hose your system. You end up with just about everything statically linked
(except for libpam.so), which then causes all the pam users to fail.
eg: login, sshd, su etc all stop working because dlopen no longer works
because there is no libc.so in memory anymore.
gcc passes -L/usr/lib to ld. The /usr/lib/libxxx.so symlink is *not* a
compatability link. It is actually the primary link. There should be no
symlinks in /lib at all. Only /lib/libXX.so.Y.
peter@daintree[9:27pm]/usr/bin-104> file yppasswd
yppasswd: setuid ELF 32-bit LSB executable, Intel 80386, version 1 (FreeBSD), for FreeBSD 5.1.1, dynamically linked (uses shared libs), stripped
peter@daintree[9:27pm]/usr/bin-105> ldd yppasswd
yppasswd:
libpam.so.2 => /usr/lib/libpam.so.2 (0x280d1000)
peter@daintree[9:28pm]/usr/bin-106>
Note no libc.so.5. Hence libpam.so.2 has unresolved dependencies.
I believe this is also the cause of the recent buildworld failures when
pam_krb5.so references -lcrypto stuff etc and when librpcsvc.so references
des_setparity() etc.
This change could not possibly have worked, unless there are other missing
changes to the gcc configuration. It won't work with ports versions of
gcc either.
out of cdregister() and daregister(), which are run from interrupt context.
The sysctl code does blocking mallocs (M_WAITOK), which causes problems
if malloc(9) actually needs to sleep.
The eventual fix for this issue will involve moving the CAM probe process
inside a kernel thread. For now, though, I have fixed the issue by moving
dynamic sysctl variable creation for these two drivers to a task queue
running in a kernel thread.
The existing task queues (taskqueue_swi and taskqueue_swi_giant) run in
software interrupt handlers, which wouldn't fix the problem at hand. So I
have created a new task queue, taskqueue_thread, that runs inside a kernel
thread. (It also runs outside of Giant -- clients must explicitly acquire
and release Giant in their taskqueue functions.)
scsi_cd.c: Remove sysctl variable creation code from cdregister(), and
move it to a new function, cdsysctlinit(). Queue
cdsysctlinit() to the taskqueue_thread taskqueue once we
have fully registered the cd(4) driver instance.
scsi_da.c: Remove sysctl variable creation code from daregister(), and
move it to move it to a new function, dasysctlinit().
Queue dasysctlinit() to the taskqueue_thread taskqueue once
we have fully registered the da(4) instance.
taskqueue.h: Declare the new taskqueue_thread taskqueue, update some
comments.
subr_taskqueue.c:
Create the new kernel thread taskqueue. This taskqueue
runs outside of Giant, so any functions queued to it would
need to explicitly acquire/release Giant if they need it.
cd.4: Update the cd(4) man page to talk about the minimum command
size sysctl/loader tunable. Also note that the changer
variables are available as loader tunables as well.
da.4: Update the da(4) man page to cover the retry_count,
default_timeout and minimum_cmd_size sysctl variables/loader
tunables. Remove references to /dev/r???, they aren't used
any longer.
cd.9: Update the cd(9) man page to describe the CD_Q_10_BYTE_ONLY
quirk.
taskqueue.9: Update the taskqueue(9) man page to describe the new thread
task queue, and the taskqueue_swi_giant queue.
MFC after: 3 days
are supported by the driver.
- Use a list to specify which cards are supported.
- Add the 3c592/3c597 EISA cards to the list of supported cards.
PR: docs/56086 (based on)
Submitted by: Lukas Ertl <l.ertl@univie.ac.at>
buildworld targets by default, but allow it to be done for all user
targets by introducing a boolean option, named ALWAYS_CHECK_MAKE.
This change is by no means perfect and I don't even want to claim
this to be a solution. It does however address the fact that not
everybody likes to see make(1) rebuilt simply because the regression
test failed for some reason or other, including pilot error. It
therefore serves the purpose of keeping the crowd happy until we
have something better or simply reached a compromise.
The reasons for changing the default behaviour are:
o It avoids a negative, possibly non-intuitive option,
o It's according to POLA and fond of feet,
o Only buildworld is documented to do its best to be
successful at reasonably cost.
