For non-ERMS case the code used handle possible trailing bytes with
movsb first and then followed it up with movsq. This also happened
to alter how calculations were done for other cases.
Handle the tail with regular movs, just like when copying forward.
Use leaq to calculate the right offset from the get go, instead of
doing separate add and sub.
This adjusts the offset for non-rep cases so that they can be used
to handle the tail.
The routine is still a work in progress.
Sponsored by: The FreeBSD Foundation
we were looking at the original URL rather than the one we were currently
processing. This meant that if we were trying to retrieve an HTTP URL but
were redirected to an HTTPS URL, and HTTPS proxying was enabled, we would
send an invalid request and most likely get garbage back.
MFC after: 3 days
from setting the volume serial number. This unbreaks older boot blocks
that don't support serial numbers, and allows boot0cfg to set the serial
number itself if requested by the user.
Submitted by: lev@, yuripv@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17386
There is probably a PR for this, but I can't find this, or remember who
submitted it. The patch got lost in the noise of another that wasn't
ready to commit.
MFC after: 3 days
When immediate bind mode is requested, as of r340675 rtld processes
irelocs in PLT immediately after other PLT relocs. That addresses the
libc + BIND_NOW startup crash the workaround is no longer needed.
PR: 233333
Until this commit libedit only supported UTF-8 for multibyte charset
Improve it to support other multibyte charsets
Tested with eucJP and SJIS charsets.
Note that this change as been review and committed in upstream libedit
as well via christos@NetBSD
Submitted by: naito.yuichiro _at_ gmail.com
Reviewed by: bapt, pfg, yuripv, 0mp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17903
As with r328939 we need to mark local symbols as such. Without this the
assembly parser treats the symbols as global and created relocations
against these private symbols.
MFC with: r339738
Sponsored by: DARPA, AFRL
Matcher function incorrectly assumed that moffset that we get from
findmust is in bytes. Fix this by introducing a stepback function,
taking short path if MB_CUR_MAX is 1, and going back byte-by-byte,
checking if we have a legal character sequence otherwise.
PR: 153502
Reviewed by: pfg, kevans
Approved by: kib (mentor, implicit)
Differential revision: https://reviews.freebsd.org/D18297
Those two manual pages are already referencing each other in the HISTORY
sections, which people might skip. Mention those manual pages explicitly in
the SEE ALSO sections. Also, remove a reference to be(1) from libbe(3).
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18136
As requested by a TODO in the source code.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18063
This note will be used to allow binaries to opt out of, or in to,
upcoming vulnerability mitigation and other features. It is not yet
connected but being added now to facilitate testing and ensure
compatibility with existing kernels and tools.
Reviewed by: brooks, jhb, kib, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17438
That avoids a syscall - getpagesize(3) gets the value from the ELF
aux strings.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17989
Building libc WITH_BIND_NOW results in segfault at process start. For
now force BIND_NOW off until the root cause can be identified and fixed.
PR: 233333
Sponsored by: The FreeBSD Foundation
Some external tools like tcpdump(1) have upstream the changes with old limits
name. Because of that provide compatibility with the old names.
Reported by: emaste
If rootfs isn't ZFS, current version will emit an error claiming so and fail
to initialize libbe. As a consumer, bectl -r (undocumented) can be specified
to operate on a BE independently of whether on a UFS or ZFS root.
Unbreak this for the UFS case by only erroring out the init if we can't
determine a ZFS dataset for rootfs and no BE root was specified. Consumers
of libbe should take care to ensure that rootfs is non-empty if they're
trying to use it, because this could certainly be the case.
Some check is needed before zfs_path_to_zhandle because it will
unconditionally emit to stderr if the path isn't a ZFS filesystem, which is
unhelpful for our purposes.
This should also unbreak the bectl(8) tests on a UFS root, as is the case in
Jenkins' -test runs.
MFC after: 3 days
Previously we would blindly copy the 'mountpoint' property, which includes
the altroot. The altroot needs to be snipped off prior to setting it on the
new BE, though, or you'll end up with a new BE and a mountpoint of /mnt with
altroot=/mnt
MFC after: 3 days
Add an undocumented -r option preceding the bectl subcommand to specify a BE
root to operate out of. This will remain undocumented for now, as some
caveats apply:
- BEs cannot be activated in the pool that doesn't contain the rootfs
- bectl create cannot work out of the box without the -e option right now,
since it defaults to the rootfs and cross-pool cloning doesn't work like
that (IIRC)
Plumb the BE root through to libbe(3) so that some things -can- be done to
it, e.g.
bectl -r tank/ROOT create -e default upgrade
bectl -r tank/ROOT mount upgrade /mnt
this aides in some upgrade setups where rootfs is not necessarily ZFS, and
also makes it easier/possible to regression-test bectl when combined with a
file-backed zpool.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18029
Go through the ZFS layer instead; given a BE, we can derive the dataset,
zfs_open it, then zfs_unmount. ZFS takes care of the dirty details and
likely gets it more correct than we did for more interesting setups.
