Commit Graph

278 Commits

Author SHA1 Message Date
Peter Wemm
a5b996a7ec recording cvs-1.6 file death 1995-12-30 19:02:48 +00:00
Bruce Evans
92b86cc420 Removed bogus padding that wasted 0x500 bytes.
Improved code and comments.  Don't do anything except transfer control
in the head.o module.
1995-11-18 05:25:24 +00:00
Bruce Evans
a87c854a14 Fixed scrolling. The bottom line wasn't cleared. This caused the
boot to display "Booting the kernelel...done" instead of "Booting
the kernel".

Removed save and restore of BIOS memory.  kzipped kernels haven't
ever overlaid the BIOS memory.
1995-11-18 05:12:10 +00:00
Poul-Henning Kamp
cc066d80c4 Close PR misc/75. I thought this was done long time ago... 1995-11-06 17:28:31 +00:00
Andrey A. Chernov
1d5aafcd70 Add -fno-strength-reduce to neutralize possible bad effect of -O2
specified directly
1995-10-10 21:11:22 +00:00
Peter Wemm
c196603b4d Part 2 of the overlapping kzip changes.
Submitted by:	Gary Jones(?) <gj@freefall>
1995-10-06 02:57:26 +00:00
Poul-Henning Kamp
e8413d1db1 Make the netboot more tolerant about the config file. 1995-10-05 20:51:39 +00:00
Bruce Evans
72b3459d61 Add comments about the bogus zeroing of the drive number for floppies
and the bogus dummy partition table.
1995-09-16 13:51:20 +00:00
Bruce Evans
45c7e5044d Fix recent breakage of non-floppies with 36 sectors/track.
Disable support for not looking at the label when booting from fd2d
(15-sector floppies in drive 2) and fd2b (other floppies in drive 2).
1995-09-16 13:03:59 +00:00
Nate Williams
e21fd30049 When confronted with a drive that says there are 36 sectors/track,
ignore and set it to 18 sectors/track.  This allows FreeBSD to boot with
2.88MB floppies which are used in older ThinkPads.

Submitted by:	Random Net person whose name I lost
1995-09-16 05:02:37 +00:00
David Greenman
dd4e7c343b Killed unnecessary \r. 1995-09-07 21:11:34 +00:00
Julian Elischer
623463ca4a Cosmetic changes to make a comment more nearly reflect reality 1995-09-03 05:36:13 +00:00
Bruce Evans
826c5c4980 Convert \n to \r\n in serial_putchar(). 1995-08-26 20:03:43 +00:00
Paul Traina
abdd03a364 Clean up compilation warning. 1995-08-23 05:26:21 +00:00
Joerg Wunsch
ea76f9453e First part of importing the Japanese `od' driver.
Claim the major numbers (before sombedoy else jumps in again and
claims the slots for his foocd driver :-), install all the hooks that
are required.

While i've been at this, i've cleaned up some of the routines at the
end of i386/conf.c; all the importers of the latest CDROM drivers
forgot to fill in the appropriate information.  The `ata' driver
(vapourware?) does only occupy a slot in the bdevsw[] array, btw.

The actual import of the code does require a minor change in the SCSI
subsystem, and i want to have this reviewed by Peter first, so it will
be deferred for some days.  The driver is already working for me
though.

Submitted by:	akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1995-08-19 15:59:35 +00:00
Joerg Wunsch
75da8757fa Install kzip.o with BINMODE=444.
Submitted by:	graichen@sirius.physik.fu-berlin.de (Thomas Graichen)
1995-08-15 19:36:02 +00:00
Bruce Evans
9c0dc173cc Change install' to ${INSTALL}' so that default install flags can be
specified in the top level Makefiles.
1995-07-25 00:37:58 +00:00
Joerg Wunsch
f6027d9b3d this avaids the "lineoverflow" which you'll always get at 80 column
displays at bootup

Reviewed by:
Submitted by:	graichen@omega.physik.fu-berlin.de (Thomas Graichen)
Obtained from:
1995-07-22 22:32:49 +00:00
Joerg Wunsch
0f72d204e6 Reset defaults in case of boot() is looping several times (e.g. the
user has entered a bogus kernel name in the first place).

Also fix the broken #ifdef FORCE_COMCONSOLE, it has been disabled by
accident.  (NB: the keyboard probe remains disabled however.)

Few cosmetic fixes (declare functions to be void instead of int),
while i've been at this.

