chains and copying in mbufs from the body of the send logic, creating
a new function sosend_copyin(). This changes makes sosend() almost
readable, and will allow the same logic to be used by tailored socket
send routines.
MFC after: 1 month
Reviewed by: andre, glebius
appeared to rely on all kinds of non-guaranteed behaviours: the
transfer abort code assumed that TDs with no interrupt timeout
configured would end up on the done queue within 20ms, the done
queue processing assumed that all TDs from a transfer would appear
at the same time, and there were access-after-free bugs triggered
on failed transfers.
Attempt to fix these problems by the following changes:
- Use a maximum (6-frame) interrupt delay instead of no interrupt
delay to ensure that the 20ms wait in ohci_abort_xfer() is enough
for the TDs to have been taken off the hardware done queue.
- Defer cancellation of timeouts and freeing of TDs until we either
hit an error or reach the final TD.
- Remove TDs from the done queue before freeing them so that it
is safe to continue traversing the done queue.
This appears to fix a hang that was reproducable with revision 1.67
or 1.68 of ulpt.c (earlier revisions had a different transfer
pattern). With certain HP printers, the command "true > /dev/ulpt0"
would cause ohci_add_done() to spin because the done queue had a
loop. The list corruption was caused by a 3-TD transfer where the
first TD completed but remained on the internal host controller
done queue because it had no interrupt timeout. When the transfer
timed out, the TD got freed and reused, so it caused a loop in the
done queue when it was inserted a second time from a different
transfer.
Reported by: Alex Pivovarov
MFC after: 1 week
application wishes to request high precision time stamps be returned:
Alias Existing
CLOCK_REALTIME_PRECISE CLOCK_REALTIME
CLOCK_MONOTONIC_PRECISE CLOCK_MONOTONIC
CLOCK_UPTIME_PRECISE CLOCK_UPTIME
Add experimental low-precision clockid_t names corresponding to these
clocks, but implemented using cached timestamps in kernel rather than
a full time counter query. This offers a minimum update rate of 1/HZ,
but in practice will often be more frequent due to the frequency of
time stamping in the kernel:
New clockid_t name Approximates existing clockid_t
CLOCK_REALTIME_FAST CLOCK_REALTIME
CLOCK_MONOTONIC_FAST CLOCK_MONOTONIC
CLOCK_UPTIME_FAST CLOCK_UPTIME
Add one additional new clockid_t, CLOCK_SECOND, which returns the
current second without performing a full time counter query or cache
lookup overhead to make sure the cached timestamp is stable. This is
intended to support very low granularity consumers, such as time(3).
The names, visibility, and implementation of the above are subject
to change, and will not be MFC'd any time soon. The goal is to
expose lower quality time measurement to applications willing to
sacrifice accuracy in performance critical paths, such as when taking
time stamps for the purpose of rescheduling select() and poll()
timeouts. Future changes might include retrofitting the time counter
infrastructure to allow the "fast" time query mechanisms to use a
different time counter, rather than a cached time counter (i.e.,
TSC).
NOTE: With different underlying time mechanisms exposed, using
different time query mechanisms in the same application may result in
relative non-monoticity or the appearance of clock stalling for a
single clockid_t, as a cached time stamp queried after a precision
time stamp lookup may be "before" the time returned by the earlier
live time counter query.
This shouldn't happen as far as the self-id buffer is vaild but
some people have this problem.
PR: kern/83999
Submitted by: Markus Wild <fbsd-lists@dudes.ch>
MFC after: 3 days
- In ifc_name2unit(), disallow leading zeroes in a unit.
Exploit: ifconfig lo01 create
- In ifc_name2unit(), properly handle overflows. Otherwise,
either of two local panic()'s can occur, either because
no interface with such a name could be found after it was
successfully created, or because the code will bogusly
assume that it's a wildcard (unit < 0 due to overflow).
Exploit: ifconfig lo<overflowed_integer> create
- Previous revision made the following sequence trigger
a KASSERT() failure in queue(3):
Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy
This is because IFC_IFLIST_REMOVE() is always called
before ifc->ifc_destroy() has been run, not accounting
for the fact that the latter can fail and leave the
interface operating (like is the case for "lo0").
So we ended up calling LIST_REMOVE() twice. We cannot
defer IFC_IFLIST_REMOVE() until after a call to
ifc->ifc_destroy() because the ifnet may have been
removed and its memory has been freed, so recover from
this by re-inserting the ifnet in the cloned interfaces
list if ifc->ifc_destroy() indicates a failure.
the geom creation to a seperate init function and ignore the tasting.
The config is now parsed only in the vinumdrive geom, which hopefully
fixes the problem, that the drive class tasted before the vinum class
had a chance, for good.
Also restore the behaviour that the module can be loaded at boot time
and on a running system.
directly. We need to copyin() the strings in the iovec before
we can strcmp() them. Also, when we want to send the errmsg back
to userspace, we need to copyout()/copystr() the string.
Add a small helper function vfs_getopt_pos() which takes in the
name of an option, and returns the array index of the name in the iovec,
or -1 if not found. This allows us to locate an option in
the iovec without actually manipulating the iovec members. directly via
strcmp().
Noticed by: kris on sparc64
- Add locked variants of start, init, and ifmedia_upd.
- Add a mutex to the softc and remove spl calls.
