* Set MK_OPENMP to yes by default only on amd64, for now.
* Bump __FreeBSD_version to signal this addition.
* Ensure gcc's conflicting omp.h is not installed if MK_OPENMP is yes.
* Update OptionalObsoleteFiles.inc to cope with the conflicting omp.h.
* Regenerate src.conf(5) with new WITH/WITHOUT fragments.
Relnotes: yes
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
This permits legacy GDB to still be built and installed if
WITHOUT_BINUTILS is set (e.g. if base/binutils is installed).
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19480
Summary:
GCC expects to link in a crtsavres.o on powerpc platforms. On
powerpc64 this is an empty file, but on powerpc and powerpcspe this does contain
some save/restore functions, which may not actually be necessary for newer
modern GCC and clang. This appeases the in-tree gcc, though, and is needed in
order to switch to the BSD CRTRBEGIN.
PR: 233751
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D18826
Without this change I get lots of
warning: duplicate script for target "_FILESINS_ldscripts/elf64btsmip_fbsd.xw" ignored
message for every tree walk.
Reviewed By: imp, emaste
Differential Revision: https://reviews.freebsd.org/D18783
GNU binutils ld.bfd 2.17.50 does not support ifuncs and produces broken
binaries when ifuncs are in use. When LLD_IS_LD is default we have an
ifunc-capable system linker and can just avoid installing ld.bfd.
Reported by: theraven
Reviewed by: bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18340
These are needed for .ctors/.dtors and .jcr handling. The former needs
all the function pointers to be called in the correct order from the
.init/.fini section. The latter just needs to call a gcj specific function
if it exists with a pointer to the start of the .jcr section.
This is currently disabled until __dso_handle support is added.
Reviewed by: emaste
MFC after: 1 month
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17587
We're studing the possibility of deprecating sbrk(). To make it easier
we're removing unnecessicary uses in the base system. None of these
tools require sbrk(), but they agressively prefer it for no good reason.
Reviewed by: andrew
Approved by: re (kib)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16141
Its been quite a while since the last time we updated this and since then
we have grown iconv and a bunch of complex math functions.
This only applies to the platforms which still use GCC 4.2.1 in the
toolchain.
Differential Revision: https://reviews.freebsd.org/D16289
- Change the C++ directory entries to honor --sysroot if it is set.
- Don't define CROSS_INCLUDE_DIR for the cross compiler. Instead, set
TARGET_SYSTEM_ROOT to point to WORLDTMP and always define
STANDARD_INCLUDE_DIR.
- Change STANDARD_INCLUDE_DIR and the C++ include directories to just
start with "/usr" always. The compiler will prepend the sysroot when
doing cross-builds. GCC_INCLUDE_DIR (which contains headers that ship
with the compiler such as intrinsincs rather than OS-supplied headers)
remains hardcoded to look in TOOLS_PREFIX.
Reviewed by: bdrewery (older version)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15127
GCC 4.2 prefixes these directories with --sysroot meaning that during
buildworld they have a double sysroot.
Reviewed by: bdrewery
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14780
LLD_BOOTSTRAP (build) is independent of LLD_IS_LD (installed) so they
should not be based on each other.
This is related to upcoming WITH_SYSTEM_LINKER work.
Reviewed by: emaste
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15836
Import the wrapper script from zstdgrep (written by wiz@netbsd.org)
Modify it to support more than just zstd (adding support for gzip,
lzma, xz and bzip2)
Write a simple manpage dedicated for it.
Only use that new wrapper both for gnu grep and bsd grep
Next step will be removing code related to compression format from bsdgrep
Reviewed by: kevans
Approved by: kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15193
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
When WITH_LLD_IS_LD is set, lld's man page is installed as ld.1.gz, as
was GNU BFD's man page prior to this change.
Reported by: Tobias Kortkamp
Sponsored by: The FreeBSD Foundation
has been switched to libedit long ago, libreadline was built as an
internallib for a while and kept only for gdbtui which was broken using
libreadline.
Since gdb has been mostly deorbitted in all arches, gdbtui was only installed
on arm and sparc64, given it has been removed, gdb has been switched to use
libedit, no consumers are left for libreadline. Thus this removal
only installed on arm and sparc64.
It is the only bits that keeps us having libreadline in base
The rest of gdb can be switched to libedit and will be in another
commit
It merely wanted to use 'all' rather than 'build-tools' so just
add a build-tools target to the Makefile.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
Consolidate all the regular expressions to convert from MACHINE_ARCH
to MACHINE_CPUARCH into a variable and use that variable in preference
to the almost identical copies in the tree (which should have been
identical).
Differential Revision: https://reviews.freebsd.org/D11986
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
Even though gdb and kgdb may not be removed for 12.0 on some architectures,
the notice is unconditional as these tools will likely be removed at some
point in the future when adequate replacements are available (gdb in ports
or lldb in base).
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11477
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
When this option is enabled, only gdb and kgdb are installed to
/usr/libexec for use by crashinfo(8). Other bits of GDB such as
gdbserver and gdbtui are not installed. For this option to be
effective, GDB must be enabled.
Rework r317094 to re-enable GDB on all platforms but enable
GDB_LIBEXEC on platforms for which the GDB in ports is a superset of
functionality.
Reviewed by: emaste, kib
Suggested by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10449
After r307655 MK_GDB is forced to no if MK_BINUTILS is no, and similarly
MK_GROFF is forced to no if MK_CXX is no, so we can remove nested
conditionals.
Reviewed by: bapt, brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8287
Prefer SRCTOP over CURDIR/../../contrib, etc. However, retain the "up
one level" instances of ../ because they are really relative to this
part of the tree and not a means to find the root of the tree. As
such, it's better to leave them since that further the goal of being
able to move directories if watned to in the future.
Differential Revision: https://reviews.freebsd.org/D9932
Sponsored by: Netflix
Silence On: arch@ (twice)
Some of the modifications from the previous summer of code has been integrated
Modification for compatibility with GNU diff output has been added
Main difference with OpenBSD:
Implement multiple GNU diff options:
* --ignore-file-name-case
* --no-ignore-file-name-case
* --normal
* --tabsize
* --strip-trailing-cr
Make diff -p compatible with GNU diff
Implement diff -l
Make diff -r compatible with GNU diff
Capsicumize diffing 2 regular files
Add a simple test suite
Approved by: AsiaBSDcon devsummit
Obtained from: OpenBSD, GSoC
Relnotes: yes