Pointed out by: wosch@cs.tu-berlin.de (Wolfram Schneider), for the init bug
1995-06-25 14:02:57 +00:00
Andrey A. Chernov
525cb41eb5 1) Enable boot from root partition which end > cyl 1023, it isn't criminal
2) Produce hard error when Bread attempts to read cyl >1023
Reviewed by: bde
1995-06-23 01:42:42 +00:00
Rodney W. Grimes
d3628763db Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Poul-Henning Kamp
13eb702447 Reduce the amount of bss the kzip stuff uses by moving big buffers into
the first Mb of memory.  Makes 4Mb machines more happy.
1995-05-29 01:38:07 +00:00
Poul-Henning Kamp
75e21a4e1e Now I could finally test this change: bad144 is now relative to the
partition.
1995-05-21 03:27:13 +00:00
Bruce Evans
ec0896af08 Reviewed by: phk
serial_putchar() always hung if it was called and the serial port existed,
so booting with -h hung when the above bug was fixed.  Previously, setting
-h did nothing but -h was sometimes the default due to the stack garbage
bug.
1995-05-17 07:39:43 +00:00
Bruce Evans
4061e47297 Reviewed by: phk
Submitted by:	DI. Christian Gusenbauer <cg@scotty.edvz.uni-linz.ac.at>

The `howto' arg to boot() was not supplied, so it was stack garbage (actually
the return address in the boot program).  I didn't use the submitted fix.
1995-05-17 07:37:53 +00:00
Poul-Henning Kamp
303fd456bf Use spc, not spt, DUH! Thanks Bruce!
Submitted by:	bde
1995-05-11 16:19:50 +00:00
Poul-Henning Kamp
0f15ab39ec Make disk.c smart enough to handle disk with "OnTrack Disk manager".
Make it complain if people try to boot from a partition which extends
past 1024 cylinders.  This is better than a random reset...
1995-05-08 02:02:56 +00:00
Poul-Henning Kamp
886b0df400 New and improved version from the author.
Submitted by:	DI. Christian Gusenbauer <cg@fimp01.fim.uni-linz.ac.at>
1995-04-27 18:22:36 +00:00
Julian Elischer
220112c567 Submitted by: bde@freebsd.org 1995-04-21 22:20:34 +00:00
Bruce Evans
8da0f3b87a Make some functions static like they always should have been.
Change the interfaces of these functions to save space.  The code
that takes the least amount of space is often the opposite to what
you might expect.  E.g., it helps to waste a few bytes passing
pointers so that the compiler can't see that certain addresses
are identical (gcc likes to waste space by reloading fat constants
even when the constant is already in a register).

Rewrite getbootdev() to save 80 bytes of space and to make it less
ugly.  32 bytes were saved simply by omitting the continue statements
in the pseudo-switch.
1995-04-21 16:50:32 +00:00
Bruce Evans
34951155ae Update the pseudo-prototype for serial_putc() to match the actual prototype. 1995-04-21 16:30:18 +00:00
Bruce Evans
a9ef92e638 Never pass char or short args to functions. This saves 64 bytes of
recently introduced bloat in just 2 calls to biosread(), although
very little in calls to putc() and serial_putc().  Gcc produces
amazingly bad code for unnecessary conversions.  E.g., if it has
`int x' in register %edx and wants to pass a char, then it could
simply push %edx and access only one byte in the callee.  Instead,
it sometimes unnecessarily spills %edx; it always sign extends
%edx and pushes the result.

Remove useless `extern' in function prototypes.

Remove unused declaration of `end'.

Declare pbzero() and pcpy() like the library bzero and bcopy().

Declare printf() properly.
1995-04-21 16:07:12 +00:00
Joerg Wunsch
9c6e0c69be . Make Poul's boot2 overflow warning less noisy in case the blocks
do fit, and beeping in case of an overflow.

.  Drop a comment about the ``FORCE_COMCONSOLE'' option into
   README.serial.

.  Increase the name buffer for the root directory from 100 bytes
   to 8 KB;  this is in no way ideal, but (IMHO) the best that can
   be done by now.  People did encounter problems with their root
   dir name listing overflowing the allocated buffer space.  Once
   we've got the three-stage boot, we should implement some basic
   malloc().  Swap space is already getting tight now, perhaps the
   swap should go into another 64 KB segment instead.

.  Make the keyboard probe less paranoid.  It should not give up in
   case of a keyboard that's continuously demanding RESEND's.  Even
   though the keyboard reset apparently has not been reported to be
   complete, it's at the very least proven that there IS something
   like a keyboard available.

   This solves problems with the ``Gateway-2000 AllKey programmable''
   (sp?) keyboard, that experienced a total hang with the previous
   probe.

   Thanks goes to Scott Blachowicz <scott@statsci.com> for his
   extensive testing of my various interim (debugging) bootblocks
   to get this working.
1995-04-20 23:15:10 +00:00
Julian Elischer
c9755763d9 Add an option to make it easy to default to the hd1 mode
also save a few bytes
1995-04-20 23:05:23 +00:00
Poul-Henning Kamp
3226e381f8 Added a check so compilation fails if the bootblocks are too big.
replaces a switch with ifs to reduce size.
1995-04-20 18:36:14 +00:00
Poul-Henning Kamp
16b560a716 Added -C option to set RB_CDROM, so that we use our cdrom as root. 1995-04-20 06:08:27 +00:00
Joerg Wunsch
afb7eb14a5 Remove the #ifdef REDUNDANT crud. This could be looked up in CVS by
interested parties.

