DW_FORM_flag_present dwarf attribute, so they do not print errors or
warnings on files that contain it. (This attribute can be emitted by
newer versions of clang and gcc.)
MFC after: 1 week
Before this change they were just leaked. Fortunately USB sticks now use
only one CCB, and so leak was only 2KB per detach, while other bigger SIMs
with much more allocated CCBs are rarely detached.
MFC after: 2 weeks
This basically restores the spirit of r203535, which was partially reverted
in r205557, while we still map fixed amount to work around transient issues
we experienced with r203535.
Prodded by: avg
Tested by: avg
MFC after: 1 week
the thread reference on the vp->v_rdev and use the returned struct
cdev *dev instead of using vp->v_rdev. Call dev_strategy_csw()
instead of dev_strategy(), since we now own the reference.
Since the csw was already calculated, test d_flags to avoid mapping
the buffer if the driver supports unmapped requests [*].
Suggested by: kan [*]
Reviewed by: kan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
but assumes that a thread reference was already obtained on the passed
device. Use the function from physio(), to avoid two extra dev_mtx
lock and unlock. Note that physio() is always used as the cdevsw
method, or is called from a cdevsw method, and the caller already owns
the reference.
dev_strategy() is left to keep KPI intact, but now it is implemented
as a wrapper around dev_strategy_csw().
Do some style cleanup in physio().
Requested and reviewed by: kan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
maxbcache size fixed, the auto-tuned transient map is too small for
real-world load on i386.
Tested by: David Wolfskill
Sponsored by: The FreeBSD Foundation
buffer map size, auto-tuned on the 4GB machine. Having the maxbcache
bigger than the buffer map causes the transient bio map sizing logic
to assume that there is enough KVA to use approximately 90MB (buffer
map is sized to 110MB, and maxbcache is 200MB). The increase in the
KVA usage caused other big KVA consumers, like nvidia.ko, to fail the
initialization.
Change the definition for both PAE and non-PAE cases, since PAE is
even more KVA-starved.
Reported and tested by: David Wolfskill
Discussed with: alc
Sponsored by: The FreeBSD Foundation
Removed the check for regex.h in configure in order
to disable regex syntax checking, as it exposes
BIND to a critical flaw in libregex on some
platforms. [RT #32688]
Security: CVE-2013-2266
Approved by: delphij (mentor)
Sponsored by: DK Hostmaster A/S
which requires OVREF to be set to get proper playback volume, but which has
all zeroes in HDA controller subdevice IDs on PCI.
MFC after: 1 month
Sponsored by:
CPUs.
The AR933x is a mips24k based SoC with an AR9380 series SoC on board,
two gigabit ethernet interfaces and an internal 10/100mbit ethernet
switch. There's also the normal interfaces (USB, ethernet, uart, GPIO.)
The downside? There's a non-ns8250 UART device.
With a very basic UART driver (not in this commit) the SoC is initialised
and boots up. I'll commit the UART code soon and then link it into the
general setup path.
This code is a re-implementation based from the Linux kernel / openwrt
AR933x support.
TODO:
* UART (obviously)
* All of the ethernet, USB and wifi SoC glue, including ethernet PLL
programming.
data buffer for a ccb that is unmapped.
This case is currently not possible, since the SCI framework only
requests these pointers for doing SCSI/ATA translation of non-
READ/WRITE commands. The panic is more to protect against the
unlikely future scenario where additional commands could be unmapped.
Sponsored by: Intel
the most-recently archived logfile and use its mtime to determine whether
or not to rotate, as in the non-timestamped case.
Previously we would just try to use the mtime of <logfile>.0, which always
results in a rotation since it generally doesn't exist in the -t case.
PR: bin/166448
Approved by: emaste (co-mentor)
Tested by: Marco Steinbach <coco executive-computing.de>
MFC after: 2 weeks
While almost nobody uses O_ASYNC, and rightly so, the inheritance of the
related properties across accept() is a portability issue like the
inheritance of O_NONBLOCK.
fail in nvmecontrol(8).
While here, use consistent checks of return values from stat, open and
ioctl.
Sponsored by: Intel
Suggested by: carl
Reviewed by: carl
mechanism.
Now that all requests are timed, we are guaranteed to get a completion
notification, even if it is an abort status due to a timed out admin
command.
This has the effect of simplifying the controller and namespace setup
code, so that it reads straight through rather than broken up into
a bunch of different callback functions.
Sponsored by: Intel
Reviewed by: carl
start or reset. Also add a notifier for NVMe consumers for controller fail
conditions and plumb this notifier for nvd(4) to destroy the associated
GEOM disks when a failure occurs.
This requires a bit of work to cover the races when a consumer is sending
I/O requests to a controller that is transitioning to the failed state. To
help cover this condition, add a task to defer completion of I/Os submitted
to a failed controller, so that the consumer will still always receive its
completions in a different context than the submission.
Sponsored by: Intel
Reviewed by: carl
This is just as effective, and removes the need for a bunch of admin commands
to a controller that's going to be disabled shortly anyways.
Sponsored by: Intel
Reviewed by: carl
start process.
