Commit Graph

344 Commits

Author SHA1 Message Date
marcel
130ba03346 Add __elfN(relocation_offset). It holds the offset between the virtual
(link) address and the physical (load) address. Ideally, the mapping
between link and load addresses should be abstracted by the copyin(),
copyout() and readin() functions, so that we don't have to add kluges
in __elfN(loadimage)(). Then, we could also have paged virtual memory
for the kernel. This can be important under EFI, where you need to
allocate physical memory form the firmware if you want to work in all
scenarios.
2008-02-23 18:33:50 +00:00
ru
4780de32f2 Document the per-arch default value of kern.maxbcache. 2007-11-08 11:59:38 +00:00
jhb
a7b201ee6d Use the smaller cgbase() macro in ufsread.c if UFS_SMALL_CGBASE is
defined.  This lets each boot program choose which version of cgbase() it
wants to use rather than forcing ufsread.c to have that knowledge.

MFC after:	1 week
Discussed with:	imp
2007-10-26 21:02:31 +00:00
imp
e99b1842b7 The arm boot code uses this function as well. Redefining cgbase()
saves about 500 bytes in the boot code.  While the AT91RM9200 has 12k
of space for the boot loader, which is more than i386's 8k, the code
generated by gcc is a bit bigger.

I've had this in p4 for about two years now.
2007-10-26 15:00:34 +00:00
jhb
2f8a906c36 First cut at support for booting a GPT labeled disk via the BIOS bootstrap
on i386 and amd64 machines.  The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot.  /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel.  Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type.  This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k.  However,
it is limited in that it can only be 545k.  That's still a lot better than
the current 7.5k limit for boot2 on MBR.  gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader.  Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
  /boot/pmbr and /boot/gptboot.  Note that the disk must have some free
  space for the boot partition.
  - This required exposing the backend of the 'add' function as a
    gpt_add_part() function to the rest of gpt(8).  'boot' uses this to
    create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
  it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
  unlike boot1 since /boot/pmbr loads all of gptboot up front.  The
  C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
  The primary changes are to parse the GPT to find a root filesystem
  and to use 64-bit disk addresses.  Currently gptboot assumes that the
  first UFS partition on the disk is the / filesystem, but this algorithm
  will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
  GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
  similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.

MFC after:	1 month
Discussed with:	marcel (some things might still change, but am committing
			what I have so far)
2007-10-24 21:33:00 +00:00
obrien
22ca0708f9 Also boot *.debug if everything else fails.
Approved by:	re(gnn)
2007-10-04 18:29:52 +00:00
sepotvin
b4394c2c3f Add documentation for the vm.kmem_size_min and vm.kmem_size_max tunables.
Approved by: njl (mentor, blanket)
2007-05-09 02:37:58 +00:00
jmg
bd12433a5f fixup talk of kern.maxswzone... It's been 32MB for almost 5 years now...
and only supports just over 7GB of swap...

Sound a bit more professional..

Inspired by:	Marc G. Fournier
MFC After:	3 days
2007-05-05 17:36:42 +00:00
imp
98f50a3dfb Document the init_chroot and init_script variables.
# I didn't check the markup too closely, so doc people, please check

Submitted by: Oliver Fromme
2007-02-04 06:35:10 +00:00
marius
1d842041db Garbage collect the code for auto-loading modules based on ISAPNP IDs,
which is #if'ed out since nearly eight years, along with its outdated
database.

Agreed by:	ru (some months ago)
2007-01-07 22:25:45 +00:00
kmacy
f94653c6cc add an interface for passing the entire kernel size up front to the
loader so that it can memory can be allocated aligned at the beginning of
the desired large page
2006-12-18 07:35:14 +00:00
yar
7a8aafd20a Note that not all architectures use sendfile(2) buffers;
refer to the respective manpage for details.

MFC after: 3 days
2006-11-29 05:53:25 +00:00
ru
369ac0052b Unbreak compile with ELF_VERBOSE defined, and fix format warnings. 2006-11-02 17:52:43 +00:00
ru
72eb46ae51 Revert the last change. Masking only 2 MSBs of the virtual address
to get the physical address doesn't work for all values of KVA_PAGES,
while masking 8 MSBs works for all values of KVA_PAGES that are
multiple of 4 for non-PAE and 8 for PAE.  (This leaves us limited
with 12MB for non-PAE kernels and 14MB for PAE kernels.)

To get things right, we'd need to subtract the KERNBASE from the
virtual address (but KERNBASE is not easy to figure out from here),
or have physical addresses set properly in the ELF headers.