Make the loader refuse to load anything below 1 MB -- we didn't
support it since FreeBSD 2.0R.  Avoid gratuitously wiping out the BIOS
variables or the loader.
1995-04-16 13:02:52 +00:00
Poul-Henning Kamp
6d7b3d3838 Added kzipboot 1995-04-15 08:24:33 +00:00
Poul-Henning Kamp
7970b29866 The magic code to uncompress a kernel.
Reviewed by:	phk
Obtained from:	Linux via 386BSD.
1995-04-15 08:23:55 +00:00
Poul-Henning Kamp
0fbb4a064b "jl" and "jb" doesn't quite do the same thing...
Reviewed by:	phk
Submitted by:	"DI. Christian Gusenbauer" <cg@scotty.edvz.uni-linz.ac.at>
1995-04-14 23:01:33 +00:00
Joerg Wunsch
15c99149f8 Boot block cleanup.
o Fix the keyboard probe to properly wait for the ready bit before
sending a command to the keyboard controller.  This should avoid the
problems some people are experiencing where the boot blocks hang the
system during keyboard probe.  (It does solve it for me.)

o Fix a bug that effectively prevented the boot blocks from ever
passing control to the serial console.  [while(--retries) instead of
while(retries--)]

o Gratuitously reduced the keyboard probe timeout from 500 to 5
seconds. :)

o Introduced a new option ``FORCE_COMCONSOLE'' as a commented-out
example in the Makefile, to force the usage of a serial console
regardless of a keyboard being connected or not.

o Moved all external declarations to boot.h, declared all functions
there, and ANSIfied all function declarations/definitions.
(printf() remains bogus, however -- i'm too lazy to fix this.)
We're in the ninetees, dunno why we should still support compilers
from the 70's.
1995-04-14 21:26:53 +00:00
Bill Paul
8a03631b28 According to a Usenet posting forward to me by Jordan, there's
at least one user out there who's system won't autoboot from the
serial console because of what sounds like 'phantom keystrokes'
making the timeout timer trip. I've tried to solve this by
adding an extra call to init_serial() right before the 'Boot:'
prompt is printed (done only if RB_SERIAL is set) to hopefully
make sure that the input buffer is clear. Unfortunately, the fellow
is in Germany and I haven't heard back from him yet. I haven't
been able to duplicate this problem on my hardware, so this is
a stab in the dark. At the very least, it shouldn't hurt anything.
1995-04-14 01:35:59 +00:00
Martin Renters
fd7e139eed Break netboot into device specific versions.
nb8390.[cr]om for NS8390 boards (if_ed driver)
nb3c509.[cr]om for 3c509 boards (if_ep driver)

Submitted by:	Serge Babkin (babkin@hq.icb.chel.su)  [3c509 support]
1995-04-12 20:15:33 +00:00
Bruce Evans
e1bc021264 Include <machine/cpufunc.h> to get i/o functions - don't duplicate almost
200 lines of code.
1995-04-01 16:08:58 +00:00
Bruce Evans
19b204bc85 Fix dependencies for netboot.rom. ${OBJS} isn't valid when the
dependencies are checked - it is set much later in bsd.prog.mk.

Add a comment about broken dependencies on options.
1995-04-01 16:03:25 +00:00
Jordan K. Hubbard
b32d3189e4 Diskless boot support for 3C509.
I'm not exactly sure why all the inb/outw stuff got added to netboot.h
and I'd be happy if someone like Martin or Bruce could take a look at it!
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-03-31 06:51:37 +00:00
Poul-Henning Kamp
c57e984258 Don't install /usr/mdec/boot
Install the biosboot as /usr/mdec/boot[12]
Make the traditional links from [swf]dboot and boot[swf]d to boot[12] files.
Install dosboot as /usr/mdec/boot/fbsdboot.exe
1995-03-28 19:22:43 +00:00
Poul-Henning Kamp
9346bafa46 And all serial chars with 0x7f to discard parity bits. 1995-03-19 06:10:32 +00:00
David Greenman
78dfa6036a Removed "-D" option and made symbols load all the time. They will be
discarded if the kernel isn't built with DDB.
1995-03-14 08:21:53 +00:00
Bill Paul
e8dfeb8828 Some people have complained that they were unable to boot the
Feb. 10th snapshot. The keyboard probe in the bootblock seems to
have been singled out as the cause of these problems, so I've beefed it
up alittle. This pushes us right up to the edge of the size limit:
the second stage boot is now 7152 bytes in size, just 8 bytes under
the wire. On the other hand, the new probe now does almost exactly
what syscons does, so hopefully this will do the trick. It seems
to work properly on my hardware, but then so did the old probe.
1995-03-02 21:00:14 +00:00
Bruce Evans
2987d72f4a Adjust for rearranged slice numbers. 1995-02-16 15:06:09 +00:00
Jordan K. Hubbard
6129798f6a Update this a little, though we probably need to either nuke or rename it! 1995-02-16 12:02:08 +00:00
Bill Paul
fbf23e9a0b Minor changes and additions to the serial README file. 1995-02-16 07:37:35 +00:00
Poul-Henning Kamp
b8e4cd2bb3 This is a MS-DOS program, but is does something useful for us:
It boots FreeBSD from a running MS-DOS system.

