- Fix slowness when operating over fast connections, where the timeout(9)
granularity is on the same order of magnitude as the round trip time.
timeout(9) can happen up to 1 tick early, which was causing receive
ack timeouts to happen too early, causing bogus "lost" packets.
- Increase the local time counter to 64 bits to avoid roll-over.
- Keep statistics on memory allocation failures.
- Add a new option to always include the ack when sending data packets.
Might be useful in high packet loss situations. Might not.
Correct the BUILD_TCL macro. It was placing the target id
in the wrong bits. This was only an issue for adapters that
do not perform SCB paging (aha-3940AUW for instance).
Don't bother inlining ahc_index_busy_tcl. It is never
used in a performance critical path and is a bit chunky.
Correct ahc_index_busy_tcl to deal with "busy target tables"
embedded in the latter half of 64byte SCBs.
Don't initialize the busy target table to its empty state
until after we have finished extracting configuration
information from chip SRAM. In the common case of using
16 bytes of chip SRAM to do untagged target lookups,
we were trashing the last 8 targets configuration data.
(actually only target 8 because of the bug in the
BUILD_TCL macro).
Cram the "bus reset delivered" message back under bootverbose.
Fix the cleanup of the SCB busy target table when aborting
commands. If the lun is wildcarded, we must loop through
all possible luns.
aic7xxx.h:
Only bother supporting 64 luns right now. It doesn't seem
like either this driver or any peripherals will be doing
information unit transfers (where the lun number is a
32 bit integer) any time soon.
aic7xxx.seq:
Fix support for the aic7895. We must flush the data
FIFO if performing a manual transfer that is not
a multiple of 8 bytes. We were doing this quite
regularly for embedded cdbs.
Manaually flush the fifo on earlier adapters when
dealing with embedded cdbs too. We were stuffing
the FIFO with 16 bytes instead, but triggering
the flush is more efficient and allows us to
remove two instructions from the "copy_to_fifo"
routine.
pcic_attach() got a wrong pointer to pcic_slots since device haven't
set correct unit number yet, so always accessed elements of pcic_slots
which belong to pcic0 (unit number 0).
Now we set unit number to pcic device first, then access to pcic_slots
based on the unit number we've just set.
which sets the inoinfo's i_parent and i_dotdot to 0, but they never get
set to ROOTINO. This means that propagate will never find lost+found and
its descendents, subdirectories will remain DSTATE (instead of DFOUND)
even though they *are* correctly linked in, and pass4.c will try to
clear them unsuccessfully, thinking that there is no link count from the
DSTATE directory's parent. The result is that you need to run fsck twice
and get link count increasing errors (which are unexpected and fatal
when running in preen mode). The fix is to set i_parent and i_dotdot to
"parent" after the second cacheino() call in dir.c:allocdir().
Obtained from: "Ethan Solomita" <ethan@geocast.com> (of the NetBSD Project)
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
Add spl/splx to various sensitive spots
Change semantics of the vmnet version of the device to keep VMware happy
(don't junk state when the device is closed)
Submitted by: vsilyaev@mindspring.com
a similar way to the way it can select messages from a given program.
Lines beginning with "+hostname" or "#+hostname" select messaes
from that hostname and lines beginning with "-hostname" or "#-hostname"
match messages not from that hostname.
There are some significant style issues left in the original program
selection code and the man page. This should be cleared up in some
later commits.
Reviewed by: sheldonh
Based on an original patch by: Bernd Walter <ticso@cicely8.cicely.de>
Man page stylist: sheldonh
diff output; there being no trailing newline caused it to bitch and
moan and ruin diffs. That's dumb, if I may say so myself.
Yes, this file is coming off the vendor branch. It hasn't been
updated in 6 years.
Approved by: peter
with the new snapshot code.
Update addaliasu to correctly implement the semantics of the old
checkalias function. When a device vnode first comes into existence,
check to see if an anonymous vnode for the same device was created
at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than
creating a new vnode for the device. This corrects a problem which
caused the kernel to panic when taking a snapshot of the root
filesystem.
Change the calling convention of vn_write_suspend_wait() to be the
same as vn_start_write().
Split out softdep_flushworklist() from softdep_flushfiles() so that
it can be used to clear the work queue when suspending filesystem
operations.
Access to buffers becomes recursive so that snapshots can recursively
traverse their indirect blocks using ffs_copyonwrite() when checking
for the need for copy on write when flushing one of their own indirect
blocks. This eliminates a deadlock between the syncer daemon and a
process taking a snapshot.
Ensure that softdep_process_worklist() can never block because of a
snapshot being taken. This eliminates a problem with buffer starvation.
Cleanup change in ffs_sync() which did not synchronously wait when
MNT_WAIT was specified. The result was an unclean filesystem panic
when doing forcible unmount with heavy filesystem I/O in progress.
Return a zero'ed block when reading a block that was not in use at
the time that a snapshot was taken. Normally, these blocks should
never be read. However, the readahead code will occationally read
them which can cause unexpected behavior.
Clean up the debugging code that ensures that no blocks be written
on a filesystem while it is suspended. Snapshots must explicitly
label the blocks that they are writing during the suspension so that
they do not cause a `write on suspended filesystem' panic.
Reorganize ffs_copyonwrite() to eliminate a deadlock and also to
prevent a race condition that would permit the same block to be
copied twice. This change eliminates an unexpected soft updates
inconsistency in fsck caused by the double allocation.
Use bqrelse rather than brelse for buffers that will be needed
soon again by the snapshot code. This improves snapshot performance.
of the buildkernel and installkernel targets where the kernel
was called after the config name.
While here, fix the brokenness of the installkernel target. It
used to use ${IMAKEENV}, but since that has a very restricted
PATH, it couldn't find make(1). Use ${CROSSENV} instead.
to construct a path that was long enough (ie longer than
SPARE_USRSPACE bytes) and trash the stack.
Note that SPARE_USRSPACE is much smaller than MAXPATHLEN so that
the Linuxulator will now return ENAMETOOLONG even if the path
is smaller than MAXPATHLEN.
PR: 12749
build process in too many cases. Adding mtree to bootstrap-tools
to solve this breaks the upgrade path because mtree needs a
libc that has strtofflags and fflagstostr.
