As the pmamp_change_attr() is public on arm64 since r351131, it can be
used on the arm64 to map memory range as with the write combined
attribute.
It requires the driver to use generic VM_MEMATTR_WRITE_COMBINING flag
instead of the x86 specific PAT_WRITE_COMBINING.
Differential Revision: https://reviews.freebsd.org/D21931
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
ENAv2 introduces many new features, bug fixes and improvements.
Main new features are LLQ (Low Latency Queues) and independent queues
reconfiguration using sysctl commands.
The year in copyright notice was updated to 2019.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For easier debugging, the reset is being triggered and the reset reason is
being set only in case it is done for the first time. Such approach will
ensure that the first reset reason is not going to be overwritten and
will make it easier for debugging.
Also, add a reset trigger upon invalid Tx requested ID.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the call to ena_up() in ena_restore_device() fails, next usage of
`ifconfig up` will cause NULL pointer dereference.
This patch adds additional checks to prevent that.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Some messages were missing new line character and traces were not having
unified behavior. To fix that, each trace and printout should add new
line character at the end of each string - that should improve
readability.
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the headers of the packets are split into multiple segments of the
mbuf chain, the previous version of ena_tx_csum which was assuming,
that all segments will lay in the first mbuf, will eventually fail to
map the headers properties to meta descriptor.
That will cause Tx checksum offload to do not work and was leading to
memory corruption. It could even cause the crash of the system.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For alignment with Linux driver and better handling ena_detach(), the
reset is now calling ena_device_restore() and ena_device_destroy().
The ena_device_destroy() is also being called on ena_detach(), so the
code will be more readable.
The watchdog is now being activated after reset only, if it was active
before.
There were added additional checks to ensure, that there is no race with
the link state change AENQ handler.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA can have multiple states turned on/off, it is more convenient
to store them in single bitfield instead of multiple boolean variables.
The bitset FreeBSD API was used for the bitfield implementation, as it
provides flexible structure together with API which also supports atomic
bitfield operations.
For better readability basic macros from API were wrapped into custom
ENA_FLAG_* macros, which are filling up common parameters for all calls.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Before the patch, error handling was not releasing all resources and
was not issuing device reset if the reset task failed.
That could cause memory leak and fault of the device.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The host info bdf field is the abbreviation for the bus, device,
function of the PCI on which the device is being attached to.
Now the driver is filling information about that using FreeBSD RID
resource.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ENA HAL is introducing API, which can determine on Tx path if
the doorbell is needed.
That way, it can tell the driver, that it should call an doorbell.
The old threshold value wasn't removed, as not all HW is supporting this
feature - so it was reworked to also work with the new API.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The Rx ring size can be as high as 8k. Because of that we want to limit
the cleanup threshold by maximum value of 256.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
LLQ (Low Latency Queue) is the feature, that allows pushing header
directly to the device through PCI before even DMA is triggered.
It reduces latency, because device can start preparing packet before
payload is sent through DMA.
To speed up sending data through PCI, the Write Combining is enabled,
which allows hardware to buffer data before sending them on the PCI - it
allows to reduce number of PCI IO operations.
ENAv2 is using special descriptor for the negotiation of the LLQ.
Currently, only the default configuration is supported.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Handle IO interrupts using filter routine. That way, the main cleanup
task could be moved to the separate thread using taskqueue.
The deferred Rx cleanup task was removed, and now the cleanup task is
begin called instead. That way, the Rx lock could be removed.
In addition, Queue management (wake up and stop TX ring) was added, so
the TX cleanup task can be performed mostly lockless.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The driver now supports per adapter tuning of buffer ring size and HW Rx
ring size.
It can be achieved using sysctl node dev.ena.X.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the requested ID was out of range, the tx_info structure was NULL and
the function was trying to access the field of the NULL object.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The if_detach was causing crash if the MSI-x configuration in the attach
failed. To prevent this issue, the ifnet is being configured at the end
of the attach function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
In rare case, when the ifconfig is called just before kldunload, it is
possible, that ena_up routine will be called after queue locks are
released.
To prevent that, ifp is detached before the last ena_down is called and
further, the ifp is freed at the end of the function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The ENA driver needs at least 2 MSI-x - one for admin queue, and one for
IO queues pair. If there were not enough resources to allocate more than
one MSI-x, the device should not be attached.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
bus_alloc_resource_any() is not returning error value in case of an
error.
If the function call fails, the error value was not passed to the
ena_up() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
To prevent errors from assigning values from the DMA structure in case
of an error, zero the vaddr and paddr values upon failure.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The DMA in FreeBSD requires explicit synchronization. ENA driver was
only doing PREREAD and PREWRITE synchronizations. Missing
bus_dmamap_sync() calls were added.
It is also required to synchronize DMA engine before unloading DMA map.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the first MSI-x won't be executed, then the timer service will detect
that and trigger device reset.