It's compiled using some MS-DOS tools, but there is a binary
hidden in the uuencoded file.  (Go ahead, flame me if you can come up
with a solution for the problem.  Just saying "this is bad" doesn't count!)

Rod, you were right: one would have to deal with weird interfaces to the
memory managers, and it seems that Christian found them all, and made them
work.

Thanks Christian!

Reviewed by:	phk
Submitted by:	DI. Christian Gusenbauer <cg@fimp01.fim.uni-linz.ac.at>

Christians README:
------------------

Hi Everybody!

This is version 1.5 of "fbsdboot", a program that allows you to boot a kernel
from a MS-DOS partition or a FreeBSD partition. This program runs using DOS.
It works with various memory managers (like  EMM386, 386MAX) under certain
circumstances.

First, a FreeBSD kernel is always loaded to memory starting at 0x100000. To
assure that loading the kernel *does not* overwrite memory used by memory
managers, high memory for the kernel is allocated and after loading the kernel
it's moved to 0x100000.

Second, there are many ways to switch to protected mode which is necessary to
start the kernel. Each BIOS gives you the possibility to use INT15H (AH=89H)
to do that. But some memory-managers like 386max does not allow you to use
this method.

An other way to do the switch is to use DPMI services, but they do not
guarantee, that the protected mode application is executed with privilege
level 0. Therefore this method is *not* used.

VCPI services offer another way to switch to protected mode, and VCPI servers
are built into "emm386.exe", "386max" and "qemm". That's why, this method is
implemented in fbsdboot.exe.

Fbsdboot.exe tries to switch to protected mode using VCPI services. If they're
not available INT15H is used to do the switch. If that fails, it's not possible
for this version of fbsdboot.exe to boot a kernel :-(.

You can get commandline options of fbsdboot if you start it with "-?" as option!

I don't know, if fbsdboot works with QEMM, as I don't have the possibility to
test it.

Enjoy and have fun!

Christian.
cg@fimp01.fim.uni-linz.ac.at


PS: Many thanks to Bruce Evans for his assistance!
1995-02-15 04:45:50 +00:00
Rich Murphey
73b2840c90 Reviewed by: Jordan
Submitted by:	Rich

Make conditionals on BIOSWAIT consistent with usage in io.c.

If you had 'BOOTWAIT=0' in your /etc/make.conf then biosboot wouldn't
compile.  It was '#if' in io.c and '#ifdef' in probe_keyboard.c so I
changed the latter to '#if'.

Even if BOOTWAIT is undefined then '#if BOOTWAIT' becomes
'#if 0' so it should compile either way with this change.
1995-02-15 04:17:59 +00:00
David Greenman
8710a63985 Get rid of extra []'s and otherwise fix-up boot prompt. Reordered
boot flags processing to be alpha-beta.
1995-01-28 03:51:39 +00:00
Bruce Evans
b5d89ca8ad Load the kernel symbol table in the boot loader and not at compile time.
(Boot with the -D flag if you want symbols.)

Make it easier to extend `struct bootinfo' without losing either forwards
or backwards compatibility.

ddb_aout.c:
Get the symbol table from wherever the loader put it.
Nuke db_symtab[SYMTAB_SPACE].

boot.c:
Enable loading of symbols.  Align them on a page boundary.  Add printfs
about the symbol table sizes.
Pass the memory sizes to the kernel.
Fix initialization of `unit' (it got moved out of the loop).
Fix adding the bss size (it got moved inside an ifdef).
Initialize serial port when RB_SERIAL is toggled on.
Fix comments.
Clean up formatting of recently added code.

io.c:
Clean up formatting of recently added code.

netboot/main.c, machdep.c, wd.c:
Change names of bootinfo fields.

LINT:
Nuke SYMTAB_SPACE.
Fix comment about DODUMP.

Makefile.i386:
Nuke use of dbsym.
Exclude gcc symbols from kernel unless compiling with -g.
Remove unused macro.
Fix comments and formatting.

genassym.c:
Generate defines for some new bootinfo fields.  Change names of old ones.

locore.s:
Copy only the valid part of the `struct bootinfo' passed by the loader.
Reserve space for symbol table, if any.

machdep.c:
Check the memory sizes passed by the loader, if any.  Don't use them yet.

bootinfo.h:
Add a size field so that we can resolve some mismatches between the loader
bootinfo and the kernel boot info.  The version number is not so good for
this because of historical botches and because it's harder to maintain.
Add memory size and symbol table fields.  Change the names of everything.

