adding this major feature to the driver. Secondly, this updates the base
driver with new 20G device support, and with the new firmware levels some
changes to link handling and initialization were required.
MFC after: 1 week
Preliminary tests indicate 32 Mpps on tx, 24 Mpps on rx
with source and receiver on two different ports of the same 40G card.
Optimizations are likely possible.
The code follows closely the one for ixgbe so i do not
expect stability issues.
Hardware kindly supplied by Intel.
Reviewed by: Jack Vogel
MFC after: 1 week
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
if_ixl to version 1.3.0, if_ixlv to version 1.2.0
- Major change in both drivers is to add RSS support
- In ixl fix some interface speed related issues, dual
speed was not changing correctly, KR/X media was not
displaying correctly (this has a workaround until a
more robust media handling is in place)
- Add a warning when using Dell NPAR and the speed is
less than 10G
- Wrap a queue hung message in IXL_DEBUG, as it is non-fatal,
and without tuning can display excessively
MFC after: 1 week
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
-Improved VF stability, thanks to changes from Ryan Stone,
and Juniper.
- RSS fixes in the ixlv driver
- link detection in the ixlv driver
- New sysctl's added in ixl and ixlv
- reset timeout increased for ixlv
- stability fixes in detach
- correct media reporting
- Coverity warnings fixed
- Many small bug fixes
- VF Makefile modified - nvm shared code needed
- remove unused sleep channels in ixlv_sc struct
Submitted by: Eric Joyner (committed by jfv)
MFC after: 1 week
and code to make the code compile.
Give the function seems to be slightly mixed with csum and tso,
make it non-fatal if we try to setup thing on a kernel without IP
support. In practise the printf on the console will probably still
make your machine unhappy.
MFC after: 3 days
X-MFC with: r270755
- It was decided to change the driver name to if_ixl for FreeBSD
- This release adds the VF Driver to the tree, it can be built into
the kernel or as the if_ixlv module
- The VF driver is independent for the first time, this will be
desireable when full SRIOV capability is added to the OS.
- Thanks to my new coworker Eric Joyner for his superb work in
both the core and vf driver code.
Enjoy everyone!
Submitted by: jack.vogel@intel.com and eric.joyner@intel.com
MFC after: 3 days (hoping to make 10.1)