- Use callout(9) rather than timeout(9).
- Setup interrupt handler last in attach.
- Use M_ZERO rather than bzero.
MFC after: 1 week
Tested by: wpaul
- Improve panic message if we fail to read the PCI bus number from a bridge
device.
- Don't try to lookup a BIOS IRQ for a link unless the link is routed via
an ISA IRQ since BIOSen currently only route PCI link devices via ISA
IRQs.
Tested by: Mathieu Prevot bsdhack at club-internet dot fr
MFC after: 1 week
but not provide a panic(9) implementation. Thus, enable the sanity
checks under INVARIANTS only if _KERNEL is also defined.
Submitted by: jmallett
Approved by: rwatson (mentor)
Instead, re-evaluate _BIF only when we get a notify and use the cached
results. We also still evaluate _BIF once on boot. Also, optimize the
init loop a little by only querying for a particular info if it's not valid.
MFC after: 2 days
during SMP startup. We haven't had any issues with starting up the APs
on i386 in quite a while now which is all this code is really useful for.
If someone ever does really need it they can always dig it up out of the
attic.
INO) for incorrect interrupt map entries on E250 machines. These
incorrect entries caused the INO of the on-board HME to be also
assigned to the second on-board NS16550 and to the on-board printer
port controller. Further down the road caused hme(4) to fail to attach
to the on-board HME in FreeBSD 5 and 6 as INTR_FAST and non-INTR_FAST
handlers can't share the same IRQ there (it's unknown what whould
happen in -CURRENT now that INTR_FAST and non-INTR_FAST handlers can
share an IRQ but I'd expect funny problems with uart(4)).
- Make sure there are exactly 4 PCI ranges instead of just checking
that the bridge has a 'ranges' property in the OFW device tree at all.
Besides the fact that currently the 64bit memory range isn't used by
this driver it we can't really work with less than 4 ranges and don't
have memory for more than 4 bus handles for the ranges in the softc.
- Remove sc_range and sc_nrange from softc; for the bridges supported
by this driver we no longer need to know the ranges besides the bus
handles obtained from them once this driver is attached. That way we
also can free the memory allocated for sc_range during attach again.
- Remove sc_dvmabase from the softc and pass it to psycho_iommu_init()
via an additional argument as we no longer need to know the DVMA base
in this driver once the IOMMU is initialized.
- Remove sc_dmatag from the softc, there isn't much sense in keeping
the nexus dma tag around locally.
PR: 88279 [1]
Info from: OpenSolaris [1]
Tested by: kensmith [1]
MFC after: 1 month
between this driver and other Host-PCI bridge drivers based on this one:
- Make the code fit into 80 columns.
- Make the code adhere style(9) (don't use function calls in initializers,
use uintXX_t instead of u_intXX_t, add missing prototypes, ...).
- Remove unused and superfluous struct declaration, softc member, casts,
includes, etc.
- Use FBSDID.
- Sprinkle const.
- Try to make comments and messages consistent in style throughout the
driver.
- Use convenience macros for the number of interrupts and ranges of the
bridge.
- Use __func__ instead of hardcoded function names in panic strings and
error messages. Some of the hardcoded function names actually were
outdated through moving code around. [1]
- Rename softc members related to the PCI side of the bridge to sc_pci_*
in order to make it clear which side of the bridge they refer to (so
stuff like sc_bushandle vs. sc_bh is less confusing while reading the
code).
PR: 76052 [1]
additionally on ebus(4) as the 'SUNW,envctrl' devices (as well as
'SUNW,envctrltwo' and 'SUNW,rasctrl', which we might want to also
support in envctrl.c in the future) are only found on EBus.
on powerpc (more or less...). That way people updating from FreeBSD 5 to
FreeBSD 6 and beyond on sparc64 will get an error from config(8) rather
than a mysterious compile error when they have a stale 'device zs' in
their kernel config file.
MFC after: 2 weeks
ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
to attach a child gracefully instead of panicing, move the printing
of child resources common to bus_print_child() and bus_probe_nomatch()
implementations of a bus into a <bus>_print_res() function, ...) and
fix some minor bugs and nits (plug memory leaks present when attaching
a bus or child device fails, remove unused struct members, ...).
Additional testing by: kris (central(4) and fhc(4))
a newly introduced struct ofw_bus_devinfo which can hold the OFW info
of a device recallable via the ofw_bus KOBJ interface. Introduce a set
of functions ofw_bus_gen_get_*() which use ofw_bus_default_get_devinfo()
to provide generic subroutines for implementing the rest of the ofw_bus
KOBJ interface in a bus driver.
This is inspired by bus_get_resource_list() and bus_generic_rl_*_resource()
and allows to reduce code duplication in bus drivers as they only have
to provide an ofw_bus_default_get_devinfo() implementation in order to
provide the ofw_bus KOBJ interface via ofw_bus_gen_get_*().
- While here add a comment to ofw_bus_if.m describing the intention of
the ofw_bus KOBJ interface.
Reviewed by: marcel
If the complete reply on the TRANS2_FIND_FIRST2 request fits exactly
into one responce packet, then next call to TRANS2_FIND_NEXT2 will return
zero entries and server will close current transaction. To avoid
subsequent errors we should not perform FIND_CLOSE2 request.
