Commit Graph

847 Commits

Author SHA1 Message Date
Bruce Evans
2ebd0c3795 Backed out rev.1.183, which had nothing to do with its log message.
It was to support a half-baked optimization of certain long long
divisions in gcc-2.8 and/or egcs.  We now avoid these divisions.
1998-06-16 14:55:27 +00:00
Bruce Evans
ea0be99955 Updated yet another ioctl, and put wst in LINT to inhibit further bitrot. 1998-06-08 06:18:53 +00:00
Julian Elischer
e256a933a8 Reverse the default sense of the IPFW/DIVERT reinjection code
so that the new behaviour is now default.
Solves the "infinite loop in diversion" problem when more than one diversion
is active.
Man page changes follow.

The new code is in -stable as the NON default option.
1998-06-05 22:40:01 +00:00
Jordan K. Hubbard
100047083e Add the DPT driver here. It's kinda ironic that it got enabled in -stable
first. :)
PR:		6848
1998-06-03 13:33:34 +00:00
Poul-Henning Kamp
5db3b83128 Add minimum driver for XC6200 based cards. Currently it knows about
the HOT1 from www.vcc.com.
1998-05-30 18:28:12 +00:00
Poul-Henning Kamp
e4062700c2 100 xrpu Xilinx Reprogrammable Processing Unit 1998-05-29 08:51:34 +00:00
Eivind Eklund
3933c622cd Move __FreeBSD_version from src/sys/conf/newvers.sh to
src/sys/sys/param.h, to facilitate access from the kernel.  This make
it possible to do outside kernel development and have it actually work
properly.
1998-05-21 19:21:46 +00:00
Bill Paul
e21faf3e33 And entries for ThunderLAN driver. 1998-05-21 03:22:20 +00:00
Eivind Eklund
94610ec47e Back out previous commit - it breaks when called from 'buildworld' :-(
(Damn, I wanted that in the -snap).
1998-05-20 20:54:10 +00:00
Eivind Eklund
a5eed7b873 Move __FreeBSD_version into <sys/param.h> (with automated duplication
to <osreldate.h>).  This allow kernel drivers access to it.

Approved by:	-current
1998-05-20 20:35:42 +00:00
Julian Elischer
0346e0fe04 Change the description of where to get the Soft Updates files. 1998-05-19 23:23:09 +00:00
Poul-Henning Kamp
58067a9909 Make the size of the msgbuf (dmesg) a "normal" option. 1998-05-19 08:58:53 +00:00
Dag-Erling Smørgrav
6110161faa Spotted a misplaced comma in my previous patch. 1998-05-16 14:10:12 +00:00
Dag-Erling Smørgrav
276756a441 Typo nits in SUIDDIR comment (removed some parentheses, moved some
commas, replaced "partition" with "filesystem", reformatted the
paragraph)
1998-05-16 14:08:31 +00:00
Jordan K. Hubbard
ea66042212 Name cronyx devices correctly. 1998-05-13 12:38:26 +00:00
Jordan K. Hubbard
56700fcbe6 Reserve major number 99 for vak's cronyx/tau serial driver. 1998-05-12 17:03:24 +00:00
John Dyson
5498a452bc Support better performance with P6 architectures and in SMP
mode.  Unnecessary TLB flushes removed.  More efficient
page zeroing on P6 (modify page only if non-zero.)
1998-05-11 02:13:47 +00:00
Mike Smith
795d035511 Add character major for 'loe' loopback pseudo-ethernet device.
Requested by:	sbabkin@dcn.att.com
1998-05-09 17:52:26 +00:00
Warner Losh
3f6c4fc33b Use ${.TARGET} rather than $@. i386 tested, pc98 untested because config
on my box doesn't grok machine type pc98.
PR:		3272
Submitted by:	jhs
1998-04-29 18:21:35 +00:00
Andreas Klemm
a2ba45e521 Fixes incorrect company and product names in uha(4) manpage and
LINT config file. Should be merged to -STABLE as well.
PR:		closes 6447
Submitted by:	Steven Plite splite@purdue.edu
1998-04-29 17:09:41 +00:00
Masafumi Max NAKANE
666cf86d3f Add "flags 0x10" to the sio0 entry so that SMP-GENERIC acts in thesame
manner as the GENERIC kernel to the -h option.
1998-04-29 06:58:43 +00:00
Matt Jacob
8bafc2452a Add support for the Qlogic ISP SCSI && FC/AL Adapters 1998-04-22 18:18:16 +00:00
Mike Smith
38f86230bd Add a block device entry for the 'myx' driver too. 1998-04-22 05:10:51 +00:00
Mike Smith
9c25a0b542 Add 'myx' for Ulf Zimmerman's Mylex Raid driver (ulf@alameda.net> 1998-04-22 03:57:07 +00:00
Julian Elischer
992109b58e Get rid of DEVFS_ROOT
it no longer has any effect.

SLICE is in some ways a replacement but is destined to also go away.
1998-04-20 04:30:47 +00:00
Julian Elischer
3e425b968d Add changes and code to implement a functional DEVFS.
This code will be turned on with the TWO options
DEVFS and SLICE. (see LINT)
Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes.