Hacks to save a few bytes:

asm.S, boot.c, boot2.S:
Replace `ouraddr' by `(BOOTSEG << 4)'.

boot.c:
Don't statically initialize `loadflags' to 0.  Disable the "REDUNDANT"
code that skips the BIOS variables.  Eliminate `total'.  Combine some
more printfs.

boot.h, disk.c, io.c, table.c:
Move all statically initialzed data to table.c.

io.c:
Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
Jordan K. Hubbard
8f998cf202 Y.A.B.M (Yet Another Bogus Makefile) 1995-01-24 00:41:50 +00:00
Bill Paul
f06a45ddd7 Removed hardcoded definition for RB_SERIAL that I left in my accident
(had it there for testing purposes). RB_SERIAL should be found in
<sys/reboot.h>.
1995-01-20 07:52:42 +00:00
Bill Paul
f778c9da00 Submitted by: Bill Paul (wpaul@ctr.columbia.edu)
Obtained from:
bios boot block changed to allow booting from both the attached graphics
display and from a serial port. (A specially compiled serial boot block
is no longer necessary.) The boot block should detect the presence or
absence of a keyboard: if there is no keyboard, COM1 is turned into the
console. This simulates the behavior of the Sun boot PROMs. Unplug your
keyboard, attach a terminal to COM1 and you should be ready to go. :)
1995-01-20 07:48:27 +00:00
Jordan K. Hubbard
00ed485bc4 Really provide support for 3COM cards now.
Submitted by:	wpaul
1994-12-31 17:16:50 +00:00
Bruce Evans
7010a8abed Save 16 bytes of data by not explicitly initializing to 0. 1994-12-30 07:48:07 +00:00
Joerg Wunsch
e72e8750d3 Insert a hook to initialize the serial port at the beginning of
boot().  This is needed so the "serialboot" stuff can share this file,
too.

Everything is #ifdef'ed so it evaluates to nothing when actually been
built in the "biosboot" directory.
1994-12-18 20:30:10 +00:00
Joerg Wunsch
2c681fc102 This became a frequently requested item now.
The files in this directory are modified version of "biosboot".  The
only difference is in that they perform their I/O via a serial port,
so their preferrable usage is to form bootblocks for systems where the
kernel happens to have an "options COMCONSOLE".  Most of the code is
actually shared with "biosboot", and make will not (and should not)
descend into this directory by default.  It is in the responsibility
of the user to build these bootblocks instead of the original ones.
1994-12-18 20:12:10 +00:00
Bruce Evans
bf67b544a2 Pass the slice number of the boot device to the kernel in the previously
unused bitfields for the adaptor and the controller.  It should go in
the bitfield for the partition but that would not be backwards compatible.
1994-12-18 19:14:19 +00:00
Poul-Henning Kamp
424183f2a4 Implement RB_VERBOSE. This is intended to mean: Print all information which
could be of any use for trouble-shooting problems with boot/devices/drivers.
1994-11-26 09:08:48 +00:00
Jordan K. Hubbard
9b1096e759 From: wpaul@ctr.columbia.edu (Bill Paul)
Subject: Mea culpa -- small fix for netboot fixes

In accordance with the unavoidable principle sof Murphy's Law, I discovered
that the fixes I recently contributed for the netboot code had some small
flaws in them. Two of them were just typos and had no effect on how the
program functioned. The other one was a missing line from the rootopts and
swapopts functions I created in bootmenu.c, which was supposed to initialize
the NFS sotype flag. It defaults to UDP, and you can change it to TCP with
the rootopts or swapopts commands, but then you can't change it back again.
I originally had a line at the top of each function to reinitialize this
flag, but somehow it got lost in the shuffle, probably because I don't
actually have a need for that flag yet.

Submitted by:	wpaul
1994-11-18 16:29:50 +00:00
Jordan K. Hubbard
8c05edbc74 Boy, was THIS buggered up! Calm the compiler by fixing the obvious
syntax errors.
1994-11-18 13:40:19 +00:00
Poul-Henning Kamp
66706b4367 Change the message a little bit... 1994-11-18 10:21:31 +00:00
Poul-Henning Kamp
b3c99fe3f3 one ) less. 1994-11-18 06:22:11 +00:00
Poul-Henning Kamp
efcdc34fe3 Ask the BIOS about the geometry, and tell the kernel about it. 1994-11-18 05:02:14 +00:00
Jordan K. Hubbard
68cbb04819 Many fixes from Bill Paul:
Smack the netboot program around so that it will allow the user to
  specify mount options.  [So that you can boot from a privileged port]

  Change the default boot image name in netboot to /kernel, then strip
  the leading slash when actually going out to get the NFS file handle.