The spec indicates the OS driver should use Set Features (Software
Progress Marker) to set the pre-boot software load count to 0
after the OS driver has successfully been initialized. This allows
pre-boot software to determine if there have been any issues with the
OS loading.
Sponsored by: Intel
Reviewed by: carl
This flag was originally added to communicate to the sysctl code
which oids should be built, but there are easier ways to do this. This
needs to be cleaned up prior to adding new controller states - for example,
controller failure.
Sponsored by: Intel
Reviewed by: carl
The controller's IDENTIFY data contains MDTS (Max Data Transfer Size) to
allow the controller to specify the maximum I/O data transfer size. nvme(4)
already provides a default maximum, but make sure it does not exceed what
MDTS reports.
Sponsored by: Intel
Reviewed by: carl
that if a specific I/O repeatedly times out, we don't retry it indefinitely.
The default number of retries will be 4, but is adjusted using hw.nvme.retry_count.
Sponsored by: Intel
Reviewed by: carl
specified log page.
This satisfies the spec condition that future async events of the same type
will not be sent until the associated log page is fetched.
Sponsored by: Intel
Reviewed by: carl
NVMe error log entries include status, so breaking this out into
its own data structure allows it to be included in both the
nvme_completion data structure as well as error log entry data
structures.
While here, expose nvme_completion_is_error(), and change all of
the places that were explicitly looking at sc/sct bits to use this
macro instead.
Sponsored by: Intel
Reviewed by: carl
This protects against cases where a controller crashes with multiple
I/O outstanding, each timing out and requesting controller resets
simultaneously.
While here, remove a debugging printf from a previous commit, and add
more logging around I/O that need to be resubmitted after a controller
reset.
Sponsored by: Intel
Reviewed by: carl
While aborts are typically cleaner than a full controller reset, many times
an I/O timeout indicates other controller-level issues where aborts may not
work. NVMe drivers for other operating systems are also defaulting to
controller reset rather than aborts for timed out I/O.
Sponsored by: Intel
Reviewed by: carl
This avoids having separate cases in the install rule for PROGNAME set and
not set. This is a minor cleanup in advance of further support for
standalone debug files.
(Yes, the previous code temporarily broke EDMA TX. I'm sorry; I should've
actually setup ATH_BUF_FIFOEND on frames so txq->axq_fifo_depth was
cleared!)
This code implements a whole bunch of sorely needed EDMA TX improvements
along with CABQ TX support.
The specifics:
* When filling/refilling the FIFO, use the new TXQ staging queue
for FIFO frames
* Tag frames with ATH_BUF_FIFOPTR and ATH_BUF_FIFOEND correctly.
For now the non-CABQ transmit path pushes one frame into the TXQ
staging queue without setting up the intermediary link pointers
to chain them together, so draining frames from the txq staging
queue to the FIFO queue occurs AMPDU / MPDU at a time.
* In the CABQ case, manually tag the list with ATH_BUF_FIFOPTR and
ATH_BUF_FIFOEND so a chain of frames is pushed into the FIFO
at once.
* Now that frames are in a FIFO pending queue, we can top up the
FIFO after completing a single frame. This means we can keep
it filled rather than waiting for it drain and _then_ adding
more frames.
* The EDMA restart routine now walks the FIFO queue in the TXQ
rather than the pending queue and re-initialises the FIFO with
that.
* When restarting EDMA, we may have partially completed sending
a list. So stamp the first frame that we see in a list with
ATH_BUF_FIFOPTR and push _that_ into the hardware.
* When completing frames, only check those on the FIFO queue.
We should never ever queue frames from the pending queue
direct to the hardware, so there's no point in checking.
* Until I figure out what's going on, make sure if the TXSTATUS
for an empty queue pops up, complain loudly and continue.
This will stop the panics that people are seeing. I'll add
some code later which will assist in ensuring I'm populating
each descriptor with the correct queue ID.
* When considering whether to queue frames to the hardware queue
directly or software queue frames, make sure the depth of
the FIFO is taken into account now.
* When completing frames, tag them with ATH_BUF_BUSY if they're
not the final frame in a FIFO list. The same holding descriptor
behaviour is required when handling descriptors linked together
with a link pointer as the hardware will re-read the previous
descriptor to refresh the link pointer before contiuning.
* .. and if we complete the FIFO list (ie, the buffer has
ATH_BUF_FIFOEND set), then we don't need the holding buffer
any longer. Thus, free it.
Tested:
* AR9380/AR9580, STA and hostap
* AR9280, STA/hostap
TODO:
* I don't yet trust that the EDMA restart routine is totally correct
in all circumstances. I'll continue to thrash this out under heavy
multiple-TXQ traffic load and fix whatever pops up.
On any I/O timeout, check for csts.cfs==1. If set, the controller
is reporting fatal status and we reset the controller immediately,
rather than trying to abort the timed out command.
This changeset also includes deferring the controller start portion
of the reset to a separate task. This ensures we are always performing
a controller start operation from a consistent context.
Sponsored by: Intel
Reviewed by: carl
