Commit Graph

85774 Commits

Author SHA1 Message Date
Oleksandr Tymoshenko
fa1e9b3a72 Add DTrace-related part to machine-dependent code:
- DTrace trap handler
- invop-related variables (unused on MIPS but still referenced from dtrace)
2012-03-24 05:17:38 +00:00
Oleksandr Tymoshenko
2c1620b407 Jusy use i386 version of cyclic_machdep.c on all supported architectures.
It's generic enough to cover all of them.
2012-03-24 05:16:26 +00:00
Oleksandr Tymoshenko
9f69e6bdb1 Make lockstat and profile modules x86-only 2012-03-24 05:15:14 +00:00
Oleksandr Tymoshenko
c57e9d4e83 Add device part of DTrace/MIPS code 2012-03-24 05:14:37 +00:00
Oleksandr Tymoshenko
5083ce5c09 Add MIPS support to cddl/contrib part:
- header and stub .c file for fasttrap module. It's not supported on
    MIPS yet, but there is no way to disable support completely
- Do as amd64 trying to limit allocated memory
2012-03-24 04:52:18 +00:00
Marius Strobl
24a0e7eeab As it turns out, mpi_cnfg.h already is included by mpt.h. 2012-03-24 00:37:56 +00:00
Marius Strobl
fd61f4215c - Use the PCI ID macros from mpi_cnfg.h rather than duplicating them here.
Note that this driver additionally probes some device IDs for the most
  part not know to other MPT drivers, if at all. So rename the macros not
  present in mpi_cnfg.h to match the naming scheme in the latter and but
  suffix them with a _FB in order to not cause conflicts.
- Like mpt_set_config_regs(), comment out mpt_read_config_regs() as the
  content of the registers read isn't actually used and both functions
  aren't exactly up to date regarding the possible layouts of the BARs
  (these function might be helpful for debugging though, so don't remove
  them completely).
- Use DEVMETHOD_END.
- Use NULL rather than 0 for pointers.
- Remove an unusual check for the softc being NULL.
- Remove redundant zeroing of the softc.
- Remove an overly banal and actually partly incorrect as well as partly
  outdated comment regarding the allocation of the memory resource.

MFC after:	3 days
2012-03-24 00:30:17 +00:00
Oleksandr Tymoshenko
27f3b996d0 Add define for MIPS.options 2012-03-23 22:52:23 +00:00
Mikolaj Golub
903712c99c Add a sysctl to set and retrieve binary osreldate of another process.
Suggested by:	kib
Reviewed by:	kib
MFC after:	2 weeks
2012-03-23 20:05:41 +00:00
Bernhard Schmidt
ada977b103 Use suspend/resume methods provided by net80211. This ensures that the
appropriate state handling takes place, not doing so results in the
device doing nothing until manual intervention.

Reviewed by:	iwasaki
Tested by:	iwasaki (iwi)
MFC after:	4 weeks
2012-03-23 19:32:30 +00:00
Oleksandr Tymoshenko
2a4f7a57fe Fix pmap_kextract prototype to align it with pmap.c change 2012-03-23 18:07:12 +00:00
Jim Harris
7ccd203639 Call xpt_bus_register during attach context, then freeze and do not release
until domain discovery is complete.  This fixes an isci(4) bug on FreeBSD 7.x
where devices weren't always appearing after boot without an explicit rescan.

Sponsored by: Intel
Reported and tested by: <rpokala at panasas dot com>
Reviewed by: scottl
Approved by: scottl
2012-03-23 16:28:11 +00:00
John Baldwin
d02a6470bf Don't cast a bus address to a uint8_t pointer just to add an offset to
it.  Instead, add the offset directly to the bus address.
2012-03-23 12:34:39 +00:00
Dimitry Andric
3b5683fce6 Work around the following clang warning in mps(4):
sys/dev/mps/mps_sas.c:861:1: error: function 'mpssas_discovery_timeout' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
  mpssas_discovery_timeout(void *data)
  ^

Because the driver is obtained from upstream, we don't want to modify
it; just silence the warning instead, it is harmless.

MFC after:	3 days
2012-03-23 11:35:01 +00:00
Andrey V. Elsukov
472794bb9f Check that scheme is not already registered. This may happens when a
KLD is preloaded with loader(8) and leads to infinity loops.

Also do not return EEXIST error code from MOD_LOAD handler, because
we have undocumented(?) ability replace kernel's module with preloaded one.
And if we have so, then preloaded module will be initialized first.
Thus error in MOD_LOAD handler will be triggered for the kernel.