Discussed with:	jhb
2006-11-02 17:28:38 +00:00
marcel
dc91b1990a Extend struct devdesc with a unit field, called d_unit. Promote the
device (kind) specific unit field to the common field. This change
allows a future version of libefi to work without requiring anything
more than what is defined in struct devdesc and as such makes it
possible to compile said version of libefi for different platforms
without requiring that those platforms have identical derivatives
of struct devdesc.
2006-11-02 01:23:18 +00:00
marcel
342a196627 Don't unconditionally compile-in the bcache code. It's only used on
i386/amd64 and pc98. Remove useless calls to bcache_init() from the
ia64 and sparc64 loaders, as well as from the OFW common code.
2006-11-02 00:26:45 +00:00
marcel
a1fe87f061 o Make sure to clear f->f_devdata if d_dev->dv_open() fails. It
would otherwise cause devclose() to free() the memory again.
o  Refactor devopen() so that it's more readable.
2006-11-02 00:02:22 +00:00
ru
f0e19d90c0 Because the BTX mini-kernel now uses flat memory mode and clients
are no longer limited to a virtual address space of 16 megabytes,
only mask high two bits of a virtual address.  This allows to load
larger kernels (up to 1 gigabyte).  Not masking addresses at all
was a bad idea on machines with less than >3G of memory -- kernels
are linked at 0xc0xxxxxx, and that would attempt to load a kernel
at above 3G.  By masking only two highest bits we stay within the
safe limits while still allowing to boot larger kernels.

(This is a safer reimplmentation of sys/boot/i386/boot2/boot.2.c
rev. 1.71.)

Prodded by:	jhb
Tested by:	nyan (pc98)
2006-10-29 14:50:58 +00:00
ru
c43e76ed8f Replace a rarely used "depuration" with "debugging".
PR:		docs/85127
Submitted by:	Gary W. Swearingen (partially)
MFC after:	3 days
2006-10-13 20:48:17 +00:00
ru
a41116404c Fix WARNS=2 warnings. 2006-09-29 20:57:38 +00:00
jhb
1817594458 Ignore a sub-topic match if it is inside the command description.
Otherwise, merge-help can get confused by a command description that
includes a word that starts with a capital S.

MFC after:	1 week
2006-09-28 19:06:20 +00:00
ru
22b7409ade Make the default "init_path" value breakable, so it fits on the
screen's width, thus eliminating a groff(1) warning.

Suggested by:	marck
2006-08-20 09:31:17 +00:00
marck
0d5e6d6efe kern.ipc.nmbclusters is sysctl, not compile-time option. Change Dv to Va.
Touch .Dd.

Pointed out by:	ru
MFC after:	1 week
2006-08-18 10:15:01 +00:00
marck
908b7097ec Remove references to NMBCLUSTERS which is obsoleted.
PR:		100427
Approved by:	maxim
MFC after:	1 week
2006-08-18 08:03:06 +00:00
jhb
6ecdc538b9 Remove more Alpha bits from the boot code including fixing several
stale comments.
2006-05-12 04:09:53 +00:00
marius
c40cc2b1b3 In moduledir_readhints() cast the value returned by sizeof() to ssize_t
when checking whether it's greater than a struct stat st_size in order
to also catch the case when st_size is -1. Previously this check didn't
trigger on sparc64 when st_size is -1 (as it's the case for a file on
a bzipfs, TFTP server etc.), causing the content of the linker hints
file to be copied to memory referenced by a null-pointer.

PR:		91231
MFC after:	1 week
2006-01-12 13:18:49 +00:00
marcel
0a081d09f4 Make our ELF64 type definitions match standards. In particular this
means:
o  Remove Elf64_Quarter,
o  Redefine Elf64_Half to be 16-bit,
o  Redefine Elf64_Word to be 32-bit,
o  Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o  Use Elf_Size in MI code to abstract the difference between
   Elf32_Word and Elf64_Word.
o  Add Elf_Ssize as the signed counterpart of Elf_Size.

MFC after: 2 weeks
2005-12-18 04:52:37 +00:00
ru
a3403464c0 Add loader(8) variables for RB_DFLTROOT, RB_MUTE, and RB_PAUSE:
"boot_dfltroot", "boot_mute", and "boot_pause" respectively.
2005-09-22 15:06:58 +00:00
iedowse
11293f3595 Add a "comconsole_speed" loader variable that can be used to change
the serial console speed (i386 and amd64 only). If the previous
stage boot loader requested a serial console (RB_SERIAL or RB_MULTIPLE)
then the default speed is determined from the current serial port
speed. Otherwise it is set to 9600 or the value of BOOT_COMCONSOLE_SPEED
at compile time.

