structures in the add of a new tcp-stack that came in late to me
via email after the last commit. It also makes it so that a new
stack may optionally get a callback during a retransmit
timeout. This allows the new stack to clear specific state (think
sack scoreboards or other such structures).
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D6303
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
route caching for TCP, with some improvements. In particular, invalidate
the route cache if a new route is added, which might be a better match.
The cache is automatically invalidated if the old route is deleted.
Submitted by: Mike Karels
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4306
60 seconds, respectively. Turn them into sysctls that can be tuned live. The
default values of 5 seconds and 60 seconds have been retained.
Submitted by: Jason Wolfe (j at nitrology dot com)
Reviewed by: gnn, rrs, hiren, bz
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D5024
and t_maxseg. This dualism emerged with T/TCP, but was not properly cleaned
up after T/TCP removal. After all permutations over the years the result is
that t_maxopd stores a minimum of peer offered MSS and MTU reduced by minimum
protocol header. And t_maxseg stores (t_maxopd - TCPOLEN_TSTAMP_APPA) if
timestamps are in action, or is equal to t_maxopd otherwise. That's a very
rough estimate of MSS reduced by options length. Throughout the code it
was used in places, where preciseness was not important, like cwnd or
ssthresh calculations.
With this change:
- t_maxopd goes away.
- t_maxseg now stores MSS not adjusted by options.
- new function tcp_maxseg() is provided, that calculates MSS reduced by
options length. The functions gives a better estimate, since it takes
into account SACK state as well.
Reviewed by: jtl
Differential Revision: https://reviews.freebsd.org/D3593
TFO is disabled by default in the kernel build. See the top comment
in sys/netinet/tcp_fastopen.c for implementation particulars.
Reviewed by: gnn, jch, stas
MFC after: 3 days
Sponsored by: Verisign, Inc.
Differential Revision: https://reviews.freebsd.org/D4350
to do is to clean up the timer handling using the async-drain.
Other optimizations may be coming to go with this. Whats here
will allow differnet tcp implementations (one included).
Reviewed by: jtl, hiren, transports
Sponsored by: Netflix Inc.
Differential Revision: D4055
new return codes of -1 were mistakenly being considered "true". Callout_stop
now returns -1 to indicate the callout had either already completed or
was not running and 0 to indicate it could not be stopped. Also update
the manual page to make it more consistent no non-zero in the callout_stop
or callout_reset descriptions.
MFC after: 1 Month with associated callout change.
retransmission timeout (rto) when blackhole detection is enabled. Make
sure it only happens when the second attempt to send the same segment also fails
with rto.
Also make sure that each mtu probing stage (usually 1448 -> 1188 -> 524) follows
the same pattern and gets 2 chances (rto) before further clamping down.
Note: RFC4821 doesn't specify implementation details on how this situation
should be handled.
Differential Revision: https://reviews.freebsd.org/D3434
Reviewed by: sbruno, gnn (previous version)
MFC after: 2 weeks
Sponsored by: Limelight Networks
to provide the TCPDEBUG functionality with pure DTrace.
Reviewed by: rwatson
MFC after: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: D3530
workaround for a callout(9) issue, it turns out it is instead the right
way to use callout in mpsafe mode without using callout_drain().
r284245 commit message:
Fix a callout race condition introduced in TCP timers callouts with r281599.
In TCP timer context, it is not enough to check callout_stop() return value
to decide if a callout is still running or not, previous callout_reset()
return values have also to be checked.
Differential Revision: https://reviews.freebsd.org/D2763
timers callouts with r281599."
r281599 fixed a TCP timer race condition, but due a callout(9) bug
it also introduced another race condition workaround-ed with r284245.
The callout(9) bug being fixed with r286880, we can now revert the
workaround (r284245).
Differential Revision: https://reviews.freebsd.org/D2079 (Initial change)
Differential Revision: https://reviews.freebsd.org/D2763 (Workaround)
Differential Revision: https://reviews.freebsd.org/D3078 (Fix)
Sponsored by: Verisign, Inc.
MFC after: 2 weeks
- The existing TCP INP_INFO lock continues to protect the global inpcb list
stability during full list traversal (e.g. tcp_pcblist()).
- A new INP_LIST lock protects inpcb list actual modifications (inp allocation
and free) and inpcb global counters.
It allows to use TCP INP_INFO_RLOCK lock in critical paths (e.g. tcp_input())
and INP_INFO_WLOCK only in occasional operations that walk all connections.
PR: 183659
Differential Revision: https://reviews.freebsd.org/D2599
Reviewed by: jhb, adrian
Tested by: adrian, nitroboost-gmail.com
Sponsored by: Verisign, Inc.
In TCP timer context, it is not enough to check callout_stop() return value
to decide if a callout is still running or not, previous callout_reset()
return values have also to be checked.