The checking for missing Tx completion was reworked, so it will also
check for missing interrupts. Checking number of missing Tx completions
can be performed after loop, instead of checking it every iteration.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ena_com allows the number of CPUs to be passed to the device in
the host info structure as a hint.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Information about Tx error should be only displayed, if packet
preparation failed due to error other than out of memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Whenever the driver will receive too many descriptors from the device,
it should trigger the device reset, as it is indicating that the device
is in invalid state.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Receive Side Scaling is optional feature that could be enabled in kernel
configuration by defining flag RSS.
Kernel uses hash to store and find protocol control block which is
stored in hash tables.
Kernel and NIC hash functions must be consistent. Otherwise case lookup
fails.
To achieve this kernel provides API to set proper hash key to NIC.
As it is not possible to change key for virtual ENA NIC, this driver
cannot support RSS function.
ENA is designed to work in virtual environments so supporting hardware
version of this card is unnecessary.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Notification AENQ handler is responsible for handling requests from ENA
device. Missing Tx threshold, Tx timeout and keep alive timeout can be
set using hints from the aenq descriptor which can be delivered in the
ENA admin notification.
The queue suspending and resuming tasks are not supported by the
driver.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
ENA_ADMIN_FATAL_ERROR and ENA_ADMIN_WARNING aenq groups were indicated
as supported, so the unimplemented_aenq_handler() will print out error
message, whenever an error will occur within the ENA admin context.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA is working only in virtualized environment, the active media
is not specified. Instead, the active link type is set as unknown.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Recent HAL change preparing to support ENAv2 required minor driver
modifications.
The ena_com_sq_empty_space() is not available in this ena-com, so it had
to be replaced with ena_com_free_desc().
Moreover, the ena_com_admin_init() is no longer using 3rd argument
indicating if the spin lock should be initialized, so it was removed.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The resource is already being activated in the bus_alloc_resource(),
because the flag RF_ACTIVE is being passed.
Double activation on arm64 is causing kernel panic.
Version of the driver was upgraded to 0.8.4.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reported-by: Greg V <greg@unrelenting.technology>
Tested-by: cperciva, Greg V <greg@unrelenting.technology>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Differential revision: https://reviews.freebsd.org/D19655
In out of order mode Rx buffer are accesses by req_id.
Accessing and validating mbuf using ntc is causing false error.
Increase driver revision after latest RX OOO completion fixes.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
MFC after: 1 week
Requested ID should be validated when the packet is received and not
when the driver is repopulating the mbufs.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
MFC after: 1 week
In FreeBSD, this is normal situation that the Tx ring is being full. In
hat case, the packet is put back into drbr and the next attempt to send
it is taken after the cleanup.
Too much logs like this can cause system instability and even cause the
device reset (because keep alive or cleanup could be missed).
To fix that, the log level of this message is changed to debug.
Upon this change upgrade the driver version to v0.8.2.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.
It's easy to apply/reapply when churn dies down.
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Make unsigned values uint16_t for pnp table. They are properly
uint16_t befause they are 16-bit PCI IDs. The PNP_INFO language has no
type for bare unsigned.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
Header length is optional hint for the ENA device. Because It is not
guaranteed that every packet header will be in the first mbuf
segment, it is better to skip passing any information. If the header
length will be indicating invalid value (different than 0), then the
packet will be dropped.
This kind situation can appear, when the UDP packet will be fragmented
by the stack in the ip_fragment() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reported by: Krishna Yenduri <kyenduri@brkt.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
On AWS, a network interface can get reinitialized every 30 minutes due
to the MTU being (re)set when a new DHCP lease is obtained. This can
cause packet drop, along with annoying syslog messages.
Skip setting the MTU in the ena driver if the new MTU is the same as the
old MTU. Note this fix is already in the netfront driver.
Testing: Verified ena up/down messages do not appear every 30 min in
/var/log/messages with the fix in place.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
With the current state of the AENQ handlers in the ENA driver, only
implemented handlers should be indicated.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12872
Using only 1 descriptor on RX could be an issue, if system would be low
on resources and could not provide driver with large chunks of
contiguous memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12871
The device now provides driver with max available MTU value it
can handle.
The function setting MTU for the interface was simplified and reworked
to follow up this changes.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12870
The maximum number of io_cq was the same number as maximum io_sq
indicated by the device working in normal mode (without LLQ).
It is not always true, especially when LLQ is being enabled.
Fix it.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12869
The driver was printing out a lot of information upon failure, which
does not have to be interested for the user.
Changing logging level required to rebuild driver with proper flags. The
proper sysctl was added, so the level now can be changed dynamically
using bitmask.
Levels of printouts were adjusted to keep on mind end user instead of
debugging purposes.
More verbose messages were added to align the driver with the Linux.
Fix building error introduced by the r325506 by casting csum_flags to
uint64_t.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12868
This bug wasn't impacting anything, because both enums are indicating
the same value, but it could cause a problem on API change.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12867
The gcc compiler is more sensitive when variable is having an value
assigned, but it is not used anywhere further.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12866