Reviewed by: gad, imp, obrien, peter
Change the manual page title to use the device family name (Rhine),
since the list of supported device id's won't fit on one line anymore.
Submitted by: Lukas Ertl <l.ertl@univie.ac.at> (based on) [1]
PR: docs/55639 (based on) [1]
Confirmed by: driver source code [1]
MFC after: 3 days
names in Amharic instead of English.
Also, remove some extra names I had previously considered
including. They don't make sense since the calendar names
don't match up.
specific interfaces. This is required by aodvd, and may in future help us
in getting rid of the requirement for BPF from our import of isc-dhcp.
Suggested by: fenestro
Obtained from: BSD/OS
Reviewed by: mini, sam
Approved by: jake (mentor)
are created in the correct location. Always make them. For libraries
that live in /lib, this causes a /lib/libfoo.so and a compatibility
/usr/lib/libfoo.so to be created. We may want to drop the
/usr/lib/libfoo.so symlink at some future point.
need relative pathing to work correctly. This is s necessary step
for putting libraries in /lib while the .so symlinks still live
in /usr/lib.
This should be a big NOOP in the case where SHLIBDIR == LIBDIR.
use the atmconfig(8) utility instead of route(8) to install those routes.
For this we need a new rc.conf variable natm_static_routes that works
just like static_routes except that the referenced routes use the syntax
of atmconfig(8).
Okay'ed by: mtm
new ATMIOCOPENVCC/CLOSEVCC. This allows us to not only use UBR channels
for IP over ATM, but also CBR, VBR and ABR. Change the format of the
link layer address to specify the channel characteristics. The old
format is still supported and opens UBR channels.
- Move isa/ppc* to sys/dev/ppc (repo-copy)
- Add an attachment method to ppc for puc
- In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms. Testers
wanted.
PR: 38372 (in spirit done differently)
Verified by: Make universe (if I messed up a platform please fix)
/rescue, from section 7 to section 8. The old rescue.7 file has been
simply subjected to "cvs rm", as there is no history to preserve.
Update the release documentation accordingly.
Requested by: njl, ru
Most text by: Tim Kientzle <kientzle@acm.org>
Reviewed by: ru, doc@
Approved by: ceri (mentor)
for the harp(4) pseudo driver and for loadable native HARP drivers
(like hfa_pci).
To use harp(4) the rc variable natm_interfaces must be set to the
list of NATM interfaces to be used for HARP. These interfaces
will be brought up with ifconfig and the harp(4) will be loaded.
To use loadable native HARP drivers atm_load must be set to
the list of drivers to load.
Reviewed by: mtm, gordon (partly)
The release.9 target is now responsible only for generation of MFS root
file systems, that are built for all architectures, even those that do
not provide a floppy installation option. The release.10 target is now
responsible for creation of a set of boot, MFS root, and fixit floppies,
and the NO_FLOPPIES variable now affects only this target.
Also, replaced the FIXIT_TARGET variable with a check of whether the
*FIXITSIZE variables are present for a given architecture, similar to
how this is done when generating boot floppies.
Discussed with: jhb
it attaches to all existing NATM network interfaces in the system
and creates a HARP physical interface for each of them. This allows
us to use the same set of ATM drivers for all ATM stuff. It is
possible to use the same interface for HARP, NATM and netgraph at the
same time.
large to huge amounts of small or medium sized receive buffers. The problem
with these situations is that they eat up the available DMA address space
very quickly when using mbufs or even mbuf clusters. Additionally this
facility provides a direct mapping between 32-bit integers and these buffers.
This is needed for devices originally designed for 32-bit systems. Ususally
the virtual address of the buffer is used as a handle to find the buffer as
soon as it is returned by the card. This does not work for 64-bit machines
and hence this mapping is needed.
- MN-110 10/100 USB ethernet (ADMtek Pegasus II, if_aue)
- MN-120 10/100 cardbus (ADMtek Centaur-C, if_dc)
- MN-130 10/100 PCI (ADMtek Centaur-P, if_dc)
Also update dc(4) man page to mention support for MN-120 and MN-130.
for targets that have been unsupported since April:
- upgrade
- aout-to-elf
- aout-to-elf-build
- aout-to-elf-install
- move-aout-libs
Approved by: imp
is common in British English, while "toward" is the preferred form in
American English. Use the American form for consistency.