/dev will be automatically mounted by init (thanks phk)
on bootup. See /sys/dev/slice/slice.4 for more info.
All code should act the same without these options enabled.

Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others

This code does not support the following:
bad144 handling.
Persistance. (My head is still hurting from the last time we discussed this)
ATAPI flopies are not handled by the SLICE code yet.

When this code is running, all major numbers are arbitrary and COULD
be dynamically assigned. (this is not done, for POLA only)
Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
Amancio Hasty
9ff07e3256 Reviewed by: Amancio
Submitted by:	Roger Hardiman <roger@cs.strath.ac.uk>
Roger Hardiman <roger@cs.strath.ac.uk> :
	Revised autodetection code to correctly handle both
	old and new VideoLogic Captivator PCI cards.
	Added tsleep of 2 seconds to initialistion code for PAL users.
	Corrected clock selection code on format change.

--- Amancio
1998-04-18 04:58:33 +00:00
Julian Elischer
2720a2efd6 Reserve a number for the ALTQ control devices (96) 1998-04-17 20:26:43 +00:00
Dima Ruban
8b78465c27 Undo my last change. 1998-04-17 07:51:36 +00:00
Dima Ruban
d3b8e3673e Use 0440 root.kmem kermissions on kernel instead of
0555 root.wheel.

Reviewed by:	freebsd-security
1998-04-15 17:53:32 +00:00
Søren Schmidt
f559a836a2 Add the new LBA mode support in the wd? config examples. 1998-04-09 22:28:57 +00:00
Peter Wemm
e8b4f186cd add globals.s for data that is treated differently on SMP. 1998-04-06 15:49:35 +00:00
Wolfgang Helbig
94316d1ddb pcics are devices not controllers. 1998-03-29 07:58:03 +00:00
Peter Dufault
8a6472b723 Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and
_KPOSIX_PRIORITY_SCHEDULING options to work.  Changes:

Change all "posix4" to "p1003_1b".  Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;

Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;

Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;

Add options to LINT;

Minor fixes to P1003_1B code during testing.
1998-03-28 11:51:01 +00:00
Kazutaka YOKOTA
c4118fc0b0 Describe the SC_DISABLE_REBOOT option. 1998-03-24 02:55:03 +00:00
Peter Wemm
59088db3cb si driver has changed microcode file locations. 1998-03-23 16:44:22 +00:00
Peter Wemm
1689d8bdca Add IPFILTER, IPFILTER_LOG and note IPFILTER_LKM. 1998-03-21 14:13:47 +00:00
Peter Wemm
c0a3aab811 zap 'vector siintr' from example si0 config 1998-03-21 06:21:03 +00:00
Eivind Eklund
f909c15bec Clear up DPT comment to avoid further confusion. This is a hardware
driver.
1998-03-16 23:04:07 +00:00
Tor Egge
8f7030a7cc Add a BOOTP_WIRED_TO option, for use on machines with multiple network
cards where the first detected card should not be used for bootp.
Submitted by:	Doug Ambrisko <ambrisko@whistle.com>
1998-03-14 04:13:56 +00:00
Eivind Eklund
57a0e7b124 'LKM' is a minimal kernel config file, just enough to be able to test-link
the LKMs.
1998-03-12 20:00:21 +00:00
Julian Elischer
fdc021ba7f Add EISA support for DPT drivers
Submitted by: Matthew Dodd
Reviewd by:	shimon@simon-shapiro.org (DPT author)
1998-03-11 00:30:16 +00:00
Eivind Eklund
04fa1e6c8b Change PMAP_SHPGPERPROC to not be equal to the default, for the
benefit of bde's "unused include files" script.

Requested by:	bde
1998-03-10 15:42:13 +00:00
Eivind Eklund
005092bba6 Turn "PMAP_SHPGPERPROC" into a new-style option, add it to LINT, and
document it there.
1998-03-09 22:09:13 +00:00
Julian Elischer
b1897c197c Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman)
Submitted by:	Kirk McKusick (mcKusick@mckusick.com)
Obtained from:  WHistle development tree
1998-03-08 09:59:44 +00:00
Jun-ichiro itojun Hagino
751bf650a8 make sys/netkey/key{,_debug}.c compile. I believe it works but not tested.
I'll polish the code later on.
1998-02-27 10:02:49 +00:00
Jordan K. Hubbard
281bc0476a Move "geometry disk" device (not yet implemented) to major 95 to
eliminate conflict with /dev/pci.
1998-02-27 06:15:50 +00:00
Poul-Henning Kamp
828c63ae15 Add loran0 to LINT 1998-02-24 22:24:46 +00:00
Poul-Henning Kamp
cb7cfa353d Add the smallest and least useful device-driver by a fair margin... 1998-02-24 22:08:05 +00:00
Eivind Eklund
c2469addb2 Make TUNE_1542 a new-style option, and enable this option in LINT. It
has been disabled since 1994 by mistake (or at least I hope so :-)
1998-02-21 10:11:43 +00:00