architectures where they are known not to work. For SVN itself, use
the least common denominator and disable them across the board. This
allows svnlite to build and run on all FreeBSD architectures.
Approved by: re (gjb)
exhausted.
- Add a new protect(1) command that can be used to set or revoke protection
from arbitrary processes. Similar to ktrace it can apply a change to all
existing descendants of a process as well as future descendants.
- Add a new procctl(2) system call that provides a generic interface for
control operations on processes (as opposed to the debugger-specific
operations provided by ptrace(2)). procctl(2) uses a combination of
idtype_t and an id to identify the set of processes on which to operate
similar to wait6().
- Add a PROC_SPROTECT control operation to manage the protection status
of a set of processes. MADV_PROTECT still works for backwards
compatability.
- Add a p_flag2 to struct proc (and a corresponding ki_flag2 to kinfo_proc)
the first bit of which is used to track if P_PROTECT should be inherited
by new child processes.
Reviewed by: kib, jilles (earlier version)
Approved by: re (delphij)
MFC after: 1 month
This is actually a fully functional build except:
* All internal shared libraries are static linked to make sure there
is no interference with ports (and to reduce build time).
* It does not have the python/perl/etc plugin or API support.
* By default, it installs as "svnlite" rather than "svn".
* If WITH_SVN added in make.conf, you get "svn".
* If WITHOUT_SVNLITE is in make.conf, this is completely disabled.
To be absolutely clear, this is not intended for any use other than
checking out freebsd source and committing, like we once did with cvs.
It should be usable for small scale local repositories that don't
need the python/perl plugin architecture.
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
found in openssh's contrib directory.
This version has more features and is better written.
I intend to submit this upstream as well.
Reviewed by: bapt
Reviewed by: des
Approved by: cperciva
MFC after: 1 week
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
of FreeBSD's make by setting WITH_BMAKE. The WITH_BMAKE build makes it
easy for people to switch while working out the kinks -- think ports
tree here. The option will be removed in due time.
Submitted by: Simon Gerraty (sjg@juniper.net)
"bsdsort" and GNU sort will be the default "sort". When WITH_BSD_SORT
is set, BSD sort will be the default "sort" and GNU sort will be installed
as "gnusort".
This tool changes the default buffering behaviour of standard
stdio streams.
It only works on dynamic binaries. To make it work for static
ones it would require cluttering stdio because there no single
entry point.
PR: 166660
Reviewed by: current@, jhb
Approved by: kib (mentor)
MFC after: 1 week
The wtmpcvt(1) utility converts wtmp files to the new format used by
utmpx(3). Now that HEAD has been branched to stable/9 and 9.0 is
released, there is no need for it in HEAD.
MFC after: never
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.
The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be
'[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep
will be 'gnugrep'.
Discussed with: brooks
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
lower memory usage than GNU grep, GNU compatibility,
BSD license.
TODO: Performance is somewhat behind GNU grep but it is only
significant for bigger searches. The reason is complex, the
most important factor is that GNU grep uses lots of
optimizations to improve the speed of the regex library.
First, we need a modern regex library (practically by adopting
TRE), add support for GNU-style non-standard regexes and then
reevalute the performance issues and look for bottlenecks. In
the meantime, for those, who need better performance, it is
possible to build GNU grep by setting WITH_GNU_GREP.
Approved by: delphij (mentor)
Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
freegrep (http://github.com/howardjp/freegrep)
Sponsored by: Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to: fjoe (as SoC 2008 mentor),
everyone who helped in reviewing and testing
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
ports tree extensively and it is probably a good idea to keep it
regardless of NO_MAIL setting.
Reported by: Alexander Best
Reviewed by: antoine
X-MFC-With: r203584
compatibility level with the GNU counterparts and have shown to be mature
enough. For now, the GNU versions aren't removed from the tree, just detached
from the build.
Sponsored by: Google Summer of Code 2008
Portbuild run by: erwin
Approved by: delphij
This utility allows users to convert their wtmp databases to the new
format. It makes no sense for users to keep their wtmp log files if they
are unable to view them.
It basically copies ut_line into ut_id as well. This makes it possible
for last(1) and ac(8) to match login records with their corresponding
logout record.
While hacking on TTY code, I often miss a small utility to revoke my own
(pseudo-)terminals. This small utility is just a small wrapper around
the revoke(2) call, so you can destroy your very own login sessions.
Approved by: re
Some time ago Tom Rhodes sent me an email that he was willing to perform
various cleanups to the window(1) source code. After some discussion, we
both decided the best thing to do, was to move window(1) to the ports
tree. The application isn't used a lot nowadays, mainly because it has
been superseeded by screen, tmux, etc.
A couple of hours ago Tom committed window(1) to ports (misc/window), so
I'm removing it from the tree. I don't think people will really miss it,
but I'm describing the change in UPDATING anyway.
Discussed with: trhodes, pav, kib
Approved by: re
