to r254304, we had separate functions for reclamation and laundering
(vm_pageout_scan) versus updating usage information, i.e., "reference
bits", on active pages (vm_pageout_page_stats), and we only performed
vm_req_vmdaemon(VM_SWAP_IDLE) if vm_pages_needed was true. However, since
r254303, if vm_swap_idle_enabled was "1", we have performed
vm_req_vmdaemon(VM_SWAP_IDLE) regardless of whether we are short of free
pages. This was unintended and too aggressive, so I suspect no one uses
this feature. With this change, we restore the historical behavior and
only perform vm_req_vmdaemon(VM_SWAP_IDLE) when we are short of free
pages.
Reviewed by: kib, markj
In particular, swapongeom_ev() needed event thread context when swap
pager configuration was performed under Giant and geom asserted that
Giant is not owned. Now both of the reason went away.
On the other hand, note that swpageom_release() is called from the
bio_done context, and possible close cannot be performed inline.
Also fix some minor issues. The swapgeom() function does not use the
td argument, remove it. Recheck that the vnode passed is still VCHR
and not reclaimed after the lock.
Reviewed by: mav
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
It is only needed when removing a full bucket from the per-CPU cache. The
bucket cache (uz_buckets) is protected by the zone mutex and thus the
critical section can be released before inserting into that list.
MFC after: 1 week
It's a threshold for v_free_count, which is of type u_int. This also lets
us get rid of a cast in vm_paging_needed().
Reviewed by: alc
MFC after: 1 week
optimizations into two distinct pieces. The first piece consists of the
code that should only be performed once per page fault and requires the map
to be locked. The second piece consists of the code that should be
performed each time a pager is called on an object in the shadow chain.
(This second piece expects the map to be unlocked.)
Previously, the entire implementation could be executed multiple times.
Moreover, the second and subsequent executions would occur with the map
unlocked. Usually, the ensuing unsynchronized accesses to the map were
harmless because the map was not changing. Nonetheless, it was possible for
a use-after-free error to occur, where vm_fault() wrote to a freed map
entry. This change corrects that problem.
Reported by: avg
Reviewed by: kib
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
if vnode is VMIO. For VMIO vnodes, set BO_DEAD in vm_object_terminate().
The vnode_destroy_object(), when calling into vm_object_terminate(),
must be able to flush buffers. BO_DEAD purpose is to quickly destroy
buffers on write when the underlying vnode is not operable any more
(one example is the devfs node after geom is gone). Setting BO_DEAD
for reclaiming vnode before object is terminated is premature, and
results in unability to flush buffers with live SU dependencies from
vinvalbuf() in vm_object_terminate().
Reported by: David Cross <dcrosstech@gmail.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
audit trail. This was not required for Common Criteria auditing
(which requires only that the intent to read or write be audited
at the time of open(2)), but is useful for contemporary live
analysis and forensics.
MFC after: 3 days
Sponsored by: DARPA, AFRL
read(2), write(2), dup(2), and mmap(2). This auditing is not
required by the Common Criteria (and hence was not being
performed), but is valuable in both contemporary live analysis
and forensic use cases.
MFC after: 3 days
Sponsored by: DARPA, AFRL
vm_offset_t. (This field is used to detect sequential access to the virtual
address range represented by the map entry.) There are three reasons to
make this change. First, a vm_offset_t is smaller on 32-bit architectures.
Consequently, a struct vm_map_entry is now smaller on 32-bit architectures.
Second, a vm_offset_t can be written atomically, whereas it may not be
possible to write a vm_pindex_t atomically on a 32-bit architecture. Third,
using a vm_pindex_t makes the next_read field dependent on which object in
the shadow chain is being read from.
Replace an "XXX" comment.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
of CPUs present. On amd64 this unbreaks the boot for systems with 92 or
more CPUs; the limit will vary on other systems depending on the size of
their uma_zone and uma_cache structures.
