not yet
be delegated, but that's not how it's actually used.
* Combine verify_fs_promote with verify_vol_promote
* Remove some useless sleeps
* Fix backwards condition in verify_vol_volsize
* Remove some redundant cleanup steps in the tests. cleanup.ksh will handle
everything.
* Disable some parts of the tests that FreeBSD doesn't support:
* Creating snapshots with mkdir
* devices
* shareisci
* sharenfs
* xattr
* zoned
The sharenfs parts could probably be reenabled with more work to remove the
Solarisms.
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D21898
ZFS has grown some additional properties that hadn't been added to the
config file yet. While I'm here, improve the error message, and remove a
superfluous command.
MFC after: 2 weeks
Sponsored by: Axcient
This test attempts to corrupt a file-backed vdev by deleting it and then
recreating it with truncate. But that doesn't work, because the pool
already has the vdev open, and it happily hangs on to the open-but-deleted
file. Fix by truncating the file without deleting it.
MFC after: 2 weeks
Sponsored by: Axcient
* Adapt zvol_misc_001_neg to use dumpon instead of Solaris's dumpadm
* Disable zvol_misc_003_neg, zvol_misc_005_neg, and zvol_misc_006_pos,
because they involve using a zvol as a dump device, which FreeBSD does not
yet support.
MFC after: 2 weeks
Sponsored by: Axcient
* Remove zpool_create_013_neg. FreeBSD doesn't have an equivalent of
Solaris's metadevices. GEOM would be the equivalent, but since all geoms
are the same from ZFS's perspective, this test would be redundant with
zpool_create_012_neg
* Remove zpool_create_014_neg. FreeBSD does not support swapping to regular
files.
* Remove zpool_create_016_pos. This test is redundant with literally every
other test that creates a disk-backed pool.
* s:/etc/vfstab:/etc/fstab in zpool_create_011_neg
* Delete the VTOC-related portion of zpool_create_008_pos. FreeBSD doesn't
use VTOC.
* Replace dumpadm with dumpon and swap with swapon in multiple tests.
* In zpool_create_015_neg, don't require "zpool create -n" to fail. It's
reasonable for that variant to succeed, because it doesn't actually open
the zvol.
* Greatly simplify zpool_create_012_neg. Make it safer, too, but not
interfering with the system's regular swap devices.
* Expect zpool_create_011_neg to fail (PR 241070)
* Delete some redundant cleanup steps in various tests
* Remove some unneeeded ATF timeout specifications. The default is fine.
PR: 241070
MFC after: 2 weeks
Sponsored by: Axcient
This mutes the duplicate target warning emitted via bsd.files.mk each build.
MFC after: 1 week
Reviewed by: asomers
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D19603
The code assumed that disks (devices) used for testing are always named
like /dev/foo, but there is no reason for that restriction and we can
easily support paths like /dev/stripe/bar.
The change is to account for a different order in which the recursive
destroy may be attempted. If we first try a dataset that can be destroyed
then it will be destroyed, but if we first try a dataset that cannot be
destroyed then we will not attempt to destroy the other dataset.
It was originally written by Sun as part of the STF (Solaris test framework).
They open sourced it in OpenSolaris, then HighCloud partially ported it to
FreeBSD, and Spectra Logic finished the port. We also added many testcases,
fixed many broken ones, and converted them all to the ATF framework. We've had
help along the way from avg, araujo, smh, and brd.
By default most of the tests are disabled. Set the disks Kyua variable to
enable them.
Submitted by: asomers, will, justing, ken, brd, avg, araujo, smh
Sponsored by: Spectra Logic Corp, HighCloud