PR: kern/78953
Submitted by: Jim Carroll
connection queue for a new connection. It was removing connections
from the wrong list.
Submitted by: Paul Mikesell
Sponsored by: Isilon Systems
MFC after: 1 week
the tree.
- Add locked variants of nve_start(), nve_init(), and nve_ifmedia_upd().
- Use callout_* to manage callouts rather than timeout(9).
- Mark interrupt handler MPSAFE (IFF_NEEDGIANT was already clear).
- Lock the driver lock in driver entry points such as the interrupt
handler, if_start, and if_init rather than locking the driver mutex
in the various work functions called by the binary blob. The spin lock
used by the binary block can probably be stubbed out now.
- Use IFQ_DRV_IS_EMPTY() macro rather than doing it by hand.
- Fix locking in detach.
- Remove some unused fields from the softc.
Tested by: cognet
MFC after: 2 weeks
the IRQ set by the BIOS in existing devices to actually get the correct
bus number of the child PCI bus. I was not reading the bus number from
the bridge device correctly. The __BUS_ACCESSOR() macros (from which
pcib_get_bus() is built) assume that the passed in argument is a child
device. However, at the time I'm reading the bus there is no child
device yet, so I was passing in the pcib device as the child device.
The parent of the pcib device probably returned an error in the case of
a host bridge, thus resulting in random stack garbage for the bus number.
For PCI-PCI bridges, the bus number being used was actually the subvendor
of the PCI-PCI bridge device itself.
MFC after: 1 week
- Don't call tulip_addr_filter() to reset the RX address filter in
tulip_reset() since that gets called before ether_ifattach(). Just
call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
thing with the added bonus that we leaked the driver lock if the MTU
was > ETHERMTU in the homerolled version. This part will be MFC'd.
Clue from: wpaul (1)
Stolen from: marcel (2 via patch for dc(4))
MFC after: 1 week
via the DEFAULTS kernel configs. This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.
I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
'device mem' over from GENERIC to DEFAULTS to be consistent with i386 and
amd64. Additionally, on ia64 enable ACPI by default since ia64 requires
acpi.
event of an error, does the right thing, in terms of setting
the error flags in the buf header. That fixes a crash from
bstrategy().
- Treat ETIMEDOUT as a "recoverable" error, causing the buffer
to be re-dirtied. ETIMEDOUT can occur on soft mounts, when
the number of retries are exceeded, and we don't want data loss
in that case.
Submitted by: Mohan Srinivasan
during boot up. Now we do a full reset of the 8259As and setup a simple
interrupt handler (we actually borrow the apic one that just does an
immediate iret) to handle any spurious interrupts triggered by either chip.
This should fix some folks that were getting a Trap 30 during bootup of
certain SMP AMD systems. This might get pushed into the 6.0 branch as an
errata. For now a suitable workaround is to add 'device atpic' to your
kernel config.
Tested by: scottl
Helpful info from: dillon
MFC after: 1 week
buildkernel: provide a real but dummy name to ${DEPENDFILE}
so that the relevant exists() check in bsd.prog.mk fails and
ensures that ${GENHDRS} are built before any other objects.
MFC after: 3 days
- don't force busdma to pre-allocate bounce pages for parent tag.
- use system supplied roundup2 macro instead of rolling its own version.
- TX/RX decriptor length should be multiple of 128. There is no
no need to expand the size with the multiple of 4096.
- don't create/destroy DMA maps in TX/RX handlers. Use pre-allocated
DMA maps. Since creating DMA maps on sparc64 is time consuming
operations(resource mananger overhead), this change should boost
performance on sparc64. I could get > 2x speedup on Ultra60.
- TX/RX descriptors could be aligned on 128 boundary. Aligning them
on PAGE_SIZE is waste of resource.
- don't blindly create TX DMA tag with size of MCLBYTES * 8. The size
is only valid under jumbo frame environments. Instead of using the
hardcoded value, re-compute necessary size on the fly.
- RX side bus_dmamap_load_mbuf_sg(9) support.
- remove unused macro EM_ROUNDUP and constant EM_MMBA.
Reviewed by: scottl
Tested by: glebius
that enabling busmastering would result in PCR bit ON after codec
reset.
While I'm here add DELAY(1) to codec access routine to give reasonable
time to codec operation. Without the delay, it would cause problems on
super-fast machines(> 2GHz). Also enable legacy audio for all 6300ESB,
82801[D-G]B chips. Previously, it enabled legacy audio for 82801DB(ICH4)
chip only.
Reported by: Maxim Maximov mcsi AT mcsi DOT pp DOT ru
Andrew Bliznak andriko.b AT gmail DOT com
Tested by: brueffer, Maxim Maximov, Andrew Bliznak
for export structure and pass that to vfs_export().
Currently in userland mount(8), an export structure is unconditionally
passed in, only for UFS. This is an attempt to move that UFS-specific
behavior out of mount(8) and into the UFS filesystem code.
Don't allocate potentially large variables on the stack.
Check strsep() return values when the string comes from userland.
Shorten variable names for lucidity's sake.
most of the stuff:
Pointed out by: njl@
use the base time in case the real-time clock is bogus or behind the
base time. Most importantly, don't sanity-check the base time up front
because it may be zero. This is not a preposterous condition. It just
means that none of the file systems have their mount time updated.
