However, I've observed the active queue scan stopping when there are
frequent free page shortages and the inactive queue is steadily refilled
by other mechanisms, such as the sequential access heuristic in vm_fault()
or madvise(2). To remedy this problem, record the time of the last active
queue scan, and always scan a number of pages proportional to the time
since the last scan, regardless of whether that last scan was a
timeout-triggered ("pass == 0") or free-page-shortage-triggered ("pass >
0") scan.
Also, on a timeout-triggered scan, allow a full scan of the active queue
when the system is short of inactive pages.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
user address when ABI uses shared page.
Note that the change is no-op for correctness, since shared page does
not fault. The mapping for the shared page is installed at the
address space creation, the page is unmanaged and its pte/pv entry
cannot be reclaimed.
Submitted by: Oliver Pinter
Review: https://reviews.freebsd.org/D2954
MFC after: 1 week
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
o Provide an extensive set of assertions for input array of pages.
o Remove now duplicate assertions from different pagers.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
they coould be dirty. Move the handling if the invalid pages in the
inactive scan earlier.
Remove some code duplication in the scan by introducing the
'drop_page' label, which centralizes the object and the page unlock.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pages in vm_pageout_scan(). The reactivation rate of cache pages created
by vm_pageout_scan() is extremely low; typically no more than 0.5% to
2.25% of the pages are ever reactivated. At the same time, caching pages
is more expensive than freeing them. For example, in a test with
PostgreSQL, this change reduced the amount of time spent in the inactive
queue scan by 1/6.
Differential Revision: https://reviews.freebsd.org/D2805
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
in the requested array, then it is responsible for disposition of previous
page and is responsible for updating the entry in the requested array.
Now consumers of KPI do not need to re-lookup the pages after call to
vm_pager_get_pages().
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
correctly handle deallocation requests of two or more gigabytes in size.
Eventually, this would lead to a panic elsewhere in the kernel, such as
"vm_radix_insert: key <vm_pindex_t> is already present".
Reported by: Ilias Marinos
MFC after: 1 week
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
examined via 'vmstat -o'. It can be used to determine which files are
using physical pages of memory and how much each is using.
Differential Revision: https://reviews.freebsd.org/D2277
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc. (forward porting to HEAD/10)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
r283162.
Fix a cosmetic issue with vm_page_alloc() calling vm_page_free_toq()
with the page not completely satisfying vm_page_free() assertions.
The page is not owned by the object, since insertion failed. But
besides m->object reset to NULL, we should also set VPO_UNMANAGED flag
for consistency.
Reported by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
fragmented conditions currently just wakes up the pagedaemon. The
kmem arena is significantly smaller then the total available physical
memory, which means that there are loads where kmem arena space could
be exhausted, while there is a lot of pages available still. The
woken up pagedaemon sees vm_pages_needed != 0, verifies the condition
vm_paging_needed() which is false, clears the pass and returns back to
sleep, not calling neither uma_reclaim() nor lowmem handler.
To handle low kmem arena conditions, create additional pagedaemon
thread which calls uma_reclaim() directly. The thread sleeps on the
dedicated channel and kmem_reclaim() wakes the thread in addition to
the pagedaemon.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is ok since objects come from a NOFREE zone and allows objects to
be locked while traversing the object list without triggering a LOR.
Ensure that objects on the list are marked DEAD while free or stillborn,
and that they have a refcount of zero. This required updating most of
the pagers to explicitly mark an object as dead when deallocating it.
(Only the vnode pager did this previously.)
Differential Revision: https://reviews.freebsd.org/D2423
Reviewed by: alc, kib (earlier version)
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc.
a basic ACPI SLIT table parser.
For now this just exports the map via sysctl; it'll eventually be useful
to userland when there's more useful NUMA support in -HEAD.
* Add an optional mem_locality map;
* add a mapping function taking from/to domain and returning the
relative cost, or -1 if it's not available;
* Add a very basic SLIT parser to x86 ACPI.
Differential Revision: https://reviews.freebsd.org/D2460
Reviewed by: rpaulo, stas, jhb
Sponsored by: Norse Corp, Inc (hardware, coding); Dell (hardware)
should be done not with the number of pages in the first block, but with the
overall number of pages. While here, add KASSERT that makes sure that BMAP
doesn't return completely irrelevant blocks.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
in the main swapper work cycle, do it in the sysctl handler. This removes
extra mutex acquisition from the main cycle and makes the sysctl knob return
error on an invalid value, instead of accepting and fixing it.
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
a text file with a list of physical memory addresses to exclude, and have it
loaded at boot time via the provided example in loader.conf. The tunable
'vm.blacklist' remains, but using an external file means that there's no
practical limit to the size of the list. This change also improves the
scanning algorithm for processing the list, scanning the list only once
instead of scanning it for every page in the system. Both the sysctl and
the file can be unsorted and contain duplicates so long as each entry is
numeric (decimal or hex) and is separated by a space, comma, or newline
character. The sysctl 'vm.page_blacklist' is now provided to report what
memory locations were successfully excluded.
Reviewed by: imp, emax
Obtained from: Netflix, Inc.
MFC after: 3 days
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
Differential Revision: https://reviews.freebsd.org/D2369
Reviewed by: kib@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
users, myself included. The original code is likely papering over a
larger bug that needs to be explored, but for now get things back to
a working state.
Obtained from: Netflix, Inc.
MFC after: immediately
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
function that does the locking and validation associated with cleaning
a page. This moves 150 lines of code into its own function.
- Rename vm_pageout_clean() to vm_pageout_cluster() to define what it
really does; clustering nearby pages for pageout optimization.
Reviewd by: alc, kib, kmacy
Tested by: pho (earlier version)
Sponsored by: EMC / Isilon
that performs the equivalent of an automatic madvise(..., MADV_DONTNEED).
The current heuristic, even with the improvements that I made a few years
ago, is a good example of making the wrong trade-off, or optimizing for
the infrequent case. The infrequent case being reading a single file that
is much larger than memory using mmap(2). And, in this case, the page
daemon isn't the bottleneck; it's the I/O.
In all other cases, the current heuristic has too many false positives,
i.e., it caches too many pages that are later reused. To give one
example, thousands of pages are cached by the current heuristic during a
buildworld and all of them are reactivated before the buildworld
completes. In particular, clang reads source files using mmap(2) and
there are some relatively large source files in our source tree, e.g.,
sqlite, that are read multiple times. With the new heuristic, I see fewer
false positives and they have a much lower cost.
I actually tried something like this more than two years ago and it
didn't perform as well as the cache behind heuristic. However, that was
before the changes to the page daemon in late summer of 2013 and the
existence of pmap_advise(). In particular, with the page daemon doing
its work more frequently and in smaller batches, it now completes its
work while the application accessing the file is blocked on I/O.
Whereas previously, the page daemon appeared to hog the CPU for so long
that it caused "hiccups" in the application's execution.
Finally, I'll add that the elimination of cache pages is a prerequisite
for NUMA support.
Reviewed by: jeff, kib
Sponsored by: EMC / Isilon Storage Division
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