  Added support for 3Com 3c503 cards. Also added another command to
  the (trans) that allows you to switch the 3Com's on-board transceiver
  on and off. (ether.c, ether.h, bootmenu.c)

  Modified the Makefile to support new compile-time options for 3c503
  cards:

  -DINCLUDE_3COM                Include support for 3c503
  -D_3COM_BASE=0x300            Define 3c503 base i/o address (if not
                                specified, 0x300 is the default)
  -D_3COM_USE_AUI               Disable the 3c503's transceiver by
                                default (without this flag the transceiver
                                is on by default)
1994-11-17 12:16:07 +00:00
David Greenman
3dea9c24ac Improved the user interface:
1) Added file list capability via '?'.
2) Arranged usage info to be more unix-like.
3) Fixed backspace over prompt annoyance.
1994-11-07 11:26:30 +00:00
Andrey A. Chernov
c897ebc21a Change -O2 to -O
With each gcc version -O2 can cause absolutely unpredicatable things
Second stage boot still fits in allowed size
1994-11-05 21:06:16 +00:00
Jordan K. Hubbard
2ee03071cb John Hay's patches to prevent missing gateway from dumping core.
Submitted by:	jhay
1994-11-01 22:12:35 +00:00
Jordan K. Hubbard
e84bf57e40 Expunge the stain I left upon this code. My '/' fix was utterly
bogus.  Thanks, Boyd!
1994-10-31 18:00:06 +00:00
Poul-Henning Kamp
0f5a69189b A new Makefile, which is more our kind of makefile.
Based on Martins makefile, made by Rod, briefly tested by me
1994-10-28 22:13:22 +00:00
Poul-Henning Kamp
cacd1ee89f Add netboot to the world of make. 1994-10-28 22:11:50 +00:00
Rodney W. Grimes
a5d34029d5 Removed extra slash between ${DESTDIR} and ${BINDIR}, noticed while working
on Makefile for netboot.
1994-10-28 07:54:13 +00:00
Poul-Henning Kamp
63f7a09266 Urg! the netboot/Makefile is in a miserable state. 1994-10-28 04:56:51 +00:00
Poul-Henning Kamp
1c6a0e235f This concludes the CVS-surgery. This makefile now just points at the subdir's. 1994-10-28 04:46:08 +00:00
Jordan K. Hubbard
dc6e5623e1 Gross hack to make kernel names not starting with '/' start with '/'. 1994-10-26 20:46:05 +00:00
Jordan K. Hubbard
9e8367bd7a Adjust boot message to conform to reality. 1994-10-26 20:22:10 +00:00
Jordan K. Hubbard
73ade464e2 Remove the code for asking for a filesystem floppy. We don't need
it anymore, and neither David nor I can think of a reasonable
mechanism to stick in its place.
1994-10-26 13:46:34 +00:00
Jordan K. Hubbard
aa20f6195d Add RB_CONFIG flag. 1994-10-26 13:18:49 +00:00
Poul-Henning Kamp
758eaab802 Found one of the show-stoppers in netboot... 1994-10-22 16:30:58 +00:00
Poul-Henning Kamp
049c88451b Some cosmetics in printfs mostly. 1994-10-22 04:23:12 +00:00
Poul-Henning Kamp
50edb6dded Martins latest changes. RFC1048 and swap-file should be in the game now.
Submitted by:	Martin Renters.
1994-10-19 20:25:37 +00:00
Poul-Henning Kamp
ac71bc2538 Added the final printf before jumping to the kernel. 1994-10-18 03:44:02 +00:00
Poul-Henning Kamp
232b94fe38 Made '?' do the same thing as help.
Fixed bug in netmask command.
Loads kernel fine.  I'm trying to get locore/autoconf to like the stuff.
1994-10-18 02:46:48 +00:00
Poul-Henning Kamp
4853df5bb0 Netboot TNG. I have seen this compile, I don't know if it works.
I have put it here, because I belive we could share some code among the
various kinds of boot-code, whenever we get the time to look at it.

Submitted by:	Martin Renters
1994-10-17 17:55:31 +00:00
Poul-Henning Kamp
da330b4225 $DESTDIR missing... 1994-10-15 03:59:19 +00:00
Andrey A. Chernov
24c989ac53 Change first CFLAGS+= to CFLAGS= or we got really bad results
especially with -m486 from make.conf
1994-10-07 05:36:01 +00:00
Rodney W. Grimes
9949ebf656 1. BOOTSEG and BOOTSTACK are now set from the Makefile, the boot code has
been relocated to run in the 64k segment at 0x10000 with the stack at
    the top of this segment.  This corrects the problems machines with 512K
    base memory had booting.

2.  startprog routing rewritten to convert the BOOTSEG ss to a KERNELSEG
    ss, this eliminated the last of the >512K memory references.  Additional
    cleanup in here included a better way to copy the arguments to the
    kernel stack.

3.  Elimination of argv and esym cruft saved a few bytes.

4.  Only need to truncate the head.a_entry to a meg boundary once intead
    of every time we used it!  [Saving more bytes].

5.  Addition of version 1 bootinfo structure support.  These boot blocks
    pass the kernel name in to the kernel now.

6.  Removed historical comments about MACH argv stuff, as it is useless now.
1994-10-06 09:41:05 +00:00
Rodney W. Grimes
12fafb2d5a 1. Completely rewritten Makefile that uses bsd.prog.mk more effectively.
2.  Clean up the .S files to use /* */ style comments.