MFC after: 1 week
for a Windows ISR is 'BOOLEAN isrfunc(KINTERRUPT *, void *)' meaning
the ISR get a pointer to the interrupt object and a context pointer,
and returns TRUE if the ISR determines the interrupt was really generated
by the associated device, or FALSE if not.
I had mistakenly used 'void isrfunc(void *)' instead. It happens the
only thing this affects is the internal ndis_intr() ISR in subr_ndis.c,
but it should be fixed just in case we ever need to register a real
Windows ISR vi IoConnectInterrupt().
For NDIS miniports that provide a MiniportISR() method, the 'is_our_intr'
value returned by the method serves as the return value from ndis_isr(),
and 'call_isr' is used to decide whether or not to schedule the interrupt
handler via DPC. For drivers that only supply MiniportEnableInterrupt()
and MiniportDisableInterrupt() methods, call_isr is always TRUE and
is_our_intr is always FALSE.
In the end, there should be no functional changes, except that now
ntoskrnl_intr() can terminate early once it finds the ISR that wants
to service the interrupt.
When all file systems have a time stamp of zero, which is the case
for example when the root file system is on a read-only medium, we
ended up not calling inittodr() at all. A potential uncleanliness
existed as well. If multiple file systems had a non-zero time stamp,
we would call inittodr() multiple times. While this should not be
harmful, it's definitely not ideal.
Fix both issues by iterating over the mounted file systems to find
the largest time stamp and call inittodr() exactly once with that
time stamp. This could of course be a zero time stamp if none of the
mounted file systems have a non-zero time stamp. In that case the
annoying errors mentioned in the commit log for revision 1.186 still
haven't been avoided. The bottom line is that inittodr() should not
complain when it gets a time base of zero. At the time of this
commit only alpha seems to have that problem.
Reported by: Dario Freni (saturnero at freesbie dot org)
MFC after: 1 week
is called. It looks like there are lots of different mount flags checked
in vfs_domount(), so we need to do the parsing for these particular
mount flags earlier on. The new flags parsed are:
async, force, multilabel, noasync, noatime, noclusterr, noclusterw,
noexec, nosuid, nosymfollow, snapshot, suiddir, sync, union.
Existing code which uses mount() to mount UFS filesystems is not
affected, but new code which uses nmount() to mount UFS filesystems
should behave better.
Add functions to rename objects and to move a subdisk from one drive
to another.
Obtained from: Chris Jones <chris.jones@ualberta.ca>
Sponsored by: Google Summer of Code 2005
MFC in: 1 week
have any know to enable it from userland and could only be enabled by
either setting it to 1 at compile time or through the kernel debugger.
In the future it may be brought back as KTR tracing points.
Discussed with: rwatson
Sponsored by: TCP/IP Optimization Fundraise 2005
directory by default) without requiring the user to load them by hand using
e.g iwicontrol. Get rid of the old ioctl crud.
Updated iwi-firmware port coming soon.
Obtained from: OpenBSD
synonyms for "shortname" and "longname" mount options. The old
(before nmount()) mount_msdosfs program accepted "shortnames" and "longnames",
but the kernel nmount() checked for "shortname" and "longname".
So, make the kernel accept "shortnames", "longnames", "shortname", "longname"
for forwards and backwarsd compatibility.
Discovered by: Rainer Hurling <rhurlin at gwdg dot de>
include ip_options.h into all files making use of IP Options functions.
From ip_input.c rev 1.306:
ip_dooptions(struct mbuf *m, int pass)
save_rte(m, option, dst)
ip_srcroute(m0)
ip_stripoptions(m, mopt)
From ip_output.c rev 1.249:
ip_insertoptions(m, opt, phlen)
ip_optcopy(ip, jp)
ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m)
No functional changes in this commit.
Discussed with: rwatson
Sponsored by: TCP/IP Optimization Fundraise 2005
to list corruption, which can be difficult to unravel in a post-mortem
analysis. These checks verify that prev and next pointers are consistent
when inserting or removing elements, thus catching any corruption earlier.
Also use TRASHIT to break LIST and SLIST link pointers on element removal,
from mlaier via -hackers.
Reviewed by: mlaier
Approved by: rwatson (mentor)
mystery traps. If we don't have a message for a given trap, just use
UNKNOWN for the message.
- Add trap messages for T_XMMFLT and T_RESERVED.
MFC after: 1 week
have free space in it. Allocate correct mbuf from the beginning.
This allows icmp_error() to quote the entire TCP header in error
messages.
Sponsored by: TCP/IP Optimization Fundraise 2005
callpath via vfs_getopt(), and set the appropriate MNT_* flag:
-> acls, async, force, multilabel, noasync, noatime,
-> noclusterr, noclusterw, snapshot, update
- Allow errmsg as a valid mount option via vfs_getopt(),
so we can later add a hook to propagate mount errors back
to userspace via vfs_mount_error().
the underlying drive had been hot-unplugged from the system. Here
is a specific example. Filesystem code had opened /dev/da1s1e.
Subsequently, the drive was hot-unplugged. This (correctly) caused
all of the associated /dev/da1* entries to be deleted. When the
filesystem later realized that the drive was gone it closed the
device, reducing the write-access counts to 0 on the geom providers
for da1s1e, da1s1, and da1. This caused geom to re-taste the
providers, resulting in the devices being created again. When the
drive was hot-plugged back in, it resulted in duplicate /dev entries
for da1s1e, da1s1, and da1.