PR:		kern/165573
MFC after:	3 weeks
2012-03-23 07:26:17 +00:00
Oleksandr Tymoshenko
f86a93b5be Add pseudo-device for handling PMC interrupts and link everything
PMC-related to build
2012-03-23 00:11:54 +00:00
Oleksandr Tymoshenko
4db6447467 Add Octeon PMC hardware backend 2012-03-23 00:09:27 +00:00
Oleksandr Tymoshenko
370df5bc87 Add list of Octeon's PMC counters obtained from cvmx-core.h 2012-03-23 00:04:09 +00:00
Oleksandr Tymoshenko
d8a2d243bf Add Octeon class and CPU type 2012-03-23 00:03:26 +00:00
Oleksandr Tymoshenko
ae849c7c42 Setup fake MODINFO variables for octeon kernel 2012-03-23 00:01:09 +00:00
Adrian Chadd
12be5b9c59 Add some further debugging to try and aid tracking down what the state of
things were just before a full software queue is drained.
2012-03-22 21:48:36 +00:00
Adrian Chadd
d780702e8b Sprinkle some style(9) things around. 2012-03-22 21:47:14 +00:00
Rafal Jaworowski
4350d77706 Improve FDT handling in loader(8) and make it more robust.
o Fix buffer overflows when using a long property body in node paths.
o Fix loop end condition when iterating through the symbol table.
o Better error handling during node modification, better problem reporting.
o Eliminate build time warnings.

Submitted by:	Lukasz Wojcik
Obtained from:	Semihalf
MFC after:	1 week
2012-03-22 20:34:26 +00:00
Oleksandr Tymoshenko
1b930fb786 Rework MIPS PMC code:
- Replace MIPS24K-specific code with more generic framework that will
    make adding new CPU support easier
- Add MIPS24K support for new framework
- Limit backtrace depth to 1 for stability reasons and add option
    HWPMC_MIPS_BACKTRACE to override this limitation
2012-03-22 18:01:23 +00:00
Oleksandr Tymoshenko
a5fbfee1d0 Move PMC hook invocation to cpu_intr. The idea is the same as with ast()
call but there is no reason to implement it in assembler.
2012-03-22 17:47:52 +00:00
Oleksandr Tymoshenko
2d57314a1b Fix PMC syscall on 64-bit big endian systems.
Sycall argument is pointer to array of register_t values. Casting it to
pointer to structure with fields of size smaller then register_t we rely
on compiler-dependent memory layout of structure.

Tested on: mips64 and amd64 systems
2012-03-22 17:36:53 +00:00
Jung-uk Kim
cc6455afff Add ACPI_LV_REPAIR debug level, available since ACPICA 20091214 (r200553).
MFC after:	3 days
2012-03-22 17:01:25 +00:00
Michael Tuexen
b5b6e5c237 Small cleanup of the code. No functional change (in FreeBSD kernel).
MFC after: 1 week.
2012-03-22 16:22:16 +00:00
Joel Dahl
f38f12f287 Add snd_cmi, snd_csa and snd_emu10kx to GENERIC on i386 and amd64.
The GPL infected parts which were blocking the inclusion of snd_csa
and snd_emu10kx in GENERIC have recently been removed from the tree.
I'm also adding snd_cmi to GENERIC, which I originally intended to
add when we enabled sound support by default.

Discussed with:	jhb, pfg, Yuriy Tsibizov <yuriy.tsibizov@gfk.ru>
Approved by:	jhb
2012-03-22 16:19:04 +00:00
Jayachandran C.
0e37e252d2 Fix return type of mips pmap_kextract()
The return type should be vm_paddr_t, not vm_offset_t.
2012-03-22 15:14:10 +00:00
John Baldwin
d8c827012c Mark the 'lapics' and 'ioapics' arrays here static since they are
private to this file.  The 'lapics' array was actually shadowing a
completely different 'lapics' array that is private to local_apic.c.

Reported by:	bde
MFC after:	2 weeks
2012-03-22 12:23:32 +00:00
Andrey V. Elsukov
5b0da85a41 Correct debug message. 2012-03-22 09:29:07 +00:00
Alan Cox
5730afc9b6 Handle spurious page faults that may occur in no-fault sections of the
kernel.

When access restrictions are added to a page table entry, we flush the
corresponding virtual address mapping from the TLB.  In contrast, when
access restrictions are removed from a page table entry, we do not
flush the virtual address mapping from the TLB.  This is exactly as
recommended in AMD's documentation.  In effect, when access
restrictions are removed from a page table entry, AMD's MMUs will
transparently refresh a stale TLB entry.  In short, this saves us from
having to perform potentially costly TLB flushes.  In contrast,
Intel's MMUs are allowed to generate a spurious page fault based upon
the stale TLB entry.  Usually, such spurious page faults are handled
by vm_fault() without incident.  However, when we are executing
no-fault sections of the kernel, we are not allowed to execute
vm_fault().  This change introduces special-case handling for spurious
page faults that occur in no-fault sections of the kernel.