This is a totally cosmetic change, not one byte of the resulting boot
code changes.  But at least it is installed with correct owners and in
the right places, and gets recompiled correctly when things change!
1994-10-02 05:18:26 +00:00
Adam David
f89971dfe7 Better documentation, 1ms calibration, default 5 seconds BOOTWAIT
Reviewed by:	adam
Submitted by:	rgrimes
1994-09-20 22:25:00 +00:00
Adam David
fcf8309d74 Default wait approx 10 seconds for keypress during boot
Added comment about multiplication factor
1994-09-19 19:54:49 +00:00
Steven Wallace
893f3712e5 Put LDDESTDIR before library listing. 1994-09-18 19:10:11 +00:00
Steven Wallace
dfc5d1d4eb Makefile: add ${LDDESTDIR} to linking of boot code so ${DESTDIR}/usr/lib
is used instead of /usr/lib

io.c: add #include <machine/cpufunc.h> as instructed by David Greenman to
avoid inb/outb linking errors.
NOTE:  I just discovered that if GNUC is not used the inline functions will not be expanded from the include file and real inb/outb functions would
be needed.
1994-09-18 07:39:55 +00:00
David Greenman
df9ab3049d Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from
systm.h). Merged functionality of pio.h into cpufunc.h. Cleaned up some
related code.
1994-09-16 13:33:56 +00:00
Bruce Evans
2c22dd40a2 Conditionalize support for my debugger. This normally saves 304 bytes. 1994-08-30 01:38:04 +00:00
Paul Richards
c4350ddb46 Removed disk type from disklabel lines, not needed for installing
bootblocks.

Reviewed by:
Submitted by:
1994-08-21 18:15:45 +00:00
Paul Richards
b95ed23990 Fixed bootblocks to work with FreeBSD 2.0
1) Fixed up some header locations
2) Replaced list of boot files with /kernel
3) Changed disklabel use in Makefile to conform to 4.4
4) Added size command in Makefile to get close estimate of bootblock
   sizes. Total size of text and data must be below 64K, slightly
   overestimated since a.out header subsequently gets stripped.
5) Various buffer sizes are set to 8192 bytes in sys.c. In 4.4 MAXBSIZE
   is set to 64K which is too big for the bootblocks to deal with.

Submitted by:	Paul Richards
1994-08-21 17:47:26 +00:00
Jordan K. Hubbard
1c28e35f68 Commit a whole cluster of last minute critical (and one cosmetic) fixes
from David Greenman, Bruce Evans and Julian Elischer.

They are:

[vnode pager - David/Bruce]:
  The following patch fixes a problem where some data could be lost in a
delayed-write buffer if the cached buffer was larger than a page. This fix was
provided by Bruce Evans and modified slightly by me.

[st.c - Julian]:
  My fix for "bad request, must be between 0 and 0"

RTFS if you're interested).

[gnu/fpemul - David/Bruce]:
  These changes fix single stepping of emulated FPU instructions.
Previously, the instruction after an emulated instruction was
executed without causing a SIGTRAP ...

The also fix the initial control word being different for the
GPL emulator (it is still wrong for the old emulator) and remove
an unnecessary panic when emulation is not configured (I hope at
least init, sh and reboot will run without floating point.  I
remember only df and mkfs being broken by the lack of FP in 0.0).

[Various fixes described below - Bruce/David]:
sys/i386/boot/boot2.S:
        Yet another attempt to propagate the correct fix for 16 vs
        32-bit mode bugs.  [verified]

sys/i386/i386/db_interface.c:
        Protect against reentering Debugger().

sys/kern/kern_time.c:
        Don't allow 'time.tv_usec == 0' except at clock interrupts.

sys/pcfs/pcfs_fat.c:
        Make it compile without -O.

sys/scsi/sd.c:
        Fix as posted to some freebsd mailing list.
        (changes the order of the assignment of "sectors" because it earlier
          value is needed first -DG)

sys/vm/vm_glue.c:
        Fix stale comments and verbose code.

sys/vm/vm_mmap.c
        Fix off by 1 errors and verbose code.