The major consumer of pages during UMA startup is the 19 zone structures
which are set up before UMA has bootstrapped itself sufficiently to use
the rest of the available memory: UMA Slabs, UMA Hash, 4 / 6 / 8 / 12 /
16 / 32 / 64 / 128 / 256 Bucket, vmem btag, VM OBJECT, RADIX NODE, MAP,
KMAP ENTRY, MAP ENTRY, VMSPACE, and fakepg. If the zone structures occupy
more than one page, they will not share pages and the number of pages
currently needed for startup is 19 * pages_per_zone + N, where N is the
number of pages used for allocating other structures; on amd64 N = 3 at
present (2 pages are allocated for UMA Kegs, and one page for UMA Hash).
This patch adds a new definition UMA_BOOT_PAGES_ZONES, currently set to 32,
and if a zone structure does not fit into a single page sets boot_pages to
UMA_BOOT_PAGES_ZONES * pages_per_zone instead of UMA_BOOT_PAGES (which
remains at 64). Consequently this patch has no effect on systems where the
zone structure fits into 2 or fewer pages (on amd64, 59 or fewer CPUs), but
increases boot_pages sufficiently on systems where the large number of CPUs
makes this structure larger. It seems safe to assume that systems with 60+
CPUs can afford to set aside an additional 128kB of memory per 32 CPUs.
The vm.boot_pages tunable continues to override this computation, but is
unlikely to be necessary in the future.
Tested on: EC2 x1.32xlarge
Relnotes: FreeBSD can now boot on 92+ CPU systems without requiring
vm.boot_pages to be manually adjusted.
Reviewed by: jeff, alc, adrian
Approved by: re (kib)
mp_maxid or CPU_FOREACH() as appropriate. This fixes a number of places in
the kernel that assumed CPU IDs are dense in [0, mp_ncpus) and would try,
for example, to run tasks on CPUs that did not exist or to allocate too
few buffers on systems with sparse CPU IDs in which there are holes in the
range and mp_maxid > mp_ncpus. Such circumstances generally occur on
systems with SMT, but on which SMT is disabled. This patch restores system
operation at least on POWER8 systems configured in this way.
There are a number of other places in the kernel with potential problems
in these situations, but where sparse CPU IDs are not currently known
to occur, mostly in the ARM machine-dependent code. These will be fixed
in a follow-up commit after the stable/11 branch.
PR: kern/210106
Reviewed by: jhb
Approved by: re (glebius)
objects.
Assert that there is no new waiters for the already terminated objects.
Old waiters should have been notified by the termination calling
vnode_pager_dealloc() (old/new are with regard of the lock acquisition
interval).
Only clear the vp->v_object for the case of already terminated object,
since other branches call vnode_pager_dealloc(), which should clear
the pointer. Assert this.
Tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
sleepable scan, iteration over the shadow chain looking for a page
could find an OBJ_DEAD object. Such state of the mapping is only
transient, the dead object will be terminated and removed from the
chain shortly. We must not return KERN_PROTECTION_FAILURE unless the
object type is changed to OBJT_DEAD in the chain, indicating that
paging on this address is really impossible. Returning
KERN_PROTECTION_FAILURE prematurely causes spurious SIGSEGV delivered
to processes, or kernel accesses to UVA spuriously failing with
EFAULT.
If the object with OBJ_DEAD flag is found, only return
KERN_PROTECTION_FAILURE when object type is already OBJT_DEAD.
Otherwise, sleep a tick and retry the fault handling.
Ideally, we would wait until the OBJ_DEAD flag is resolved, e.g. by
waiting until the paging on this object is finished. But to do so, we
need to reference the dead object, while vm_object_collapse() insists
on owning the final reference on the collapsed object. This could be
fixed by e.g. changing the assert to shared reference release between
vm_fault() and vm_object_collapse(), but it seems to be too much
complications for rare boundary condition.
PR: 204426
Tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
X-Differential revision: https://reviews.freebsd.org/D6085
MFC after: 2 weeks
Approved by: re (gjb)
waiters exist, same as for vm_page_xunbusy(). If previous value of
busy_lock was VPB_SINGLE_EXCLUSIVER, no waiters existed and wakeup is
not needed.