Correct the date on the manual page.
Submitted by: Tom Rhodes <trhodes@freebsd.org>,
underway@comcast.net (Gary W. Swearingen)
(though probably not a good idea in general) to set the various
SENDMAIL_*_MC variables to /etc/mail/sendmail.mc or /etc/mail/submit.mc.
MFC after: 5 days
This is simpler, and is easy to do now that make(1) supports substituting
regexps. Fixed missing '$' anchor in the regexp. Use less cryptic names
for temporary variables.
Submitted by: ru (early version)
Reviewed by: ru
All .s files that need cpp(1) processing (see gcc(1) manpage's
DESCRIPTION section) have been repo-copied to .S files. This
is mostly to bring bsd.lib.mk in agreement with sys.mk.
Desired by: obrien
symbols from object files has bitrotted over the last
thirteen years, and it now does more harm than good.
An attempt to work around the problems caused by using
ld(1) for stripping was to pass LDFLAGS to the ld(1)
command, but this was not right either as ${LDFLAGS}
should, by design, be used with cc(1) and not ld(1).
One of the proposed solutions was to use the objcopy(1)
utility to do the strip work, and the other would be to
use strip(1), but Bruce Evans suggested not stripping
any symbols at all. This works by leaving the grunt
work to the final strip(1) command (when installing the
binary).
Submitted by: bde
components. This is generally considered a non-optimal solution but
it gets the job done for the /rescue case.
Submitted by: Tim Kientzle <kientzle@acm.org>
This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.
Approved by: jeff (mentor)
The matcd.4 man page has been upgraded to reflect current 5.1.x
functionality, and efforts were made to match the style and layout found
in similar-single purpose block drivers man pages found in the 5.1 tree
man4 area while not losing useful information. However, the documentation
folks should still take a look, since the man pages used as guides were
somewhat inconsistent on a variety of points.
Approved by: markm(mentor)
Remove a reference to the defunct macro M_COPY_PKTHDR;
document the new functions m_dup_pkthdr() and m_move_pkthdr(),
and the macro variant of the latter, M_MOVE_PKTHDR().
- tagging plaintext "mbuf", "mbuf cluster", and "mbuf chain"
with .Vt (variable type) since all of them are ways of managing
data, i.e., they can be seen as data types;
- using .Vt/.Va instead of .Li (literal) where appropriate;
- tagging plaintext words that actually refer to function arguments
with .Fa.
Suggested by: ru
uses alloca() and alloca is impossible to implement as a callable function
on amd64. It has to be a compiler builtin. Note that the bigger problem
is that libc is not c99 clean internally.
bus_dmamap_sync() by OR'ing them together.
- Don't document what BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE and
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE is supposed to do when
passed to bus_dmamap_sync(). There are other possible combinations
and the reader just needs to know what the individual flags do and
that he can combine different DMA operations.
- Use .An when listing authors.
Reviewed by: hmp
man page. This will be more scaleable as more driver man pages hit
the tree. Add also a description on how to do this configuration
in the rc.conf script.
toggle several media options (sonet/sdh, for example) with ifconfig and
to see the carrier state in ifconfig's output. It gives also read/write
access (given the right privilegs) to the S/Uni registers to user space
programs.
discipline to Random Early Detection (RED) in the future. The same para
incorrectly spelt ``Random Early Detection'' as ``Random Early Drop''.
While I am there, nuke IF_ENQ_DROP from the list of functions. More
work will be done on this, since some of the functions like
if_enq_drop() and if_queue_drop() were replaced with one function
called if_handoff() that does the job of enqueing the packet and
updating interface statistics as necessary.
Reviewed by: wollman
Approved by: des (mentor)
MFC after: 1 day
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
from NetBSD, and changed slightly to account for FreeBSD specifics.
- Hook them up to the build.
- Add them to the list of miibus-using drivers in miibus(4).
PCI bus interface. I have made some modifications to this manual
page, so it looks a bit different from the original version that
was posted to me.
Submitted by: Bruce M. Simpson <bms@spc.org>
Reviewed by: imp, mdodd (early copy)
Approved by: des (mentor)
MFC after: 3 days