[From Nate - cosmetic but non-intrusive and useful enough to go in]
sys/i386/isa/isa.c:
Appended you'll find a patch to the NMI error log routine in isa/isa.c.
The below patch just adds some additional information when an NMI occurs
which can help debug the hardware problem.
1994-06-22 05:52:25 +00:00
Jordan K. Hubbard
2e2df8360c Make BOOTWAIT a truly tunable parameter. It was hard-set before. 1994-06-20 04:32:40 +00:00
Adam David
3f9e73d24f Changed delay mechanism to rely more on I/O spinning. If spinning on the
like this is bad news, it will have to be revised.
Shortened some verbose messages for when the kernel is loaded below 640k.
Updated version number.
1994-06-16 03:53:29 +00:00
Jordan K. Hubbard
f4c5931839 From Hellmuth Michaelis, reviewed by Bruce Evans: This enables
the keyboard clock rather than incorrectly disabling it.
1994-06-15 19:09:14 +00:00
Adam David
f675355835 make BOOTWAIT loopcount parameter available for tuning.
This changes nothing unless f.e. -DBOOTWAIT=0 or -DBOOTWAIT=640000 is used
1994-06-15 18:15:17 +00:00
Rodney W. Grimes
f2009cbfdb Touch the $Revision$ string to cause a cvs revision update of the boot
code (ie, should now print Revision 1.13).
1994-06-14 07:31:42 +00:00
Jordan K. Hubbard
ac9326b3cc Be paranoid about setting of %dl register for braindead BIOS's,
initializing it to 0 in the floppy boot case.  This allows my Toshiba
1910 laptop to finally boot, and may help out other machines cursed
with early Phoenix BIOS's as well.
1994-06-13 19:27:52 +00:00
Jordan K. Hubbard
9727866aa8 This should fix up the absolute paths to /usr/mdec - just prepended
${DESTDIR} to all the right places (any reason why not?).
1994-06-02 16:50:56 +00:00
Andrey A. Chernov
03afa5ecd8 Make bootblocks fit into 7168 limit 1994-05-30 05:23:53 +00:00
Andrey A. Chernov
7b5cad487c From Bruce:
*	If there is no 386BSD partition, initialize the label sector with
 *	LABELSECTOR instead of with garbage.
 *	Fixed reading of bad sector table.  It is at the end of the 'c'
 *	partition, which is not always at the end of the disk.
1994-05-16 03:06:00 +00:00
Martin Renters
0eb0343191 Change switch statement to two if statements. This saves 208 bytes in
the object file which is enough to bring the size down to the point
where the bootstrap fits into 15 sectors.
1994-05-01 03:53:29 +00:00
Poul-Henning Kamp
13042d1278 Adding bootoption '-r' which is "use compiled in root". This allows me to
boot from a floppy and have root on wd2 for instance.
1994-04-20 22:06:24 +00:00
Rodney W. Grimes
9ad564373e Bump boot block revision to 1.9 by a dummy edit on disk.c and:
>From: bde@kralizec.zeta.org.au (Bruce Evans)
Subject: cache botch in bootstrap
Date: Sun, 20 Feb 94 18:14:35 +1100
The cache in the bootstrap loader didn't allow for the device changing.

This caused surprisingly little trouble - the cache is only for a single
track (or part of a track), and the first access to a new device is
always for an early sector, so there is no problem unless the last access
to the old device was for an early sector.  I saw the problem on a system
with BSD on wd1 and no label on wd0.  Everything worked if the the device
name wd(1,a) was specified before the default of wd(0,a) was tried, but
when the default was tried, it failed on the first sector because there
was no label, and then the first sector on wd0 was always used instead
of the first sector on wd1, so there was apparently no label on wd1
either.

Bruce
1994-02-22 22:59:40 +00:00
Andreas Schulz
908cd9251b Deleted the private cleandir target. It didn't had a rule for the
obj symlink in it and the normal bsd.prog.mk cleandir target does
already the correct thing.
1993-12-11 20:35:15 +00:00
Andrey A. Chernov
6683327ab0 We don't want shared boot, so -Bstatic added to ld options 1993-11-16 02:02:05 +00:00
Rodney W. Grimes
9518d3aea0 >From Charles Hannum
Change movl %es: -2(reg) to use a subl $2,reg when fixing up the IDT
entries for bdb.  This seems to be the best way to go.

Some day soon #ifdef BDB all of Bruces debugger code.
1993-11-13 04:43:25 +00:00
Rodney W. Grimes
dd05fde699 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 19:17:18 +00:00
Rodney W. Grimes
6de3bf82d0 Dont just mask the Megabyte, we need all the bits below too,
and ELIMITNATE THE 28K BOGOUSITY.
1993-10-15 12:33:03 +00:00
Rodney W. Grimes
64e154d67b Fixed the options hd(1,... to be more accurate (removed word options it
now reads:

printf("use hd(1,a)/386bsd to boot sd0 when wd0 is also installed\n");

I know the person wanted more explination, but there is little room in
the boot blocks for verbose text!
1993-10-11 02:43:42 +00:00
Christoph Robitschko
950d93597c Changed the "Insert filesystem floppy" prompt to give the user a choice in
which drive he wants the root file system (A or B).
1993-10-09 08:31:39 +00:00
Rodney W. Grimes
bb9b7f49b4 Remove the ``loader overlaps bss, kernel must bzero'' printf since that
is so often reported as an error condition when it is not.  We print the
size of things so for those who want to know if this happened they can
figure it out from the size information that is printed.
1993-10-08 20:19:23 +00:00
Rodney W. Grimes
6d36c167f4 Changed header from 386BSD BOOT to FreeBSD BOOT. 1993-07-16 13:06:08 +00:00
Charlie Root
f7710986e2 New boot blocks, from Bruce Evans, and NetBSD fixes. Allows kernel to
be loaded above 1MB.  Same boot code for floppies now.  Speed improvements.
etc etc etc. (I don't have much history on this, but then have been tested)
1993-07-13 18:15:32 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00