Zybo needs its own DTB and has a different PHY, so add it to
the base kernel. Details on building bootable SD images at
http://www.thomasskibo.com/zedbsd/
Submitted By: Thomas Skibo
the temporary file to vers.c at the end of the script
The previous logic wrote out to vers.c multiple times, so the file
could be incorrectly interpreted as being completely written out
after one of the echo calls with recursive make, when in reality it
was only partially written.
Also, in the event the build was interrupted when creating vers.c
(small race window), it would have a leftover file that needed to
be cleaned up before resuming the build.
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
bytes of boot2. Since we're in 16-bit mode, we can't copy all 128kB at
once; instead we loop four times and copy 32 kB each time.
This change was made necessary by an upcoming increase in the size of the
boot2 binary; should it increase further, the COPY_BLKS value can be
adjusted without anyone needing to remember 8086 assembly language again.
Requested by: allanjude
Tested by: allanjude
MFC after: 1 week
hold the kernel, modules, and any other loaded data. This memory block
is relocated to the kernel's expected location during the transfer of
control from the loader to the kernel.
The GENERIC kernel on amd64 has recently grown such that a kernel + zfs.ko
no longer fits in the default staging size. Bump the default size from
32MB to 48MB to provide more breathing room.
PR: 201679
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3666
no option but to use the smbios information to fill in the blanks.
It's a good thing UGA is a protocol of the past and GOP has all the
info we need.
Anyway, the logic has been tweaked a little to get the easier bits
of information up front. This includes the resolution and the frame
buffer address. Then we look at the smbios information and define
expected values as well as the missing bits (frame buffer offset and
stride). If the values obtained match the expect values, we fill in
the blanks and return. Otherwise we use the existing detection logic
to figure it out.
Rename the environment variables from uga_framebuffer abd uga_stride
to hw.efifb.address and hw.efifb.stride. The latter names are more
in line with other variable names.
We currently have hardcoded settings for:
1. Mid-2007 iMac (iMac7,1)
2. Late-2007 MacBook (MacBook3,1)
striking a delicate balance between exhaustive searching and
banking on assumptions. The environment variables can be used
as a fall-back anyway. With this change, all known and tested
Macs with only UGA should have a working console out of the
box... for now...
in the frame buffer when we flip pixels. Allow the detection
to be bypassed by setting the uga_framebuffer and uga_stride
variables. The kernel console works fine even when we can't
detect pixel changes in the frame buffer, which indicates
that the problem could be with reading from the frame buffer
and not writing to it.
PCI BARs does not necessarily correspond to the upper-left
most pixel. Scan the frame buffer for which byte changed
when changing the pixel at (0,0).
Use the same technique to determine the stride. Except for
changing the pixel at (0,0), we change the pixel at (0,1).
PR: 202730
Tested by: hartzell (at) alerce.com
so they were disabled during DTS transition. Though there are
no standard devices/drivers on them people might use iic(4) userland
interface to access these buses.
command called 'uga' to show whether UGA is implemented by the
firmware and what the settings are. It also includes filling
the efi_fb structure from the UGA information when GOP isn't
implemented by the firmware.
Since UGA does not provide information about the stride, we
set the stride to the horizontal resolution. This is likely
not correct and we should determine the stride by trial and
error. For now, this should show something on the console
rather than nothing.
Refactor this file to maximize code reuse.
PR: 202730
command has the following sub-commands:
list - list all possible modes (paged)
get - return the current mode
set <mode> - set the current mode to <mode>
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
"fdt_file" and "fdtfile" U-Boot variables. Add one more check for
"fdt_file" loader(8) variable.
loader(8) variable takes precedence over u-boot env one
like RPI-B and RPI-2.
Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.
Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.
MFC after: 2 weeks
There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files
PR: 183765
Submitted by: Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by: dteske, loos, eadler
Approved by: bapt (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3176
For example, without this patch, the following three lines
in /boot/loader.conf would result in /boot/root.img being preloaded
twice, and two md(4) devices - md0 and md1 - being created.
initmd_load="YES"
initmd_type="md_image"
initmd_name="/boot/root.img"
Reviewed by: marcel@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3204
but it's hard to find and easy to miss.
Reviewed by: wblock@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3183
The UEFI loader on the 10.1 release install disk (disc1) modifies an
existing EFI_DEVICE_PATH_PROTOCOL instance in an apparent attempt to
truncate the device path. In doing so it creates an invalid device
path.
Perform the equivalent action without modification of structures
allocated by firmware.
PR: 197641
MFC After: 1 week
Submitted by: Chris Ruffin <chris.ruffin@intel.com>
The Allwinner SoC has an AHCI device on its internal main bus rather
than the PCI bus. This SoC is somewhat underdocumented, and its SATA
controller is no exception. The methods to support this chip were
harvested from the Linux Allwinner SDK, and then constants invented to
describe what's going on based on low-level constants contained in the
SATA standard and guess work.
This SoC requires a specific AHCI channel setup in order to start the
operations on the channel properly.
Clock setup and AHCI channel setup idea came from NetBSD.
Tested on Cubieboard 2 and Banana pi (and attachment on Cubieboard by
Pratik Singhal).
Differential Revision: https://reviews.freebsd.org/D737
Submitted by: imp
Reviewed by: imp, ganbold, mav, andrew
- Add prototype for boot2 main()
- Don't make assignment within if statement, split it into two.
No functional or binary change -- verified with sha256(1).
MFC after: 2 weeks
function, which is expected to set returned env to NULL upon reaching the end
of the environment list but fails to do so in certain cases. The respective
u-boot code looks like the following (HEAD at the time of this commit):
--- api.c ---
496 static int API_env_enum(va_list ap)
...
510 *next = last;
511
512 for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
513 for (n = i; env_get_char(n) != '\0'; ++n) {
514 if (n >= CONFIG_ENV_SIZE) {
515 /* XXX shouldn't we set *next = NULL?? */
516 return 0;
517 }
518 }
-------------
The net result is that any unfortunate user of the loader's ub_env_enum()
function hitting this condition would be trapped in the infinite loop, as
the main use pattern of ub_env_enum() is basically the following:
while ((env = ub_env_enum(env)) != NULL) { DO STUFF }
Which would stuck forever with the last element.