This fix adds a new disk_gone() function which is called by CAM when a
drive goes away. It orphans all of the providers associated with the
drive, setting an error condition of ENXIO in each one. In addition,
we prevent a re-taste on last close for writing if an error condition
has been set in the provider.
Sponsored by: Isilon Systems
Reviewed by: phk
MFC after: 1 week
in, and if so, set MNT_UPDATE filesystem flag.
vfs_nmount() calls vfs_domount(), and there is special logic
inside vfs_domount() if MNT_UPDATE is set. This is very important
when we want to do an update mount of the root filesystem, using nmount().
Prevent backup CARP hosts from replying to arp requests, fixes strangeness
with some layer-3 switches. From Bill Marquette.
Tested by: Kazuaki Oda <kaakun highway.ne.jp>
for a notebook with em(4) adapter.
- Introduce tunables em.hw.txd and em.hw.rxd, which allow administrator
to configure number of transmit and receive descriptors.
- Check em.hw.txd and em.hw.rxd against hardware limits [*] and require
them to be multiple of 128.
[*] According to comments in if_em.h the 82540EM/82541ER chips can handle
more than 256 descriptors. Since we don't have this hardware to test,
we decided to mimic NetBSD wm(4) driver, that limits these chips to
256 descriptors.
In collaboration with: yongari
IPI_STOP handling code use atomic_readandclear() to execute the restart
function on the first CPU to resume and restore the behavior of always
executing the restart function on the BSP since this is in fact what the
non-NMI IPI_STOP handler does. I did add back in a statement to clear
the restart function pointer after it is executed to match the behavior
of the non-NMI IPI_STOP handler.
I/O APIC that doesn't exist, then a read of the version register is going
to return -1 which is 0xffffffff not 0xffffff.
Tested on: i386
Tested by: Nikos Ntarmos ntarmos at ceid dot upatras dot gr
MFC after: 1 week
that can potentially be mapped to negative ieee #'s.
NB: before operation on the latter can be supported we need to cleanup
various code that assumes ieee channel #'s are >= 0
stale when called to reset rate control state causing us to
pickup an invalid index, check for this and skip 'em (things
will eventually get fixed up so this is not harmful)
of volumes that might need administrator attention through device
specific sysctl to simplify device monitoring.
Submitted by: Deomid Ryabkov <myself at rojer dot pp dot ru>
execute a ET_DYN binary (shared object).
This does not make much sense, but some linux scripts expect to be able to
execute /lib/ld-linux.so.2 (ldd comes to mind).
The sysctl defaults to 0.
MFC after: 3 days
currently present is minor and offers no real semantic issues, it also
doesn't make sense since an earlier lockless check has already
occurred. Also hold the mutex longer, over a manipulation of
per-process ktrace state, which requires synchronization.
MFC after: 1 month
Pointed out by: jhb
This one simply tries to simplify the logic to select the
buffer sizes. I am not sure it is necessary but the code
seems a bit more readable to me. And at least i have tried
to document how the buffer sizes are computed.
Thanks to luigi for deciphering one of the most cryptic part of
sound driver.
Submitted by: luigi
Approved by: netchild (mentor)
In SNDCTL_DSP_SETFRAGMENT, if you specify both read and
write channels, the existing code first acts on the
read channel, but as a side effect it updates the
arguments (maxfrags, fragsz) passed by the caller according
to acceptable values for the read channel, and then uses the
modified values to act on the write channel.
The problem with this approach is that, given a
(maxfrags, fragsz) user-specified value, the actual
values computed by the read and write channels may differ:
e.g. the read channel might want to allocate more fragments
than what the user specified because it has no side-effects
on the delay and it helps in case of slow readers,
whereas the write channel needs to use as few fragments
as possible to keep the audio latency low (very important
with telephony apps).
This patch stores the values computed by the read channel
into temproary variables so the write channel will use
the actual arguments of the ioctl.
This patch is very helpful with telephony apps such as asterisk.
Submitted by: luigi
Approved by: netchild (mentor)
- Added new codec id for CX20468-21 and VIA1617A.
Submitted by: Chen Lihong <lihong.chen@gmail.com>
- Re-enable SOUND_MIXER_IGAIN, but set the default level as 0 (mute)
Suggested by: luigi
mixer.c:
- Set default value for SOUND_MIXER_IGAIN as 0 (mute) to avoid
feedback problems on some laptops (was disabled by jhb during
ac97.c revision 1.42).
Approved by: netchild (mentor)
erratic system slowdown (beaten to a pulp) and possible panic. This
issue has bugged me for as long as I could remember, until I
realized that it is possible for register base offset to hold zero
value which is definitely a "FALSE".
Approved by: netchild (mentor)
compatible AC97 codec.
- As the driver supports so many variants, create a table ids for
ease of probing and maintenance.
Submitted by: yongari
Reviewed/Tested by: multimedia@
- From luigi:
The code to compute fragment sizes in the ich driver almost
invariably ends up using the full buffer available, no matter
how the user specifies fragment size and number.
With audio telephony (8khz, 16bit-stereo) and the 16k buffer
size this results in an unbearable 500ms delay.
This patch makes sure that we never use more than 4 fragments,
(i don't think we need more unless there are huge interrupt
servicing latencies), and obey to the requested fragment size,
so that latency is acceptable.