MFC after: 3 days
libbe(3) currently uses zfs_be_root and locates which of its children is
currently mounted at "/". This is reasonable, but not correct in the case of
a chroot, for two reasons:
- chroot root may be of a different zpool than zfs_be_root
- chroot root will not show up as mounted at "/"
Fix both of these by rewriting libbe_init to work from the rootfs down.
zfs_path_to_zhandle on / will resolve to the dataset mounted at the new
root, rather than the real root. From there, we can derive the BE root/pool
and grab the bootfs off of the new pool. This does no harm in the average
case, and opens up bectl to operating on different pools for scenarios where
one may be, for instance, updating a pool that generally gets re-rooted into
from a separate UFS root or zfs bootpool.
While here, I've also:
- Eliminated the check for /boot and / to be on the same partition. This
leaves one open to a setup where /boot (and consequently, kernel/modules)
are not included in the boot environment. This may very well be an
intentional setup done by someone that knows what they're doing, we should
not kill BE usage because of it.
- Eliminated the validation bits of BEs and snapshots that enforced
'mountpoint' to be "/" -- this broke when trying to operate on an imported
pool with an altroot, but we need not be this picky.
Reported by: philip
Reviewed by: philip, allanjude (previous version)
Tested by: philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18012
Instead of jumping to locations which store the exact number of bytes,
use displacement to move the destination.
In particular the following clears an area between 8-16 (inclusive)
branch-free:
movq %r10,(%rdi)
movq %r10,-8(%rdi,%rcx)
For instance for rcx of 10 the second line is rdi + 10 - 8 = rdi + 2.
Writing 8 bytes starting at that offset overlaps with 6 bytes written
previously and writes 2 new, giving 10 in total.
Provides a nice win for smaller stores. Other ones are erratic depending
on the microarchitecture.
General idea taken from NetBSD (restricted use of the trick) and bionic
string functions (use for various ranges like in this patch).
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17660
- tidy up memset to have rax set earlier for small sizes
- finish the tail in memset with an overlapping store
- align memset buffers to 16 bytes before using rep stos
Sponsored by: The FreeBSD Foundation
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
libnv used fcntl(fd, F_GETFL) to test whether fd is a valid file
descriptor. Aside from being racy, this check requires CAP_FCNTL
rights on fd. Instead, use fcntl(fd, F_GETFD), which does not require
any capability rights.
Also remove some redundant fd_is_valid() checks to avoid extra system
calls; in many cases we were performing this check immediately before
dup()ing the descriptor.
Reviewed by: cem, oshogbo (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17963
And build libdl unconditionally. All supported FreeBSD linkers accept
-F / --filter so there is no need to test for support.
Discussed with: kib
Sponsored by: The FreeBSD Foundation
cap_fileargs is a Casper service which helps to sandbox applications that need
access to the filesystem namespace. The main purpose of the service is to make
easy to capsicumize applications that works on multiple files passed in argv.
We have a couple example of using it but we still treat this service as an
experimental one.
Reviewed by: emsate (previous version), jonathan (partially)
Discussed with: many
Differential Revision: https://reviews.freebsd.org/D14407
paths.
It was decided that committing the code and drafting of the man page
update is better than allowing the code to rot until wordsmithing
happens.
Reviewed by: jilles (previous version)
Discussed with: brooks, jilles, emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17714
and dependent functions (eg getpwname(3)) get called. This can
improve performance of binaries that perform a lot of name
lookups, such as gssd(8). It also matches documented behaviour
of Linux and Solaris.
The old code is left in place, should anyone need it, guarded
by #ifdef NS_REREAD_CONF.
Reviewed by: imp, bcr
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17934
The previously activated BE should have canmount=noauto set on it upon
activation of the new BE, but we previously did not touch canmount on either
old or new BE.
PR: 233113
MFC after: 3 days
fusefs is inconsistently named. The kernel module is named "fuse", but the
mount helper is named "mount_fusefs" and the jail(8) parameter is named
"allow.mount.fusefs". Special case it in libjail.
Reviewed by: jamie
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17929
It is required by llvm-profdata, now built by default under the
LLVM_COV knob. The additional complexity that would come from avoiding
building it if CLANG_EXTRAS and LLVM_COV are both disabled is not worth
the small savings in build time.
Sponsored by: The FreeBSD Foundation