Move common code from vm_page_xunbusy_maybelocked() and
vm_page_xunbusy_hard() to vm_page_xunbusy_locked().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
There is an order between covered vnode lock and allproc_lock, which
is established by calling mountcheckdirs() while owning the covered
vnode lock. mountcheckdirs() iterates over the processes, protected by
allproc_lock. This order is needed and seems to be not avoidable.
On the other hand, various VM daemons also need to iterate over all
processes, and they lock and unlock user maps. Since unlock of the
user map may trigger processing of the deferred map entries, it causes
vnode locking to occur. Or, when vmspace is freed, dropping references
on the vnode-backed object also lock vnodes. We get reverted order
comparing with the mount/unmount order.
For VM daemons, there is no need to own allproc_lock while we operate
on vmspaces. If the process is held, it serves as the marker for
allproc list, which allows to continue the iteration.
Add _PHOLD_LITE() macro, similar to _PHOLD(), but not causing swap-in
of the kernel stacks. It is used instead of _PHOLD() in vm code,
since e.g. calling faultin() in OOM conditions only exaggerates the
problem.
Modernize comment describing PHOLD.
Reported by: lists@yamagi.org
Tested by: pho (previous version)
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 week
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D6679
statistics. Marking is done by setting the OBJ_ACTIVE flag. The
flags change is locked, but the problem is that many parts of system
assume that vm object initialization ensures that no other code could
change the object, and thus performed lockless. The end result is
corrupted flags in vm objects, most visible is spurious OBJ_DEAD flag,
causing random hangs.
Avoid the active object marking, instead provide equally inexact but
immutable is_object_alive() definition for the object mapped state.
Avoid iterating over the processes mappings altogether by using
arguably improved definition of the paging thread as one which sleeps
on the v_free_count.
PR: 204764
Diagnosed by: pho
Tested by: pho (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
Right now, all modifications of the list are locked by sw_alloc_mtx.
But initial lookup of the object by the handle in swap_pager_alloc()
is not protected by sw_alloc_mtx, which means that
vm_pager_object_lookup() could follow freed pointer.
Create a new named swap object with the OBJT_SWAP type, instead
of OBJT_DEFAULT. With this change, swp_pager_meta_build() never need
to upgrade named OBJT_DEFAULT to OBJT_SWAP (in the other place, we do
not forbid for client code to create named OBJT_DEFAULT objects at
all).
That change allows to remove sw_alloc_mtx and make the list locked by
sw_alloc_sx lock. Update swap_pager_copy() to new locking mode.
Create helper swap_pager_alloc_init() to consolidate named and
anonymous swap objects creation, while a caller ensures that the
neccesary locks are held around the helper.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (hrs)
Per the KASSERT at the beginning of the function, we expect that the page
does not belong to any object, so its object and pindex fields are
meaningless. Reset them in the rare case that vm_radix_insert() fails.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6669
With r284861, UMA zones use the trash ctor and dtor by default. This is
incompatible with memguard, which frees the backing page when the item
is freed. Modify the UMA debug functions to be no-ops if the item was
allocated from memguard. This also fixes constructors such as
mb_ctor_pack(), which invokes the trash ctor in addition to performing
some initialization.
Reviewed by: glebius
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D6562
acquire the page lock, which recurses. Avoid the recursion by reusing
the code from vm_page_remove() in a new helper
vm_page_xunbusy_maybelocked().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
indicate that threads are waiting for free pages to become available and
(2) to indicate whether a wakeup call has been sent to the page daemon.
The trouble is that a single flag cannot really serve both purposes, because
we have two distinct targets for when to wakeup threads waiting for free
pages versus when the page daemon has completed its work. In particular,
the flag will be cleared by vm_page_free() before the page daemon has met
its target, and this can lead to the OOM killer being invoked prematurely.
To address this problem, a new flag "vm_pageout_wanted" is introduced.
Discussed with: jeff
Reviewed by: kib, markj
Tested by: markj
Sponsored by: EMC / Isilon Storage Division
optimized copy-on-write faults. This has two advantages: (1) one less radix
tree operation is performed and (2) vm_page_replace_checked() cannot fail,
making the code simpler.