Based on this (and after much regression tests), I can conclude
that this driver works best with 2 fragments, thus solving various
long standing issues of ICH driver not capable to flush or play
short files perfectly.
Suggested by: luigi (the idea of smaller fragments)
- MPSAFE conversion.
Approved by: netchild (mentor)
distinct hardware playback channels. DAC configuration can be
accessed through kernel hint - hint.pcm.<unit>.dac="val" with
following possible values:
0 = Enable both DACs (default)
1 = Enable single DAC (DAC1)
2 = Enable single DAC (DAC2)
3 = Enable both DACs, swap position (DAC2 comes first instead
of DAC1)
Special case for ES1370:
Unlike ES1371,2,3/CT5880, volume for each DAC 1 and 2 can be
controlled indepedently (synth for DAC1, pcm for DAC2). It is
possible that user will confuse by this behaviour, since both
DACs are enabled by default. Thus, provide a knob through sysctl
hw.snd.pcm<unit>.single_pcm_mixer:
0 = each DACs will be controlled separately (synth/pcm).
1 = combine both DACs volume mixer controller into a single
"pcm" (default)
As a side note, fixed rate operation (provided by previous
commit) is not a mandatory if the configuration space does not
involve DAC2 (perhaps disabled by user through the above kernel
hint). Unlike DAC2, DAC1 has its own register / control space,
not affected by the speed settings of ADC.
Tested by: multimedia@
Approved by: netchild (mentor)
mask to recdev_l and recdev_r, since each have its own unique mask.
Submitted by: Watanabe Kazuhiro <CQG00620@nifty.ne.jp>
Approved by: netchild (mentor)
verbs. Only the create verb operates on a provider. All other verbs
operate on a GPT geom. Also, the GPT entry oriented verbs require
a non-downgraded GPT.
o Have all verbs take an optional flags parameter. The flags parameter
is a string of single-letter flags. The typical use of these flags
is to enable certain behaviour in support fo the gpt(8) tool.
o Add dummy implementations for the destroy and recover verbs.
This change causes test 2 of the GPT regression test suite to fail.
The presence of a geom parameter is now required even for unknown
verbs.
If the packet is rejected from pfil(9) then continue the loop rather than
returning, this means that we can still try to send it out the remaining
interfaces but more importantly the mbuf is freed and refcount decremented on
exit.
just discard the received frame and reuse the old mbuf.
This should prevent the connection from stalling after high network traffic.
MFC after: 2 weeks
a new mbuf, just discard the received frame and reuse the old mbuf.
This should fix kernel panics on high network traffic.
Obtained from: NetBSD (joerg@)
MFC after: 2 weeks
It may be the case that you may hear some unwanted noise while
playing back with 24/32 bit. This is a problem in the USB system.
Explanation from Hans Petter Selasky:
---snip---
The current USB sound driver only uses one isochronous
buffer, that is restarted when it is completed. This will lead to a short
period of time, +1ms, where no sound data is sent to the external USB device.
Depending on the load of your computer, this can be as much as 50ms. So the
USB sound driver must use 2 isochronous transfers. At the beginning one will
queue both. Then these are restarted on completion. This will result in a
constant-rate data stream to the external sound device, a minimum sound
buffer equal to the size of the isochronous buffer, and possibly the sound
will reach your ears with less delay. Little delay is a result of constant
data rate. Currently only my USB driver will support that. If one tries that
with the USB driver in *BSD, then it will crash at the first moment one gets
a buffer underrun.
---snip---
Submitted by: Kazuhito HONDA <kazuhito@ph.noda.tus.ac.jp>
Mono-recording still not tested by: julian
reliability when tracing fast-moving processes or writing traces to
slow file systems by avoiding unbounded queueuing and dropped records.
Record loss was previously possible when the global pool of records
become depleted as a result of record generation outstripping record
commit, which occurred quickly in many common situations.
These changes partially restore the 4.x model of committing ktrace
records at the point of trace generation (synchronous), but maintain
the 5.x deferred record commit behavior (asynchronous) for situations
where entering VFS and sleeping is not possible (i.e., in the
scheduler). Records are now queued per-process as opposed to
globally, with processes responsible for committing records from their
own context as required.
- Eliminate the ktrace worker thread and global record queue, as they
are no longer used. Keep the global free record list, as records
are still used.
- Add a per-process record queue, which will hold any asynchronously
generated records, such as from context switches. This replaces the
global queue as the place to submit asynchronous records to.
- When a record is committed asynchronously, simply queue it to the
process.
- When a record is committed synchronously, first drain any pending
per-process records in order to maintain ordering as best we can.
Currently ordering between competing threads is provided via a global
ktrace_sx, but a per-process flag or lock may be desirable in the
future.
- When a process returns to user space following a system call, trap,
signal delivery, etc, flush any pending records.
- When a process exits, flush any pending records.
- Assert on process tear-down that there are no pending records.
- Slightly abstract the notion of being "in ktrace", which is used to
prevent the recursive generation of records, as well as generating
traces for ktrace events.
Future work here might look at changing the set of events marked for
synchronous and asynchronous record generation, re-balancing queue
depth, timeliness of commit to disk, and so on. I.e., performing a
drain every (n) records.