Differential Revision: https://reviews.freebsd.org/D2763
Reviewed by: hiren
Approved by: hiren
MFC after: 1 day
Sponsored by: Verisign, Inc.
TCP timers:
- Add a reference from tcpcb to its inpcb
- Defer tcpcb deletion until TCP timers have finished
Differential Revision: https://reviews.freebsd.org/D2079
Submitted by: jch, Marc De La Gueronniere <mdelagueronniere@verisign.com>
Reviewed by: imp, rrs, adrian, jhb, bz
Approved by: jhb
Sponsored by: Verisign, Inc.
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
from xnu sources. If we encounter a network where ICMP is blocked
the Needs Frag indicator may not propagate back to us. Attempt to
downshift the mss once to a preconfigured value.
Default this feature to off for now while we do not have a full PLPMTUD
implementation in our stack.
Adds the following new sysctl's for control:
net.inet.tcp.pmtud_blackhole_detection -- turns on/off this feature
net.inet.tcp.pmtud_blackhole_mss -- mss to try for ipv4
net.inet.tcp.v6pmtud_blackhole_mss -- mss to try for ipv6
Adds the following new sysctl's for monitoring:
-- Number of times the code was activated to attempt a mss downshift
net.inet.tcp.pmtud_blackhole_activated
-- Number of times the blackhole mss was used in an attempt to downshift
net.inet.tcp.pmtud_blackhole_min_activated
-- Number of times that we failed to connect after we downshifted the mss
net.inet.tcp.pmtud_blackhole_failed
Phabricator: https://reviews.freebsd.org/D506
Reviewed by: rpaulo bz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks
lookup for the inp flowid/flowtype to destination CPU.
This only modifies the case where RSS is enabled and the per-cpu tcp
timer option is enabled. Otherwise the behaviour should be the same
as before.
walks the list of connections in TIME_WAIT closing expired connections
due to contention on the global TCP pcbinfo lock.
To remediate, introduce a new global lock to protect the list of
connections in TIME_WAIT. Only acquire the TCP pcbinfo lock when
closing an expired connection. This limits the window of time when
TCP input processing is stopped to the amount of time needed to close
a single connection.
Submitted by: Julien Charbon <jcharbon@verisign.com>
Reviewed by: rwatson, rrs, adrian
MFC after: 2 months
precise time event generation. This greatly improves granularity of
callouts which are not anymore constrained to wait next tick to be
scheduled.
- Extend the callout KPI introducing a set of callout_reset_sbt* functions,
which take a sbintime_t as timeout argument. The new KPI also offers a
way for consumers to specify precision tolerance they allow, so that
callout can coalesce events and reduce number of interrupts as well as
potentially avoid scheduling a SWI thread.
- Introduce support for dispatching callouts directly from hardware
interrupt context, specifying an additional flag. This feature should be
used carefully, as long as interrupt context has some limitations
(e.g. no sleeping locks can be held).
- Enhance mechanisms to gather informations about callwheel, introducing
a new sysctl to obtain stats.
This change breaks the KBI. struct callout fields has been changed, in
particular 'int ticks' (4 bytes) has been replaced with 'sbintime_t'
(8 bytes) and another 'sbintime_t' field was added for precision.
Together with: mav
Reviewed by: attilio, bde, luigi, phk
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo (amd64, sparc64), marius (sparc64), ian (arm),
markj (amd64), mav, Fabian Keil
SYNs (or SYN/ACK replies) are dropped due to network congestion, then the
remote end of the connection may act as if options such as window scaling
are enabled but the local end will think they are not. This can result in
very slow data transfers in the case of window scaling disagreements.
The old behavior can be obtained by setting the
net.inet.tcp.rexmit_drop_options sysctl to a non-zero value.
Reviewed by: net@
MFC after: 2 weeks
after a much reduced timeout.
Typically web servers close their sockets quickly under the assumption
that the TCP connections goes away as well. That is not entirely true
however. If the peer closed the window we're going to wait for a long
time with lots of data in the send buffer.
MFC after: 2 weeks
the default retransmit timeout, as base to calculate the backoff
time until next try instead of the TCP_REXMTVAL() macro which only
works correctly when we already have measured an actual RTT+RTTVAR.
Before it would cause the first retransmit at RTOBASE, the next
four at the same time (!) about 200ms later, and then another one
again RTOBASE later.
MFC after: 2 weeks
reduce the initial CWND to one segment. This reduction got lost
some time ago due to a change in initialization ordering.
Additionally in tcp_timer_rexmt() avoid entering fast recovery when
we're still in TCPS_SYN_SENT state.
MFC after: 2 weeks
callout_deactivate(), so if INP_DROPPED is set we return with the
timer active flag cleared.
For me this fixes negative keep timer values reported by `netstat -x'
for connections in CLOSE state.