In collaboration with:	kib
Tested by:		gibbs (an earlier version)

I would also like to acknowledge Hiroki Sato's assistance in
diagnosing this problem.

MFC after:	1 week
2012-03-22 04:52:51 +00:00
Alan Cox
bfb2fa9f00 Change pv_entry_count to a long. During the lifetime of FreeBSD 10.x,
physical memory sizes at the high-end will likely reach a point that
the number of pv entries could overflow an int.

Submitted by:	kib
2012-03-22 04:40:22 +00:00
Marius Strobl
cc0c154ffb Declare the CRC lookup-tables const as they hardly should change at
run-time.
2012-03-21 20:55:21 +00:00
Marius Strobl
3e18d022e4 Use the common/shared CRC-32 implementation instead of duplicating it.
MFC after:	1 week
2012-03-21 20:53:47 +00:00
Bernhard Schmidt
74ebfba7ca Update the firmware to version 0.236
Submitted by:	PseudoCylon
MFC after:	2 weeks
2012-03-21 19:09:52 +00:00
Bernhard Schmidt
f9d032660b Load the firmware during init not attach, as a root filesystem might
not yet be available. While here, also print the firmware version.

Submitted by:	PseudoCylon
MFC after:	3 days
2012-03-21 19:08:44 +00:00
Marius Strobl
5187458fcd - First pass at const'ifying ata(4) as appropriate.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers

MFC after:	1 week
2012-03-21 16:59:39 +00:00
Juli Mallett
ce30db0b31 o) Don't keep drive parameters in a global, put them in the softc.
o) Don't report a bogus stripesize.
o) Eliminate a nearby gratuitous "proxy" indirection.
2012-03-21 10:27:12 +00:00
Andrey V. Elsukov
c5e7f0649a Acquire modules lock before call module_getname() in the KLD_DEBUG case.
MFC after:	1 week
2012-03-21 09:48:32 +00:00
Marius Strobl
812e6f1cf5 Remove remnants of ATA_LOCKING uses in the ATA_CAM case and wrap it
along with functions, SYSCTLs and tunables that are not used with
ATA_CAM in #ifndef ATA_CAM, similar to the existing #ifdef'ed ATA_CAM
code for the other way around. This makes it easier to understand
which parts of ata(4) actually are used in the new world order and
to later on remove the !ATA_CAM bits. It also makes it obvious that
there is something fishy with the C-bus front-end as well as in the
ATP850 support, as these used ATA_LOCKING which is defunct in the
ATA_CAM case. When fixing the former, ATA_LOCKING probably needs to
be brought back in some form or other.

Reviewed by:	mav
MFC after:	1 week
2012-03-21 08:57:15 +00:00
Marius Strobl
02c2b7d963 Exclude devices which are mutually exclusive with ATA_CAM. For better
or worse, the former are still built as modules as part of the LINT
builds

Reviewed by:	mav
MFC after:	1 week
2012-03-21 08:50:47 +00:00
Gleb Smirnoff
d0e6c546a2 in6_pcblookup_local() still can return a pcb with NULL
inp_socket. To avoid panic, do not dereference inp_socket,
but obtain reuse port option from inp_flags2, like this
is done after next call to in_pcblookup_local() a few lines
down below.

Submitted by:	rwatson
2012-03-21 08:43:38 +00:00
Ed Schouten
92396a3174 Remove pty(4) from our kernel configurations.
As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.
2012-03-21 08:38:42 +00:00
Alan Cox
d43d9d104d Eliminate vm.pmap.shpgperproc and vm.pmap.pv_entry_max because they no
longer serve any purpose.  Prior to r157446, they served a purpose
because there was a fixed amount of kernel virtual address space
reserved for pv entries at boot time.  However, since that change pv
entries are accessed through the direct map, and so there is no limit
imposed by a fixed amount of kernel virtual address space.

Fix a couple of nearby style issues.

Reviewed by:	jhb, kib
MFC after:	1 week
2012-03-21 04:00:58 +00:00
Adrian Chadd
dc1f12bf69 Re-commit this - store the alq payload in network order. 2012-03-21 03:19:50 +00:00
Jung-uk Kim
4c52cad2f9 Merge ACPICA 20120320. 2012-03-20 21:37:52 +00:00
Jung-uk Kim
038de96387 Fix another witness panic. We cannot enter critical section at all because
AcpiEnterSleepState() executes (optional) _GTS method since ACPICA 20120215
(r231844).  To evaluate the method, we need malloc(9), which may sleep.

Reported by:	bschmidt
MFC after:	3 days
2012-03-20 20:37:23 +00:00
John Baldwin
46c57c8d2b Add sys/ofed to the 'make cscope' target.
MFC after:	1 week
2012-03-20 18:05:15 +00:00