MFC after: 1 month
Discussed with: jhb
Requested by: Marc Olzheim <marcolz at stack dot nl>
- several TerraTec TValue [1]
- PixelView PlayTV Pro REV-4C [2]
In case you have the PixelView card, please tell us the "pciconf -v -l"
output on multimedia@FreeBSD.org if it works. There are revisions out there
which may not work and we need to know which ones work.
PR: 53383 [1], 76002 [2]
Submitted by: Tanja Wittke <tawi@gruft.de> [1], barner [1],
Dan Angelescu <mrhsaacdoh@yahoo.com> [2]
MFC after: 2 months
This is the only file of > 1700 files in a buildkernel here doing that.
It makes reproducible builds (same source => same binary) impossible.
Spotted by: devel/ccache
is that gdb knows SIGLWP and will pass it to program, otherwise gdb
will print out "unknown signal" and discard it, and then thread
cancellation won't work for libthr under gdb.
MFC: 3 days
MD class. Previously only the DISK class was dumped. The only
consumer of this sysctl is libdisk (i.e. sysinstall) and it tests
explicitly for instances of the DISK class. Dumping other classes
is therefore harmless.
By also dumping the MD class regression tests can be written that
use the MD class for operations that would normally be done on the
DISK class. The sysctl can now be used to test if those operations
took an effect. An example is partitioning.
from the printer and discarding the data even if the ulpt device
was opened for reading. This resulted in crashes because two
conconcurrent read transfers were using the same transfer structure.
PR: usb/88886
Reported By: Alex Pivovarov
MFC after: 1 week
happiness, as well as correct other bugs:
- Replace notion of current and saved accounting credential/vnode with a
single credential/vnode and an acct_suspended flag. This simplifies the
accounting logic substantially.
- Replace acct_mtx with acct_sx, a sleepable lock held exclusively during
reconfiguration and space polling, but shared during log entry
generation. This avoids holding a mutex over sleepable VFS operations.
- Hold the sx lock over the duration of the I/O so that the vnode I/O
cannot occur after vnode close, which could occur previously if
accounting was disabled as a process exited.
- Write the accounting log entry with Giant conditionally acquired based
on the file system where the log is stored. Previously, the accounting
code relied on the caller acquiring Giant.
- Acquire Giant conditionally in the accounting callout based on the file
system where the accounting log is stored. Run the callout MPSAFE.
- Expose acct_suspended via a read-only sysctl so it is possibly to
programmatically determine whether accounting is suspended or not without
attempting to parse logs.
- Check both acct_vp and acct_suspended lock-free before entering the
accounting sx lock in acct().
- When accounting is disabled due to a VBAD vnode (i.e., forceable unmount),
generate a log message indicating accounting has been disabled.
- Correct a long-standing bug in how free space is calculated and compared
to the required space: generate and compare signed results, not unsigned
results, or negative free space will cause accounting to not be suspended
when required, or worse, incorrectly resumed once negative free space is
reached.
MFC after: 2 weeks
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
The following repo-copies were made (by Mark Murray):
sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c
sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h
share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
copy of Ethernet address.
- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.
socket file descriptor garbage collection code, which is intended to
detect and clear cycles of orphaned file descriptors that are "in-flight"
in a socket when that socket is closed before they are received. The
algorithm present was both run at poor times (resulting in recursion and
reentrance), and also buggy in the presence of parallelism. In order to
fix these problems, make the following changes:
- When there are in-flight sockets and a UNIX domain socket is destroyed,
asynchronously schedule the garbage collector, rather than running it
synchronously in the current context. This avoids lock order issues
when the garbage collection code reenters the UNIX domain socket code,
avoiding lock order reversals, deadlocks, etc. Run the code
asynchronously in a task queue.
- In the garbage collector, when skipping file descriptors that have
entered a closing state (i.e., have f_count == 0), re-test the FDEFER
flag, and decrement unp_defer. As file descriptors can now transition
to a closed state, while the garbage collector is running, it is no
longer the case that unp_defer will remain an accurate count of
deferred sockets in the mark portion of the GC algorithm. Otherwise,
the garbage collector will loop waiting waiting for unp_defer to reach
zero, which it will never do as it is skipping file descriptors that
were marked in an earlier pass, but now closed.
- Acquire the UNIX domain socket subsystem lock in unp_discard() when
modifying the unp_rights counter, or a read/write race is risked with
other threads also manipulating the counter.
While here:
- Remove #if 0'd code regarding acquiring the socket buffer sleep lock in
the garbage collector, this is not required as we are able to use the
socket buffer receive lock to protect scanning the receive buffer for
in-flight file descriptors on the socket buffer.
- Annotate that the description of the garbage collector implementation
is increasingly inaccurate and needs to be updated.
- Add counters of the number of deferred garbage collections and recycled
file descriptors. This will be removed and is here temporarily for
debugging purposes.
With these changes in place, the unp_passfd regression test now appears
to be passed consistently on UP and SMP systems for extended runs,
whereas before it hung quickly or panicked, depending on which bug was
triggered.
Reported by: Philip Kizer <pckizer at nostrum dot com>
MFC after: 2 weeks
state about each open file, and identify the first process in the process
table that references the file. This is helpful in debugging leaks of
file descriptors.