Submitted by: Ryan Libby
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4478
swap_pager_copy() might unlock the object, which allows the parallel
collapse to execute. Besides destroying the object, it also might
move the reference from parent to the backing object, firing the
assertion ref_count == 1.
Collapses are prevented by bumping paging_in_progress counters on both
the object and its backing object.
Reported by: cem
Tested by: pho (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D6085
for empty page cache when the object type if OBJT_VNODE.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
freed page as VPO_UNMANAGED. Otherwise vm_pge_free_toq() insists on
owning the page lock.
Previously, VPO_UNMANAGED was only set up to the last processed page.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Existing issue of not protecting pager_object_list iteration in
vm_pager_object_lookup() by sw_alloc_mtx is not affected by Giant
removal.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
is actually the opposite of that stated in the comment.
Remove an unnecessary assignment. Use an assertion to document the fact
that no assignment is needed.
Rewrite another comment to clarify that the page is not completely valid.
Reviewed by: kib
the current offset (spelled: "fs.pindex") until it is known whether a
backing object exists. In fact, if not for the fact that the backing
object offset is zero when there is no backing object, this update would
produce a broken offset.
Reviewed by: kib
Add a pair of bus methods that can be used to "map" resources for direct
CPU access using bus_space(9). bus_map_resource() creates a mapping and
bus_unmap_resource() releases a previously created mapping. Mappings are
described by 'struct resource_map' object. Pointers to these objects can
be passed as the first argument to the bus_space wrapper API used for bus
resources.
Drivers that wish to map all of a resource using default settings
(for example, using uncacheable memory attributes) do not need to change.
However, drivers that wish to use non-default settings can now do so
without jumping through hoops.
First, an RF_UNMAPPED flag is added to request that a resource is not
implicitly mapped with the default settings when it is activated. This
permits other activation steps (such as enabling I/O or memory decoding
in a device's PCI command register) to be taken without creating a
mapping. Right now the AGP drivers don't set RF_ACTIVE to avoid using
up a large amount of KVA to map the AGP aperture on 32-bit platforms.
Once RF_UNMAPPED is supported on all platforms that support AGP this
can be changed to using RF_UNMAPPED with RF_ACTIVE instead.
Second, bus_map_resource accepts an optional structure that defines
additional settings for a given mapping.
For example, a driver can now request to map only a subset of a resource
instead of the entire range. The AGP driver could also use this to only
map the first page of the aperture (IIRC, it calls pmap_mapdev() directly
to map the first page currently). I will also eventually change the
PCI-PCI bridge driver to request mappings of the subset of the I/O window
resource on its parent side to create mappings for child devices rather
than passing child resources directly up to nexus to be mapped. This
also permits bridges that do address translation to request suitable
mappings from a resource on the "upper" side of the bus when mapping
resources on the "lower" side of the bus.
Another attribute that can be specified is an alternate memory attribute
for memory-mapped resources. This can be used to request a
Write-Combining mapping of a PCI BAR in an MI fashion. (Currently the
drivers that do this call pmap_change_attr() directly for x86 only.)
Note that this commit only adds the MI framework. Each platform needs
to add support for handling RF_UNMAPPED and thew new
bus_map/unmap_resource methods. Generally speaking, any drivers that
are calling rman_set_bustag() and rman_set_bushandle() need to be
updated.
Discussed on: arch
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
cleanup consists of fixes to comments. However, there is one change to
code: Remove special-case handling of errors involving the kernel map.
We do not perform I/O on the kernel map, so there is no need for this
special case.
Reviewed by: kib (an earlier version)
pq_vcnt, as a count of real things, has no business being negative. It is only
ever initialized by a u_int counter.
The warning came from the atomic_add_int() in vm_pagequeue_cnt_add().
Rectify the warning by changing the variable to u_int. No functional change.
Suggested by: Clang 3.3
Sponsored by: EMC / Isilon Storage Division