This makes it possible to set the serial port speed once in
/boot.config and the setting will propagate to boot2, loader and
the kernel serial console.
2005-08-18 01:39:43 +00:00
brian
bea55b64d3 Fix a comparison that broke ``set console=vidconsole'' and even the
loader.conf line ``console="vidconsole"''.

Sponsored by:	ActiveState/Sophos
MFC after:	1 week
2005-07-29 12:47:42 +00:00
jmg
951c90fccb remove a pointless comment with a more helpful one...
Submitted by:	Tobias Roth
MFC after:	5 days
2005-07-25 17:18:25 +00:00
ru
0bdf9fcd67 Improved markup, fixes some spelling and grammar.
Approved by:	re (blanket)
2005-06-14 08:49:14 +00:00
ru
18fac9a47f Markup nits. 2005-05-30 12:33:04 +00:00
jhb
65ffcee053 - Add support to the loader for multiple consoles.
- Teach the i386 and pc98 loaders to honor multiple console requests from
  their respective boot2 binaries so that the same console(s) are used in
  both boot2 and the loader.
- Since the kernel doesn't support multiple consoles, whichever console is
  listed first is treated as the "primary" console and is passed to the
  kernel in the boot_howto flags.

PR:		kern/66425
Submitted by:	Gavin Atkinson gavin at ury dot york dot ac dot uk
MFC after:	1 week
2005-05-27 19:31:00 +00:00
sobomax
9005b02e0e Extend `autoboot_delay' handling - is this variable is set to -1 don't allow
user to interrupt autoboot process at all. Currently, even when
`autoboot_delay' is set to 0, loader(8) still allows autoboot process to be
interrupted by pressing any key on the console when the loader reads kernel
and modules from the disk. In some cases (i.e. untrusted environment) such
behaviour is highly indesirable and user should not be allowed to interfere
with the autoboot process at all.

Sponsored by:	PBXpress Inc.
MFC after:	3 days
2005-05-19 23:03:02 +00:00
sobomax
5faad03639 Whitespace only: kill trailing spaces. 2005-05-19 05:15:08 +00:00
des
a2901d4c5e Document the new default init_path.
Reminded by:	ru
MFC after:	2 weeks
2005-02-17 11:14:45 +00:00
rwatson
45a522314a Insert an explicit McAfee license, as we use a stock two-clause BSD
license rather than the slightly custom licence in ufsread.c.
2005-01-30 14:58:00 +00:00
scottl
3b185ba05b Remove the last vestiges of the userconfig option. None of this actually
did anything, so this commit should be considered a NO-OP.
2004-12-01 04:59:33 +00:00
ru
fe9c31f6ff There's no reason for "read" and "echo" commands to not
appear in the online command list.
2004-11-13 17:04:55 +00:00
ru
6261ed946f Pass the "?" command output through the pager.
(This doesn't quite work as this command is overridden by Forth,
and some Forth commands are appended to the output.)
2004-11-12 13:27:49 +00:00
ru
5548c1bc7a Collapse several adjacent .if's into .if/.elif. 2004-10-24 12:32:41 +00:00
nyan
0a4bbdbd31 ELF64 support is not needed on pc98. 2004-10-24 12:18:11 +00:00
imp
2756c19f61 document host_start_mem.
# feel free to wordsmith.

Suggested by: ru@
2004-10-15 06:59:07 +00:00
ru
29e5c34577 Polish the last change. 2004-10-15 06:44:13 +00:00
imp
a76b21d1d4 Document hw.{pci,acpi}.host_start_mem
Requested by: ru@
2004-10-15 00:15:07 +00:00
pjd
c944ef39d6 Back out changes which were introduced to delay mounting root file system.
Those changes were made on gmirror needs, but now gmirror handles this
by itself.
2004-10-05 11:26:43 +00:00
stefanf
2594b3ec4c Use the correct printf specifier.
PR:	47187
2004-10-03 16:34:01 +00:00
ru
6131d82787 The "autoboot" command also has a third (optional) parameter. 2004-10-01 00:15:13 +00:00
ru
bad5ef964a Don't give instructions on how to disable ACPI in the MI section.
For novice users, beastie.4th can just do it.  Expert users can
read ACPI instructions by typing "help ACPI".
2004-09-30 21:57:16 +00:00