MFC after: 1 week
The PR and patch have the details. The ultimate fix requires architectural
changes and clarifications to the VFS API, but this will prevent the system
from panicking when someone does "ls /dev" while running in a shell under the
linuxulator.
This issue affects HEAD and RELENG_6 only.
PR: 88249
Submitted by: "Devon H. O'Dell" <dodell@ixsystems.com>
MFC after: 3 days
with the file descriptor. When a file descriptor is closed as a result
of garbage collecting a UNIX domain socket, the file descriptor will
not have any associated thread, so the logic to identify advisory locks
held by that thread is not appropriate. Check the thread for NULL to
avoid this scenario. Expand an existing comment to say a bit more about
this.
MFC after: 1 week
thread context. While it doesn't matter too much at the moment, in
the future we could be back in the same boat if/when more restrictions
are placed (or enforced) in a SWI.
Suggested by: njl, bde, jhb, scottl
overruns and number of watchdog timeouts.
- Do not log(9) RX overrun events, since this pessimizes
things under load [1].
- Do not increase if->if_oerrors in em_watchdog(), since
this leads to counter slipping back, when if->if_oerrors
is recalculated in em_update_stats_counters(). Instead
increase watchdog counter in em_watchdog() and take it
into account in em_update_stats_counters().
Submitted by: ade [1]
- disable jumbo frame support on strict alignment architectures due
to the limitation of hardware. The driver needs a fix-up code for
RX side. The fix will show up in near future.
- fix endian issue for 82544 on PCI-X bus. I couldn't test this as
I don't have the NIC/hardware.
- prefer PCIR_BAR to hardcoded EM_MMBA.
- Properly checks for for 64bit BAR [1]
- replace inl/outl with bus_space(9) [1]
- fix endian issue on VLAN handling.
- reorder header files and remove unnecessary one.
Reviewed by: cognet
No response from: pdeuskar, tackerman
Obtained from: OpenBSD [1]
reclamation synchronously from get_pv_entry() instead of
asynchronously as part of the page daemon. Additionally, limit the
reclamation to inactive pages unless allocation from the PV entry zone
or reclamation from the inactive queue fails. Previously, reclamation
destroyed mappings to both inactive and active pages. get_pv_entry()
still, however, wakes up the page daemon when reclamation occurs. The
reason being that the page daemon may move some pages from the active
queue to the inactive queue, making some new pages available to future
reclamations.
Print the "reclaiming PV entries" message at most once per minute, but
don't stop printing it after the fifth time. This way, we do not give
the impression that the problem has gone away.
Reviewed by: tegge
in the hardware interrupt context (even if it is likely just an
ithread). We don't document that suspend/resume routines are run from
such a context and some of the things that happen in those routines
aren't interrupt safe. Since there's no real need to run from that
context, this restores assumptions that suspend routines have made.
This fixes Thierry Herbelot's 'Trying to sleep while sleeping is
prohibited' problem.
nearly identical to wintel/ia32, with a couple of tweaks. Since it is
so similar to ia32, it is optionally added to a i386 kernel. This
port is preliminary, but seems to work well. Further improvements
will improve the interaction with syscons(4), port Linux nforce driver
and future versions of the xbox.
This supports the 64MB and 128MB boxes. You'll need the most recent
CVS version of Cromwell (the Linux BIOS for the XBOX) to boot.
Rink will be maintaining this port, and is interested in feedback.
He's setup a website http://xbox-bsd.nl to report the latest
developments.
Any silly mistakes are my fault.
Submitted by: Rink P.W. Springer rink at stack dot nl and
Ed Schouten ed at fxq dot nl
to user-space if a parameter named "errmsg" is passed into the iovec.
Used in conjunction with vfs_mount_error(), more useful error messages
than errno can be passed back to userspace when mounting a filesystem
fails.
Discussed with: phk, pjd
have started aio, instead, initialize aio management structure
if it hasn't been done, the reason to adjust this behavior is
to make it a bit friendly for threaded program, consider two
threads, one submits aio_write, and another just calls
aio_waitcomplete to wait any I/O to be completed and recycle the
aio requests, before submitter doing any I/O, the recycler wants
to wait in kernel. This also fixes inconsistency with other aio
syscalls.
This hasn't been true on i386 for at least a decade, probably longer, but
I'm too lazy to look up the exact year that PAE support was introduced.
Thus, this driver doesn't work on PAE.
X-MFC After: now
softc lists and associated mutex are now unused so these have been removed.
Calling if_clone_detach() will now destroy all the cloned interfaces for the
driver and in most cases is all thats needed to unload.
Idea by: brooks
Reviewed by: brooks
- Use curthread for calls to knlist_delete() and add a big comment
explaining why as well as appropriate assertions.
- Use TAILQ_FOREACH and TAILQ_FOREACH_SAFE instead of handrolling them.
- Use fget() family of functions to lookup file objects instead of
grovelling around in file descriptor tables.
- Destroy the aio_freeproc mutex if we are unloaded.
Tested on: i386
-Change unconditional aquisition of Giant to only pickup Giant if the vnode
for the controlling tty resides on a non-mpsafe file system.
-Pickup Giant around executable vnode reference counting operations only if
the executable resides on a non-mpsafe file system.
-If this process is being traced, pickup Giant for trace file reference count
operations only if it resides on a non-mpsafe file system.
Discussed with: jhb
Tested by: kris