Approved by: net (silence)
MFC after: 2 weeks
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
These are available as t3_tom and t4_tom modules that augment cxgb(4)
and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as
usual with or without these extra features.
- iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the
works and will follow soon.
Build-tested with make universe.
30s overview
============
What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE
Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe
Which connections are offloaded? Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe
Reviewed by: bz, gnn
Sponsored by: Chelsio communications.
MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
TCP_KEEPCNT, that allow to control initial timeout, idle time, idle
re-send interval and idle send count on a per-socket basis.
Reviewed by: andre, bz, lstewart
- The existing ipi_lock continues to protect the global inpcb list and
inpcb counter. This lock is now relegated to a small number of
allocation and free operations, and occasional operations that walk
all connections (including, awkwardly, certain UDP multicast receive
operations -- something to revisit).
- A new ipi_hash_lock protects the two inpcbinfo hash tables for
looking up connections and bound sockets, manipulated using new
INP_HASH_*() macros. This lock, combined with inpcb locks, protects
the 4-tuple address space.
Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb
connection locks, so may be acquired while manipulating a connection on
which a lock is already held, avoiding the need to acquire the inpcbinfo
lock preemptively when a binding change might later be required. As a
result, however, lookup operations necessarily go through a reference
acquire while holding the lookup lock, later acquiring an inpcb lock --
if required.
A new function in_pcblookup() looks up connections, and accepts flags
indicating how to return the inpcb. Due to lock order changes, callers
no longer need acquire locks before performing a lookup: the lookup
routine will acquire the ipi_hash_lock as needed. In the future, it will
also be able to use alternative lookup and locking strategies
transparently to callers, such as pcbgroup lookup. New lookup flags are,
supplementing the existing INPLOOKUP_WILDCARD flag:
INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb
INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb
Callers must pass exactly one of these flags (for the time being).
Some notes:
- All protocols are updated to work within the new regime; especially,
TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely
eliminated, and global hash lock hold times are dramatically reduced
compared to previous locking.
- The TCP syncache still relies on the pcbinfo lock, something that we
may want to revisit.
- Support for reverting to the FreeBSD 7.x locking strategy in TCP input
is no longer available -- hash lookup locks are now held only very
briefly during inpcb lookup, rather than for potentially extended
periods. However, the pcbinfo ipi_lock will still be acquired if a
connection state might change such that a connection is added or
removed.
- Raw IP sockets continue to use the pcbinfo ipi_lock for protection,
due to maintaining their own hash tables.
- The interface in6_pcblookup_hash_locked() is maintained, which allows
callers to acquire hash locks and perform one or more lookups atomically
with 4-tuple allocation: this is required only for TCPv6, as there is no
in6_pcbconnect_setup(), which there should be.
- UDPv6 locking remains significantly more conservative than UDPv4
locking, which relates to source address selection. This needs
attention, as it likely significantly reduces parallelism in this code
for multithreaded socket use (such as in BIND).
- In the UDPv4 and UDPv6 multicast cases, we need to revisit locking
somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which
is no longer sufficient. A second check once the inpcb lock is held
should do the trick, keeping the general case from requiring the inpcb
lock for every inpcb visited.
- This work reminds us that we need to revisit locking of the v4/v6 flags,
which may be accessed lock-free both before and after this change.
- Right now, a single lock name is used for the pcbhash lock -- this is
undesirable, and probably another argument is required to take care of
this (or a char array name field in the pcbinfo?).
This is not an MFC candidate for 8.x due to its impact on lookup and
locking semantics. It's possible some of these issues could be worked
around with compatibility wrappers, if necessary.
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
persist state and the retransmit timer. However, the code that implements
"bad retransmit recovery" only checks t_rxtshift to see if an ACK has been
received in during the first retransmit timeout window. As a result, if
ticks has wrapped over to a negative value and a socket is in the persist
state, it can incorrectly treat an ACK from the remote peer as a
"bad retransmit recovery" and restore saved values such as snd_ssthresh and
snd_cwnd. However, if the socket has never had a retransmit timeout, then
these saved values will be zero, so snd_ssthresh and snd_cwnd will be set
to 0.
If the socket is in fast recovery (this can be caused by excessive
duplicate ACKs such as those fixed by 220794), then each ACK that arrives
triggers either NewReno or SACK partial ACK handling which clamps snd_cwnd
to be no larger than snd_ssthresh. In effect, the socket's send window
is permamently stuck at 0 even though the remote peer is advertising a
much larger window and pending data is only sent via TCP window probes
(so one byte every few seconds).
Fix this by adding a new TCP pcb flag (TF_PREVVALID) that indicates that
the various snd_*_prev fields in the pcb are valid and only perform
"bad retransmit recovery" if this flag is set in the pcb. The flag is set
on the first retransmit timeout that occurs and is cleared on subsequent
retransmit timeouts or when entering the persist state.
Reviewed by: bz
MFC after: 2 weeks
