more obvious imprecision in the previous top changes.
Specifically, top uses a delta of clock_gettime() calls right after
invoking the kern.proc sysctl to fetch the process/thread list to
compute the time delta between the fetches. However, the kern.proc
sysctl handler does not run in constant time. It can spin on locks,
be preempted by an interrupt handler, etc. As a result, the time
between the gathering of stats for individual processes or threads
between subsequent kern.proc handlers can vary. If a "slow" kern.proc
run is followed by a "fast" kern.proc run, then the threads/processes
at the start of the "slow" run will have a longer time delta than the
threads/processes at the end. If the clock_gettime() time delta is
not itself skewed by preemption, then the delta may be too short for
a given thread/process resulting in a higher percent CPU than actual.
However, there is no good way to calculate the exact amount of overage,
nor to know which threads to subtract the overage from. Instead, just
punt and fix the definitely-wrong case of an individual thread having
more than 100% CPU.
Discussed with: zonk
Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This variable allows the loading of shared libraries via directory descriptors
rather than via library paths. If LD_LIBRARY_PATH_FDS=3:4:12, the directories
represented by file descriptors 3, 4 and 12 will searched for shared libraries
before the normal path-based mechanisms are used. This allows us to execute
unprivileged binaries from within a Capsicum sandbox even if they require
shared libraries.
Approved by: rwatson (mentor)
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
Use of reallocf is useful in libraries as we are not certain the
application will exit after NULL.
This somewhat reduces portability but if since you are building
this as part of libc it is likely you have our non-standard
reallocf(3) already.
Reviewed by: ache
MFC after: 5 days
reporting IP-addresses to the peer during the handshake, adding
addresses to the host, reporting the addresses via the sysctl
interface (used by netstat, for example) and reporting the
addresses to the application via socket options.
This issue was reported by Bernd Walter.
MFC after: 3 days
separate argument structure with added level_type field for
CPUID_CPUID_COUNT request.
Reviewed by: attilio (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
map entries list, and that it does not overlap with the previous and
next entries.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Assume the number of description used is reasonable value to
increment this otherwise opaque field by.
While here, reduce a minor difference between the legacy and
multiqueue transmit paths.
MFC after: 1 week
This requires the VMware vmxnet3 device to flip the start of packet
descriptor's generation before the rest of the packet's descriptors
have been loaded into the Rx ring. I've never observed this behavior,
and it seems to make the most sense not to do it this way. But it is
not a lot of work for the driver to handle this situation just in case.
MFC after: 1 week
The sbp_cam_detach_target can be called from sbp_post_explore function
on the first target that is not really attached and it was written with
the corresponding safety check in place to tolerate that. Unfortunately
the recent locking cleanup did add a locking assertion that tries to
dereference the target->sbp pointer unconditionally, which causes less
than desirable outcome. Since the assertion is useful, just initialize
the target sbp pointer once when sbp device is being initialized instead
of when the target is being attached. This makes assertion work in all
cases and fixes the crash on boot.
performing cpuid calls.
Add also a new way to specify the level type to cpucontrol(8) as
reported in the manpage.
Sponsored by: EMC / Isilon storage division
Reviewed by: bdrewery, gcooper
Testerd by: bdrewery
Before this it was impossible to use all 16 bytes of serial number, and
client always got serial number NULL-terminated, that is not required.
MFC after: 2 weeks
instead of trying to cache it.
Previously, we only trusted the state if we did not have a cached state.
However, once a state was cached, the _STA method was always ignored.
Specifically, once a power resource had been turned on once (e.g.
during resume), the driver assumed it was always on even if _STA said it
was off and never turned it back on. This prevented the power resource
from being turned back on if a laptop was resumed twice, for example.
To fix, just remove the cached state entirely and always use the results
of _STA. The loops already skip any resources where _STA fails.
Submitted by: trasz (initial patch to invoke _ON)
MFC after: 1 week
corresponding flag(s) in the new map entry. Previously, the caller was
responsible for setting them after vm_map_insert() returned.
Pass MAP_STACK_GROWS_DOWN to vm_map_insert() from vm_map_growstack() when
extending the stack in the downward direction.
Together these changes slightly simplify the caller's task when creating a
downward growing stack. In particular, the caller no longer needs to clip
the previous entry, because the new stack entry can't possibly coalesce
with the previous entry.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
From one side it allows to remove CTL_FLAG_TASK_PENDING flag, handling of
which significantly complicates fine-grained locking. From the other side
it reduces task management requests latency even below then that flag could.
As downside, it denies task management code to sleep, but that is not needed
any way now.
Discussed with: ken
This should allow to abort commands doing mostly disk I/O, such as VERIFY
or WRITE SAME. Before this change CTL_FLAG_ABORT was only checked around
data moves, which for these commands may not happen for a very long time.
MFC after: 2 weeks
SPC-4 recommends T10 vendor ID based LUN ID was created by concatenating
product name and serial number (and istgt follows that). But product name
is 16 bytes long by itself, so 16 bytes total length is clearly not enough
to fit both.
To keep compatibility with existing configurations, pad short device IDs
to old length of 16, same as before.
This change probably breaks CTL user-level ABI, so control tools should
be rebuilt after this change.
MFC after: 2 weeks
we're now back to the pre-r228483 level of default verbosity. This in
turn again typically allows for reading information that userland might
have printed on the screen before initiating a halt, but still permits
to debug potential device shutdown problems on system shutdown via
CAM_DEBUG etc.
Reviewed by: mav
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
and prevents the request from deleting existing mappings in the
region, failing instead.
Reviewed by: alc
Discussed with: jhb
Tested by: markj, pho (previous version, as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Posix strptime() requires support for %t and %n, which were added
to the illumos port. Curiously we were skipping white spaces by
default in most other cases making %t meaningless.
We now skip spaces in the case of the %e specifier as strftime(3)
explicitly adds a space for the single digit case.
Reference:
http://pubs.opengroup.org/onlinepubs/009695399/functions/strptime.html
Obtained from: Illumos (Rev. a11c1571b6942161b0186d0588609448066892c2)
MFC after: 3 weeks
